trinityboringsolutions.com

Cameron Texas Directional Boring: Minwells Soil, BNSF Railway and Little River

Quick Answer: For a US 77 crossing, Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD); the City of Cameron runs the water system, and we verify the electric line owner before setting a route. Cameron is 350 road miles from our Yukon, Oklahoma main office, with Travis Avenue among the streets a route may follow. Minwells soil maps as fine sandy loam at the surface, but sandy clay dominates at about 40 inches, so the reamer needs staged passes through sticky ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cameron bores at a glance

  • County seat of Milam County, Texas. Population 5,527 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 350 miles, about 6.8 hours of driving.
  • Ground: Minwells soil is mapped on 63 percent of the area, with sandy clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: US 77, US 190, Texas State Highway 36, FM 845 and FM 1600. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: BNSF Railway, with 12 mapped street and rail crossings.
  • Public water: City of Cameron, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Little River in Cameron?

Trinity Boring Solutions takes directional boring work in Cameron, Milam County, where the Census Bureau Vintage 2024 estimate puts the population at 5,527. Along streets such as Travis Avenue or 4th Street, we install water, sewer, gas, electric conduit and fiber lines by boring beneath surface obstacles instead of opening a trench through them.

Our main office is in Yukon, Oklahoma, and Cameron work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet under the Arkansas River in Tulsa, showing the range behind a typical Cameron route along US 190. Local work is sized to the line, from 3/4 inch service lines to 48 inch casing.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Cameron Minwells soil present?

Cameron is mapped mostly as Minwells fine sandy loam, which covers 63 percent of the city area in the USDA soil survey. That surface description changes with depth: at about 40 inches, 63 percent of the mapped area is sandy clay, and the average clay content there is 43 percent. For Cameron boring plans, we treat mapped soil patterns as planning context, not as test borings. For a route near 4th Street, expect the deeper clay to cling to the reamer and potentially grip pipe, so the drilling fluid and reaming sequence matter.

USDA soil survey, inside the Cameron city limitsWhat is mapped
Soil series mappedMinwells 63 percent, Wilson 11 percent, Branyon 6 percent, Seawillow 6 percent and Houston Black 5 percent
Texture at the surfacefine sandy loam 63 percent, loam 17 percent and clay 17 percent
Texture about 40 inches downsandy clay 63 percent, clay 28 percent and loam 6 percent
Engineering class about 40 inches downclayey sand (SC) 63 percent, fat clay (CH) 28 percent and lean clay (CL) 8 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel31 percent of the area

Bedrock is mapped within 60 inches across 3 percent of Cameron, so it is not mapped in the top five feet over most of the city; the map does not rule out deeper rock. Seasonal water table soils are not mapped, while flood prone soils cover 3 percent. High steel corrosion risk is mapped across 31 percent, a concern for steel casing and tracer wire that the line owner should address. The geologic map shows Cenozoic terrace deposits of sand, silt, clay and gravel, plus Paleocene sedimentary rock; ground can change along a route.

How do crews bore Cameron’s sandy clay?

In Cameron, we manage sandy clay with controlled fluid and staged reaming, because Minwells soil becomes clay rich at about 40 inches and can stick to the tooling or grip the pipe.

  1. For Minwells soil, we use thinner drilling fluid with polymer and ream in stages to limit sticky clay buildup on the tooling.
  2. Because sandy clay can grip the pipe, we plan the pullback with the reaming sequence so the line is ready when the hole is opened.
  3. We pothole every marked utility on the bore path before the drill approaches it; paint near Travis Avenue marks position, not depth.
  4. A walkover locator tracks the drill head as it advances, while we record depth and pitch for a route near US 77.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line in Cameron near BNSF Railway?

US 77 has 4.4 mapped roadway miles in Cameron, while US 190 and Texas State Highway 36 each have 3.5. FM 845, FM 1600 and FM 2269 also run inside the limits, and no highways are listed within 1.5 miles outside them. Travis Avenue, Fannin Avenue and 4th Street are among the longest named streets. A route across these roads needs to account for pavement and the road owner, with a bore keeping the surface intact where the plan allows.

CrossingTypeMapped extentWho has a say
US 77US highway4.4 roadway miles insideState highway office
US 190US highway3.5 roadway miles insideState highway office
Texas State Highway 36State highway3.5 roadway miles insideState highway office
FM 845State highway1 roadway miles insideState highway office
FM 1600State highway0.8 roadway miles insideState highway office
FM 2269State highway0.1 roadway miles insideState highway office
BNSF RailwayRailroad2.95 track miles insideThe railroad
Little RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Sandy CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Big Elm CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Bear CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Green LakeLake or pond13 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 2.95 track miles inside Cameron, and public mapping shows 12 street and rail crossings in the city. A crossing beneath its track needs an agreement from BNSF Railway that sets the crossing conditions. Little River runs along or touches the city boundary, while Sandy Creek, Big Elm Creek and Bear Creek are within 0.8 miles. No named stream crossings are mapped inside the city; Green Lake is outside the limits but within one mile.

Who has to sign off on a Cameron bore under US 77?

For US 77 and the other state routes in Cameron, TxDOT reviews utility work through the Bryan District, and the utility owner submits the application in TxDOT’s online RULIS system. We prepare the bore plan and profile for that owner and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement; the permit sets cover requirements, including 60 inches for electric and communication crossings and 60 inches for water crossings. Cameron’s incorporated city streets belong to the city itself. A bore beneath BNSF Railway also needs the railroad’s agreement, and a Little River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Cameron water system?

The City of Cameron owns the public water system, which uses surface water and serves 5,489 people through 4,276 service connections. Those figures help identify the system to coordinate with near a proposed route, but each existing line still needs to be located. Electric service reported in Milam County comes from Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of CameronPublic water systemSurface water4,276 connections, 5,489 people served
Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric CooperativeElectric utilities reporting service in Milam CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Cameron’s median housing year at 1973; 25 percent of homes were built before 1960, 66 percent from 1960 to 1999 and 9 percent in 2000 or later. That mix can mean replacement work as well as new services along Travis Avenue. Before drilling near any marked utility, we expose it by hydrovac potholing; for a proposed line under Travis Avenue, paint alone does not show the line’s depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Cameron in relation to Temple and nearby towns?

Cameron is the Milam County seat, 409 feet above sea level, and covers 5.24 square miles in ZIP code 76520. Ben Arnold is 6.3 miles north, Buckholts is 9.1 miles west, Burlington is 10.0 miles north, Milano is 13.0 miles southeast and Rockdale is 14.3 miles south. Temple, the nearest larger city, is 29.7 miles northwest. The Yukon, Oklahoma main office is 350 road miles away, a 6.8 hour drive, so distance is part of planning a Cameron mobilization.

Places near Cameron

What would we bore near 4th Street in Cameron?

  • Highway crossing: A route beneath US 77 uses boring or tunneling under existing pavement and follows the requirements in the TxDOT utility permit.
  • Water service: A new service near Travis Avenue can connect toward the City of Cameron system after the line owner and existing utilities are identified.
  • Fiber conduit: A run along 4th Street can pass beneath pavement and driveways without cutting the traveled surface.
  • Rail crossing: A bore beneath the BNSF Railway tracks needs the railroad’s agreement to set crossing conditions for the proposed line.
  • Creek crossing: A route near Little River needs depth planning beneath the channel and a jurisdiction check during planning.
  • Airport service: A line near Cameron Municipal Airpark can be routed by boring to avoid opening the surface along its planned path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring on Travis Avenue in Cameron?

For a Cameron quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us assess a route near Travis Avenue or US 77. Those details show where the work sits and what the bore must pass beneath.

Minwells soil is the first ground factor: sandy clay at about 40 inches can cling to the reamer and affect the fluid and reaming plan. Length and pipe or conduit size also shape the work. Crossings of US 77 or BNSF Railway can add coordination and design needs, while pavement, drainage crossings, pits and excavator time affect the setup. Cameron’s 350 road miles from Yukon also affect mobilization, and high profile or emergency work can change the scope.

Questions people ask about boring in Cameron

Does Trinity Boring Solutions take directional boring jobs in Cameron and Milam County?

Yes, Trinity Boring Solutions takes directional boring work in Cameron and across Texas. Cameron jobs are handled by our own crews or from satellite yards run by vetted partner drilling contractors, without a local office. You work with Trinity from the first call through the bore log, whether the route is near Travis Avenue or elsewhere in Milam County.

Will a Cameron bore hit rock beneath Minwells soil?

A bore may encounter rock at depth, but the map does not show bedrock in the top five feet across most of Cameron. The USDA soil survey maps bedrock within 60 inches across 3 percent of the area, while the geologic map identifies Cenozoic terrace deposits and Paleocene sedimentary units. A site route still needs its own assessment.

Who approves a Cameron bore beneath US 77?

TxDOT’s Bryan District reviews utility work on US 77 in Cameron. The utility owner submits the application through TxDOT’s online RULIS system, while we prepare the bore plan and profile for that filing. The issued permit sets the requirements for the crossing, including the specified cover and installation method beneath existing highway pavement.

What does a Cameron bore beneath BNSF Railway require?

A bore beneath the 2.95 track miles of BNSF Railway in Cameron needs an agreement with BNSF Railway. That agreement establishes the crossing conditions, including casing, depth and flagging. The railroad’s tracks are part of the route planning, just as the 12 mapped street and rail crossings show that rail interfaces occur within the city.

Can a line be bored under Little River near Cameron?

A line can be planned beneath Little River, which runs along or touches Cameron’s boundary, but the route needs to stay below the channel. For Cameron crossings, we check whether the route falls under US Army Corps of Engineers jurisdiction during planning. Sandy Creek, Big Elm Creek and Bear Creek are also nearby, so the actual route matters.

Who operates Cameron’s public water system, and what is its water source?

The City of Cameron owns the public water system, and its source is surface water. We account for a system serving 5,489 people through 4,276 service connections when planning underground work in Cameron. For a proposed bore near Travis Avenue, the specific water line still needs to be identified and located before the route is set.

How much notice does Texas811 need for a Cameron bore on Travis Avenue?

For a bore along Travis Avenue, the locate request goes to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If Cameron’s start slips more than 14 days past the original notice, we submit a new request. When marks wear off or shift on Cameron work, we request refreshed marks through Texas811 before continuing.

Does Cameron’s distance from Temple change a bore mobilization from Yukon?

Cameron is 350 road miles and a 6.8 hour drive from Trinity’s Yukon, Oklahoma main office; Temple is 29.7 miles northwest of Cameron. The Yukon distance affects mobilization planning, while the route, soil and crossings still determine the work itself. A Travis Avenue job and a US 77 crossing may need different plans.

What affects the cost of directional boring near US 77 in Cameron?

The job’s length, pipe or conduit size and Cameron’s sandy clay all affect the scope, as do crossings of US 77, pavement, drainage and the need for pits or excavator time. BNSF Railway coordination can also shape a route. Mobilization from the Yukon office is another consideration because Cameron is 350 road miles away.

Where the Cameron facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cameron

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cameron, Texas

Type the address of your job in Cameron. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cameron

Same county: Thorndale · Gause · Praesel. All counties: Texas county list.