Gause Texas Directional Boring: Rader Loamy Fine Sand, Union Pacific, Copperas Branch
Quick Answer: Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), beneath US 190 and the Union Pacific track in Gause, Texas. Cherry Street and North Arendell are long local streets; our Yukon main office is 370 road miles away. Rader soil covers 48 percent of mapped ground, and sandy clay is mapped at 40 inches across 65 percent. That clay can grip a reamer, so staged passes matter near US 190.
Gause bores at a glance
- Unincorporated community in Milam County, Texas. Population 275 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 370 miles, about 7.1 hours of driving.
- Ground: Rader soil is mapped on 48 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 7 percent of the area.
- Highways inside the boundary: US 190, US 79 and FM 2095. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Public water: Gause Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring on Cherry Street in Gause?
Yes, Trinity Boring Solutions takes directional boring and horizontal directional drilling (HDD) work in Gause, Milam County, including water, sewer, gas, electric conduit and fiber routes beneath Cherry Street and US 190. Cherry Street, Circle Drive and North Arendell lead Gause’s street list; 11.17 public road miles lie inside the mapped community boundary, alongside US 190, US 79 and FM 2095. The Census Bureau counted 275 people in 2020 and does not publish yearly estimates for unincorporated places.
Our main office is in Yukon, Oklahoma, and Gause work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that scale, a typical Gause scope is a shorter service or conduit route planned around Rader soil and a crossing at US 190 or the Union Pacific track.

How does Gause’s Rader soil affect a bore?
The USDA soil survey maps Rader soil across 48 percent of Gause, with Rader loamy fine sand on 1 to 3 percent slopes as the largest map unit. Loamy fine sand is the surface texture across 80 percent of the mapped area, but the material changes lower down. At about 40 inches, sandy clay is mapped across 65 percent and clay across 22 percent; average clay content at that depth is 41 percent. In Gause, we treat mapped soil patterns as planning context, not as test borings for a directional boring route. The contrast means a bore may cut easily near the surface, then meet sticky ground that can cling to a reamer.
| USDA soil survey, inside the Gause mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Rader 48 percent, Travis 17 percent, Lufkin 12 percent, Gause 10 percent and Jedd 7 percent |
| Texture at the surface | loamy fine sand 80 percent, loam 13 percent and very gravelly sandy loam 7 percent |
| Texture about 40 inches down | sandy clay 65 percent, clay 22 percent and bedrock 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 60 percent, clayey sand (SC) 20 percent and fat clay (CH) 12 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 7 percent of the area (0 percent hard rock, 7 percent weathered rock) |
| Seasonal water table within 60 inches | 49 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 60 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 7 percent of Gause, and that mapped bedrock is weathered rather than hard; the typical depth is 25 inches. A seasonal water table is mapped within 40 inches across 49 percent, while flood prone soils cover 1 percent. High steel corrosion risk is mapped across 60 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The Eocene Reklaw Formation includes sandstone and clay, a reason to watch for changes in drilling response along a route.
How do we drill Gause’s sandy clay?
In Gause, sandy clay mapped at about 40 inches calls for controlled fluid and staged reaming. We track the drill head from the surface and log depth and pitch as the route advances beneath local streets such as Olive.
- Rader loamy fine sand covers 48 percent of mapped ground, so we manage fluid and use staged reaming to help keep the open section stable.
- With sandy clay mapped at 40 inches across 65 percent of the area, we watch returns and control pressure to avoid lifting pavement near US 190.
- Before the drill nears any marked line, we hydrovac pothole that utility; for a proposed crossing beneath Olive, we expose the marked lines on the bore path first.
- The seasonal water table is mapped within 40 inches across 49 percent of Gause, so we plan manageable pits and allow for pumping where the ground is wet.

What does a bore have to cross near Gause and Copperas Branch?
A Gause bore may need to pass beneath US 190, US 79 or FM 2095, all mapped inside the community boundary. Cherry Street, Circle Drive and North Arendell are among the longest named streets; Olive and Gause Boulevard are also mapped roads. The community has 11.17 public road miles in total. For a route beneath existing highway pavement, TxDOT rules call for boring or tunneling rather than an open trench. A plan also has to account for the road right of way and any marked lines along the chosen street.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 190 | US highway | 1.2 roadway miles inside | State highway office |
| US 79 | US highway | 1.2 roadway miles inside | State highway office |
| FM 2095 | State highway | 0.8 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.18 track miles inside | The railroad |
| Copperas Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Dollar Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Beaver Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Threemile Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific track runs 1.18 miles inside Gause, and three street and rail crossings are mapped in the community. A route under the track needs an agreement from Union Pacific covering the crossing conditions. No named streams are mapped inside the boundary, but Copperas Branch is 0.2 miles away and Dollar Creek is 0.5 miles away. Gause has 0.3 miles of unnamed drainage mapped inside the boundary, and no street crossings of named streams are mapped there; a nearby creek route is checked for federal water jurisdiction during planning.
Who has to sign off on a Gause bore in Milam County?
Gause is an unincorporated community in Milam County, so it has no city government to permit its streets. For work in the US 190, US 79 or FM 2095 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Bryan District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. A crossing of the Union Pacific track needs an agreement with the railroad, and TxDOT asks for a copy when a line also occupies highway right of way. Copperas Branch is checked for federal jurisdiction if a planned route crosses it.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Gause near Gause Water Supply Corporation?
Gause Water Supply Corporation uses groundwater wells and reports 276 service connections serving 828 people. That is a useful starting point for a water route, but the line owner and exact alignment still need confirmation before planning a conduit bore near Cherry Street or US 190. Electric utilities reporting service in Milam County are Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative. The provider for an individual Gause address is confirmed before an electric conduit route is set.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Gause Water Supply Corporation | Public water system | Groundwater wells | 276 connections, 828 people served |
| Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative | Electric utilities reporting service in Milam County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Gause’s median housing year at 1939 or earlier; 50 percent of homes were built before 1960, 34 percent from 1960 to 1999 and 16 percent in 2000 or later. That mix can mean a project replaces an older service or adds one for newer housing. For a proposed route beneath Olive, we hydrovac pothole each marked utility on the bore path before drilling near it; paint shows location, not depth.

Where is Gause in relation to Milano?
Gause is an unincorporated community in Milam County, 15.9 miles east of Cameron, the county seat and nearest larger city. It covers 1.02 square miles at an elevation of 376 feet and uses ZIP code 77857. Milano is 9.6 miles southwest, Hearne is 9.8 miles northeast, Calvert is 13.6 miles north and Lake Bryan is 15.8 miles east. From our Yukon, Oklahoma main office, Gause is 370 road miles away, a 7.1 hour drive; that distance is part of planning crew mobilization for a route near US 190.
Places near Gause
- Directional boring in Milano: 9.6 miles southwest
- Directional boring in Hearne: 9.8 miles northeast
- Directional boring in Calvert: 13.6 miles north
- Directional boring in Lake Bryan: 15.8 miles east
- Directional boring in Cameron: 15.9 miles west
What boring work comes up around Gause’s North Arendell?
- Highway crossing: A route beneath US 190 or US 79 can be bored under the pavement, with the plan accounting for the highway right of way.
- Water service: A service line near Cherry Street can connect with a route planned around Gause Water Supply Corporation’s groundwater system.
- Fiber conduit: A conduit route along North Arendell can be laid underground without cutting the street surface.
- Rail crossing: A line beneath the 1.18 miles of Union Pacific track in Gause needs a railroad agreement for its crossing conditions.
- Drainage crossing: A route near Copperas Branch needs depth and water jurisdiction considered during planning.
- Electric conduit: A proposed run near Olive starts with confirming the line owner among the utilities reporting service in Milam County.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for directional boring near Olive in Gause?
Send a map pin or address for the Gause route, because a location near Olive can have different access and crossings than one by Copperas Branch. For Gause work, we need the material entering the ground, pipe or conduit size, and footage. A sketch or plans help us trace the route and identify nearby roads, track or drainage before we scope the bore.
In Gause, soil and rock conditions lead the price factors: Rader ground changes with depth, and sandy clay can affect reaming and fluid control. The number of utilities to expose, pipe size and length matter too. A route under US 190 or Union Pacific track brings crossing requirements into the plan, while pavement, pits, excavator time and sand backfill affect the work. Mobilization is also shaped by the 370 road miles from Yukon; high profile or emergency work can add planning needs.
Questions people ask about boring in Gause
Does Trinity take directional boring jobs in Gause, Milam County, and who staffs them?
Yes, we take Gause work in Milam County and keep Trinity as the customer contact from the first call through the bore log. Our own crews handle jobs, and partner drilling contractors Trinity has vetted work from satellite yards. That model supports routes beneath Cherry Street and other Gause roads without suggesting a local office.
Does Rader soil in Gause create a steel corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 60 percent of Gause, including areas with Rader soil. The line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The right pipe depends on the line and its design, not on the soil map alone.
What ground should I expect along a Gause bore through Rader soil?
Rader soil is the largest mapped series in Gause, at 48 percent of the area. The USDA soil survey maps loamy fine sand at the surface across 80 percent, then sandy clay at about 40 inches across 65 percent. That lower clay can stick to a reamer, so the drilling plan accounts for changing ground.
Is rock likely on a Gause bore, and how much bedrock is mapped within five feet?
Bedrock is mapped within 60 inches across 7 percent of Gause, and the mapped material is weathered rather than hard. The typical mapped depth is 25 inches. A route may encounter softer rock, so the drill response can change; the map does not establish conditions at a particular Cherry Street address.
Who approves a Gause bore under US 190, and which TxDOT office reviews it?
A utility owner applies for a permit for work in the US 190 right of way through TxDOT’s RULIS system. The TxDOT Bryan District reviews the application. We prepare the bore plan and profile for the utility owner’s filing and work under the permit issued to that owner.
What does a Gause bore under Union Pacific track require?
A crossing under the Union Pacific track in Gause requires an agreement with the railroad. For Gause crossings, our agreement sets casing, depth and flagging conditions before we begin work. There are 1.18 track miles inside the mapped community boundary, so the planned route needs to identify whether it reaches the railroad right of way.
How far is Gause from the Yukon main office, and does Cameron affect the job?
From our Yukon, Oklahoma main office, Gause is 370 road miles and a 7.1 hour drive away. Cameron, the nearest larger city and county seat, is 15.9 miles west of Gause. The distance from Yukon affects mobilization planning for work near US 190 or another local route.
How much notice does Texas811 need for a Gause bore along Cherry Street?
For a bore along Cherry Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Gause work, if the start slips more than 14 days past the original notice, we make a new request. In Gause, we refresh worn or moved marks through Texas811 before underground work continues.
What affects directional boring cost in Gause near US 190?
The Gause job scope determines the price. Rader soil and sandy clay can affect drilling time, while a US 190 crossing, utility exposures, pavement, pits and backfill add work. Pipe size and bore length matter, as does mobilization across the 370 road miles from Yukon. High profile or emergency work can also change the plan.
Where the Gause facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gause
- U.S. Census Bureau, TIGER/Line 2024: Gause boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Gause population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gause housing units and year built
- Macrostrat geologic map compilation: map units under Gause
- U.S. EPA Safe Drinking Water Information System: public water systems serving Gause
- U.S. Department of Transportation, North American Rail Network: track owners in Milam County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Milam County
- U.S. Geological Survey, Elevation Point Query Service: Gause elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gause
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gause
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gause, Texas
Type the address of your job in Gause. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gause
Same county: Rockdale · Thorndale · Buckholts · Ben Arnold · Burlington · Praesel. All counties: Texas county list.
