trinityboringsolutions.com

Lake Colorado City Texas Directional Boring: Miles Fine Sandy Loam, FM 2836 and Morgan Creek

Quick Answer: At Lake Colorado City, the USDA soil survey maps Miles fine sandy loam near the surface, with bedrock mapped within five feet across 22% of the community. Underlying mapped geology includes Quaternary red siltstone and shale clast loamy colluvium. We handle directional boring, also called horizontal directional drilling (HDD), for lines crossing Union Pacific track in Lake Colorado City. The Yukon main office is 359 road miles away, including travel to FM 2836. Sandy clay loam mapped at 40 inches can hold a bore hole, but sticky cuttings call for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lake Colorado City bores at a glance

  • Unincorporated community in Mitchell County, Texas. Population 636 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 359 miles, about 7.2 hours of driving.
  • Ground: Miles soil is mapped on 36 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 22 percent of the area.
  • Highways inside the boundary: FM 2836 and FM 1229. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: Union Pacific.
  • Named streams inside the boundary: Morgan Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 2836 in Lake Colorado City?

Trinity Boring Solutions takes directional boring work in Lake Colorado City, Mitchell County, including routes along FM 2836. The Census Bureau counted 636 people here in the 2020 Census; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines, including service routes along FM 1229 or Lake County Road 252.

Our main office is in Yukon, Oklahoma, and Lake Colorado City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, and we have been a family business since 1965 with directional boring work since 1982. Along FM 2836, that experience matters when a new conduit route must be planned around lines already in the ground, including electric infrastructure reported in Mitchell County.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does the Miles soil map show in Lake Colorado City?

The USDA soil survey maps Miles soil across 36% of Lake Colorado City, with Miles fine sandy loam, 1 to 3 percent slopes, covering 29% of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped across 40%, while clay loam covers 21%. The survey reports an average clay content of 30% at that depth. Fine sandy loam makes up 55% of surface texture, while clay loam makes up 21%. These are mapped patterns, not test borings, so a route near Bohannan Road still needs site specific planning.

USDA soil survey, inside the Lake Colorado City mapped community boundaryWhat is mapped
Soil series mappedMiles 36 percent, Latom 14 percent, Sagerton 11 percent, Pyron 9 percent and Spade 7 percent
Texture at the surfacefine sandy loam 55 percent, clay loam 21 percent and fine sand 4 percent
Texture about 40 inches downsandy clay loam 40 percent, clay loam 21 percent and bedrock 21 percent
Engineering class about 40 inches downclayey sand (SC) 34 percent and lean clay (CL) 27 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches22 percent of the area (14 percent hard rock, 8 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel10 percent of the area

The USDA soil survey maps bedrock within 60 inches across 22% of the area, including hard bedrock across 14% and weathered bedrock across 8%; a shallow rock contact can slow drilling or deflect the head. Seasonal water table and flood prone soils are not mapped for Lake Colorado City bore routes, so we plan around uncertain subsurface conditions. High steel corrosion risk is mapped across 10%, so the line owner should consider casing and tracer wire materials. The Quaternary red siltstone and shale clast loamy colluvium includes clay, siltstone and shale, while the underlying map also names the Triassic Dockum Group. A bore near Morgan Creek needs its own depth and ground review.

How is a bore run through sandy clay loam in Lake Colorado City?

We plan the bore for the mapped sandy clay loam and possible shallow bedrock in Lake Colorado City. Along FM 1229, the final method and depth depend on the route and exposed utilities.

  1. We review the Miles soil mapping along the proposed route; sandy clay loam at about 40 inches can hold the hole, while sticky cuttings favor controlled fluid and staged reaming.
  2. Where the mapped route approaches bedrock, including areas around Lake Colorado City, we allow for slower drilling and watch the soil to rock contact for steering changes.
  3. Before drilling near a marked line along County Road 246, we hydrovac pothole that utility; locate paint shows its position but not its depth.
  4. We track the drill head from the surface and log depth and pitch, then pull pipe while the bore is ready rather than leaving a sticky hole open.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Lake Colorado City near Union Pacific?

A Lake Colorado City bore may need to cross FM 2836 or FM 1229, both state highways inside the mapped community boundary. Interstate 20 and Texas State Highway 163 are each 0.1 miles outside it. Lake County Road 252 is the longest named street at 2.69 miles, followed by FM 1229 at 1.17 miles, County Road 246 at 0.56 miles and Bohannan Road at 0.51 miles. Route choice matters: pavement, driveways and existing lines affect where entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
FM 2836State highway10.8 roadway miles insideState highway office
FM 1229State highway4.5 roadway miles insideState highway office
Texas State Highway 163Highway nearby0.1 miles outsideState highway office
Interstate 20Highway nearby0.1 miles outsideState highway office
Interstate 20 BusinessHighway nearby0.7 miles outsideState highway office
Union PacificRailroad1.68 track miles insideThe railroad
Morgan CreekStream0.13 channel miles insideChecked for Corps of Engineers jurisdiction
Colorado RiverStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Rabbit HollowStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Lake Colorado CityLake or pond1,329 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.68 track miles inside Lake Colorado City, on its Toyah Subdivision, and no street and rail crossings are mapped in the community. A crossing of that track needs an agreement with Union Pacific, which sets crossing details. Morgan Creek runs 0.13 channel miles inside the boundary, with one mapped street crossing of a named stream. Lake Colorado City, the 1,329 acre lake, is also inside the community, so water crossings need review during planning.

Who permits a bore in Lake Colorado City, Mitchell County?

For a bore in Lake Colorado City, the state or county with authority over FM 2836, FM 1229 or a county road handles the relevant road approval; this unincorporated community has no city government. Work in state highway right of way needs a TxDOT utility permit reviewed by the Abilene District. The utility owner files through TxDOT’s RULIS system, while we prepare the bore plan and profile and work under the owner’s permit. TxDOT cover rules set 60 inches for electric or communication crossings and 60 inches for water crossings, measured below the lowest crossed grade. A Union Pacific track crossing requires its owner’s agreement, and Morgan Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines already in the ground in Mitchell County near Lake Colorado City?

Before planning a bore, we confirm the provider for a Lake Colorado City address with the county or local water district. Electric service reported in Mitchell County includes Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative. Those reports do not identify the provider at every address. We confirm the line owner before planning a conduit bore along FM 2836 or another route.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Mitchell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Lake Colorado City’s median housing year at 1974; we plan each underground route around site conditions. It estimates 24% of housing units were built before 1960, 65% from 1960 to 1999 and 11% in 2000 or later. That age range can mean a replacement route along FM 1229 must account for older buried lines as well as new service connections. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Lake Colorado City and nearby Westbrook?

Lake Colorado City is an unincorporated community in Mitchell County, centered around a 7.76 square mile mapped area at an elevation of 2,076 feet. Its ZIP code is 79512. Westbrook is 4.5 miles west, and Colorado City, the county seat, is 5.9 miles northeast. Loraine is 13.8 miles east and Coahoma is 22.0 miles west; Snyder is the nearest larger city, 25.4 miles north. Our Yukon yard is 359 road miles away, a 7.2 hour drive, so distance is part of planning work on FM 2836 or County Road 246.

Places near Lake Colorado City

What would we bore along Lake County Road 252 in Lake Colorado City?

  • Highway crossing: A bore under FM 2836 uses a planned route beneath pavement, with the utility owner arranging the TxDOT permit for state right of way work.
  • Water service: A new water line along Lake County Road 252 needs an address specific provider check and a route that accounts for existing service lines.
  • Fiber conduit: A fiber drop near FM 1229 can use a bore to avoid opening pavement, with marked utilities exposed before the drill approaches.
  • Creek crossing: A line near Morgan Creek needs depth planning and a check for possible Corps jurisdiction before the crossing is laid out.
  • Rail crossing: A route beneath Union Pacific track needs an agreement with the railroad owner, which sets crossing conditions for the bore.
  • Replacement bore: Near Bohannan Road, a replacement line can follow a new underground path while avoiding cuts to driveways and pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Lake Colorado City quote near Bohannan Road?

A map pin on Bohannan Road matters because the exact route determines which utilities, pavement or drainage features a bore must pass. For a bore near FM 2836, send us the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us see the path and pit locations, especially where the route approaches FM 1229 or Morgan Creek.

A short route in Miles soil with clear access can be simpler to plan than a longer bore under FM 2836 or Union Pacific track. Price also reflects pipe size, soil and rock, utilities that must be exposed, pavement, creek or drainage crossings, pits, excavator time and sand backfill. The 359 road miles from Yukon affect mobilization, while high profile or emergency work can add planning demands. A map pin near Lake County Road 252 helps us assess those conditions before setting the scope.

Questions people ask about boring in Lake Colorado City

Does Trinity Boring Solutions take directional boring jobs in Lake Colorado City, Mitchell County?

Yes. We take work in Lake Colorado City, Mitchell County, and staff it with our own crews or crews at satellite yards operated by drilling partners we have vetted. The customer works with Trinity from the first call through the bore log, regardless of which crew is at the site along FM 2836.

Who owns electric lines in Mitchell County near Lake Colorado City, and who confirms conduit specs?

Electric service reporters for Mitchell County include Oncor Electric Delivery Company and three cooperatives, but those reports do not identify the provider for every Lake Colorado City address. We confirm the specific line owner before planning a conduit bore near FM 1229, and the owner confirms the required conduit specifications.

Does the county or a city control County Road 246 in Lake Colorado City, and can we avoid cutting it?

Lake Colorado City is unincorporated and has no city government, so County Road 246 is not a city street. A directional bore can pass beneath a road without cutting its surface when the route and access allow it. The road authority’s approval must be addressed for the specific County Road 246 project.

How do older homes and buried lines near FM 1229 affect replacement bores in Lake Colorado City?

The American Community Survey 2019 to 2023 estimates a median housing year of 1974 in Lake Colorado City, with 24% of units built before 1960. Older areas along FM 1229 may have existing lines to locate before a replacement bore. We expose marked utilities by hydrovac potholing before drilling near them.

What ground does a bore pass through in Lake Colorado City’s Miles soil?

The USDA soil survey maps Miles soil across 36% of Lake Colorado City. At about 40 inches, sandy clay loam covers 40% of the mapped area. That ground can hold a bore hole, but clay in the mix can make cuttings sticky, so the fluid and reaming plan matter.

Is there rock near the surface where a bore is planned in Lake Colorado City?

The USDA soil survey maps bedrock within five feet across 22% of Lake Colorado City, with hard bedrock mapped across 14% and weathered bedrock across 8%. A route near Morgan Creek still needs site specific review because mapped conditions do not establish the exact depth of rock at a bore location.

What bore sizes and lengths can Trinity handle near Bohannan Road in Lake Colorado City?

We handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Bohannan Road still depends on access, ground and crossing conditions. Send the proposed size and footage so we can review the route and the work it requires.

How early should I call 811 for a bore along Lake County Road 252 in Lake Colorado City?

Texas811 needs the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a Lake County Road 252 start slips more than 14 days after the original notice, make a new request. If Texas811 marks are worn or moved on a Lake Colorado City bore route, we refresh them before continuing work.

What affects directional boring costs near FM 2836 in Lake Colorado City?

The route length, pipe size, soil and rock, utility crossings, pavement, pits and creek or drainage work all affect the scope. A bore under FM 2836 may involve state highway permitting, while Miles soil or nearby mapped bedrock can affect drilling plans. The 359 road miles from Yukon also factor into mobilization.

Where the Lake Colorado City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lake Colorado City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lake Colorado City, Texas

Type the address of your job in Lake Colorado City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lake Colorado City

All counties: Texas county list.