LaCoste Texas Directional Boring: Montell Clay, FM 2790, Polecat Creek
Quick Answer: FM 2790 and the Union Pacific track are among the LaCoste obstacles we plan around when we do directional boring, also called horizontal directional drilling (HDD), in Texas. From our Yukon, Oklahoma main office, LaCoste is 503 road miles away, so a bore near Front Street needs mobilization planned with the site scope. The USDA soil survey maps Montell soil across 39% of town, and sticky clay can load a reamer and grip pipe during pullback. Polecat Creek crossings also need route and depth planning before equipment is set.
LaCoste bores at a glance
- Incorporated city in Medina County, Texas. Population 1,222 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 503 miles, about 9.7 hours of driving.
- Ground: Montell soil is mapped on 39 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2790 and FM 471. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Polecat Creek.
- Public water: City of LaCoste, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near FM 2790 in LaCoste?
We take directional boring work in LaCoste, Medina County, where the Census Bureau Vintage 2024 estimate puts the population at 1,222. Along FM 2790, Front Street or another route, our crews can install water, sewer, gas, electric conduit and fiber by boring where the alignment and access allow.
Our main office is in Yukon, Oklahoma, and LaCoste work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982, after our family business started in 1965; more than four decades at the drill informs how we manage the sticky Montell clay mapped around Front Street.

What ground should a bore expect in LaCoste’s Montell soil?
The USDA soil survey maps Montell soil across 39% of LaCoste, with Victoria soil at 22% and Knippa soil at 13%. Montell clay, Victoria clay and Knippa clay all appear in the mapped soils. Surface texture is clay across 75% of the area, while clay loam accounts for 18%. At about 40 inches below the surface, the survey maps clay across 77% of the area and reports average clay content of 48%. These are mapped patterns, not test borings; sticky clay can ball up on a reamer and grip pipe during pullback.
| USDA soil survey, inside the LaCoste city limits | What is mapped |
|---|---|
| Soil series mapped | Montell 39 percent, Victoria 22 percent, Knippa 13 percent, Castroville 8 percent and Monteola 7 percent |
| Texture at the surface | clay 75 percent, clay loam 18 percent and gravelly clay 7 percent |
| Texture about 40 inches down | clay 77 percent, silty clay loam 13 percent and clay loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 69 percent and lean clay (CL) 31 percent |
| Average clay content about 40 inches down | 48 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
The USDA soil survey maps no bedrock in the top five feet of LaCoste, which does not rule out rock deeper down. No seasonal water table is mapped within 60 inches, while flood prone soils cover 6% of the area, so a route near Polecat Creek still needs channel planning. High steel corrosion risk is mapped across 96% of the area; the line owner should weigh casing and tracer wire materials. The geologic map shows Alluvium, undivided, of Cenozoic age, and Late Cretaceous sedimentary material, including sand, chalk and mud.
How do we bore LaCoste’s clay without losing the line?
In LaCoste, we adjust the drilling fluid and reaming sequence for the mapped Montell clay, then track the head as the bore advances. That helps manage sticky returns and keep the route controlled near Front Street.
- Montell clay can cling to the reamer, so we use a thinner fluid blend with polymer, open the hole in stages and plan to pull pipe the same day.
- With heavy clay mapped around Front Street, we watch fluid returns and pressure so drilling fluid does not lift pavement over the bore.
- Before the drill approaches a marked line on an FM 471 route, we hydrovac pothole to expose it; surface paint shows location, not depth.
- Near Polecat Creek, we plan the bore below the channel as needed, track the head from the surface and log depth and pitch as it advances.

What does a LaCoste bore have to cross near Polecat Creek?
FM 2790 runs 1.9 mapped roadway miles inside LaCoste, and FM 471 runs 1.1 miles, so a route under either state road needs highway crossing planning. Front Street is the longest named street at 1.43 miles in the city, followed by Lytle-Lacoste Road at 1.25 miles and Castro Avenue at 0.83 miles. A bore can pass beneath pavement without cutting it, but the entry and exit pits still need a workable location beside the route.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2790 | State highway | 1.9 roadway miles inside | State highway office |
| FM 471 | State highway | 1.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.81 track miles inside | The railroad |
| Polecat Creek | Stream | 0.79 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Medina River | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.81 track miles inside LaCoste on its Del Rio Subdivision, and public maps show 3 street and rail crossings in the city. Polecat Creek has 0.79 channel miles inside the limits, with 8 mapped street crossings of named streams. The Medina River lies 0.3 miles from the city limits. No lakes or ponds are mapped within one mile, so creek and drainage routes matter more than a lake crossing here.
Do LaCoste bores under Union Pacific or FM 2790 need approval?
For work in the right of way of FM 2790 or FM 471, the utility owner needs a TxDOT utility permit. The TxDOT San Antonio District reviews the application, which the utility owner files through RULIS; we prepare the bore plan and profile for that filing. TxDOT rules require boring or tunneling beneath existing highway pavement, and the permit sets the applicable cover depth. A Union Pacific track crossing needs an agreement with the railroad, which sets crossing conditions. As LaCoste is incorporated, we plan bores beneath city streets with city ownership in mind. A Polecat Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines should we check in Medina County near LaCoste?
The local government owned City of LaCoste public water system uses groundwater wells and lists 496 service connections serving 1,488 people. For electric service, utilities reporting in Medina County include AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative. Those county reports do not identify the provider at each address, so we confirm the line owner before planning a conduit bore near the water system or an electric route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of LaCoste | Public water system | Groundwater wells | 496 connections, 1,488 people served |
| AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Medina County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put LaCoste’s median housing year at 1991; 21% of homes were built before 1960, 62% from 1960 to 1999 and 17% in 2000 or later. That mix can mean either replacement work near older Front Street services or new connections in newer areas. Before drilling near the City of LaCoste water lines or an electric conduit route, we hydrovac pothole marked utilities; paint gives position, not depth.

Where is LaCoste in relation to Castroville and our Yukon yard?
LaCoste is an incorporated city in Medina County, 21.3 miles east of county seat Hondo. It covers 0.63 square miles at an elevation of 717 feet, and its ZIP code is 78039. Castroville is 4.3 miles northwest; Lytle is 5.3 miles south. Lackland AFB is the nearest larger city listed, 12.8 miles northeast. From our Yukon yard, the road trip to LaCoste is 503 miles and 9.7 hours, a distance that makes mobilization part of planning for work on Front Street or FM 2790.
Places near LaCoste
- Directional boring in Castroville: 4.3 miles northwest
- Directional boring in Lytle: 5.3 miles south
- Macdona: 6.8 miles east
- Directional boring in Natalia: 9 miles south
- Von Ormy: 9.5 miles east
- Directional boring in Lackland AFB: 12.8 miles northeast
What boring work comes up around LaCoste’s Front Street?
- Highway crossing: A bore beneath FM 2790 or FM 471 keeps the road surface intact, with pits set beyond the travel lanes.
- Water service: A connection near the City of LaCoste water system needs a route checked against existing groundwater well distribution lines.
- Fiber conduit: A run along Front Street can pass beneath pavement while keeping the conduit route clear of marked utilities.
- Creek crossing: A Polecat Creek route needs depth planning below the channel and a check for federal waterway jurisdiction.
- Rail crossing: A bore under the Union Pacific Del Rio Subdivision needs the railroad’s crossing agreement and its conditions built into the plan.
- Street service: Work near D Hanis Avenue can use a bore to reach a property without opening a trench across the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near LaCoste’s D Hanis Avenue?
A map pin matters near D Hanis Avenue because the exact route determines whether a bore approaches a street, utility or creek crossing. For LaCoste city street work, send us the address or pin, what is going in the ground, pipe or conduit size, and footage. A sketch or plans can show the alignment and pit locations around the property.
The ground group includes length, pipe size and the Montell clay, which can affect reaming and pullback. Crossings add exposure and planning where a route meets FM 2790, Union Pacific track or Polecat Creek; pavement and concrete also change the work. Logistics include pits, excavator time, sand backfill and mobilization from the Yukon yard, 503 road miles away. For emergency or high profile work on LaCoste city streets, we allow for added planning demands. The route and access determine which factors apply.
Questions people ask about boring in LaCoste
Does Trinity Boring Solutions take directional boring jobs in LaCoste and Medina County?
Yes, we take directional boring work in LaCoste and Medina County. Our own crews and crews from satellite yards run by drilling contractor partners we have vetted can staff the work. You work with Trinity from the first call through the bore log, including for a route near FM 2790.
Is a LaCoste bore likely to hit rock?
Rock is not mapped within the top five feet of LaCoste, but that does not rule out deeper rock. The geologic map shows Alluvium, undivided, and Late Cretaceous sedimentary material such as sand, chalk and mud. A route near Polecat Creek still needs site specific planning.
Who approves a LaCoste bore beneath FM 2790?
The utility owner applies for the TxDOT utility permit, and the TxDOT San Antonio District reviews it. The owner files through RULIS while we prepare the bore plan and profile. For FM 2790, the permit covers the work in state highway right of way and sets applicable conditions.
What does a LaCoste bore beneath Union Pacific track require?
A bore under the Union Pacific track needs an agreement from the railroad that owns it. The agreement sets crossing conditions such as casing, depth and flagging. LaCoste has 0.81 track miles inside the city, so the crossing route and railroad requirements need to be addressed in the plan.
Can a line be bored under Polecat Creek in LaCoste?
A line can be planned beneath Polecat Creek, subject to the route, channel depth and site conditions. The creek has 0.79 channel miles inside LaCoste, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A bore avoids cutting across the creek bank.
Who operates LaCoste’s public water system, and where is its water sourced?
The local government owned City of LaCoste runs the public water system, and its source is groundwater wells. The system lists 496 service connections serving 1,488 people. We would check the route for existing water lines before planning work near Front Street.
Does Trinity cover Castroville and rural sites outside LaCoste?
Yes, we take work beyond LaCoste’s city limits, including routes toward Castroville and rural sites in the area. Castroville is 4.3 miles northwest of LaCoste. The address and route still matter, especially if the bore approaches Polecat Creek or a state highway.
How much notice does Texas811 need for a LaCoste bore along Front Street?
For a bore along Front Street, make the Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes this as at least two working days. If the start slips more than 14 days, make a new request; refresh worn or moved marks before work continues.
Near FM 2790 in LaCoste, what factors shape directional boring cost?
The price depends on the job details, not just the footage. Montell clay affects drilling and reaming; crossings of FM 2790, Union Pacific track or Polecat Creek can add planning and exposure work. Pipe size, pavement, pit work, excavator time and mobilization from Yukon also affect the scope.
Where the LaCoste facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside LaCoste
- U.S. Census Bureau, TIGER/Line 2024: LaCoste boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: LaCoste
- U.S. Census Bureau, American Community Survey 2019 to 2023: LaCoste housing units and year built
- Macrostrat geologic map compilation: map units under LaCoste
- U.S. EPA Safe Drinking Water Information System: public water systems serving LaCoste
- U.S. Department of Transportation, North American Rail Network: track owners in Medina County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Medina County
- U.S. Geological Survey, Elevation Point Query Service: LaCoste elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to LaCoste
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in LaCoste
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in LaCoste, Texas
Type the address of your job in LaCoste. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for LaCoste
Same county: Hondo · Devine · Lake Medina Shores · D'Hanis · Yancey. All counties: Texas county list.
