trinityboringsolutions.com

Menard Texas Directional Boring: Tarrant Soil, US 83 And Harris Hollow

Quick Answer: Can you get a line under US 83 or Harris Hollow without cutting it? Yes, we use directional boring, also called horizontal directional drilling (HDD), for those Menard crossings. Menard is 408 road miles from our Yukon, Oklahoma main office, so mobilization for a bore near Frisco Avenue is part of the job plan. Tarrant soil and clay loam make the hole sticky, calling for controlled fluid and staged reaming. We plan each route around the crossing and the mapped ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Menard bores at a glance

  • County seat of Menard County, Texas. Population 1,309 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 408 miles, about 8 hours of driving.
  • Ground: Tarrant soil is mapped on 40 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 44 percent of the area.
  • Highways inside the boundary: US 83, US 190, FM 2092 and RM 2291. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Harris Hollow, San Saba River, Menard Irrigation Company Canal and Celery Creek.
  • Public water: City of Menard, groundwater under the influence of surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can bore in Menard and Menard County?

Trinity Boring Solutions takes directional boring work in Menard, the Menard County seat, including water, sewer, gas, electric conduit and fiber routes beneath Frisco Avenue and other local streets. Can you get a line under US 83 or Harris Hollow without cutting it? We plan the bore around the crossing and the ground. The Census Bureau Vintage 2024 estimate puts Menard at 1,309 people, a small city where each route needs a clear plan.

Our main office is in Yukon, Oklahoma, and Menard work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been directional boring since 1982, bringing four decades of experience to the Tarrant soil and shallow mapped bedrock around Menard. We stay involved from the first call through the bore log, whichever crew is on site.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does Tarrant soil mean for a bore in Menard?

The USDA soil survey maps Tarrant soil across 40 percent of Menard and Frio soil across 37 percent, with Frio clay loam covering 27 percent of the mapped area. At about 40 inches below the surface, bedrock is the mapped texture for 44 percent of the area, while silty clay loam accounts for 40 percent. The survey reports average clay content of 36 percent at that depth and no sandy area there. Clay can cling to the reamer and grip pipe, so the drilling plan needs measured fluid and staged passes.

USDA soil survey, inside the Menard city limitsWhat is mapped
Soil series mappedTarrant 40 percent, Frio 37 percent, Rough broken land (miscellaneous area) 8 percent, Nuvalde 7 percent and Brackett 4 percent
Texture at the surfacevery cobbly clay 40 percent, clay loam 33 percent and silty clay loam 11 percent
Texture about 40 inches downbedrock 44 percent, silty clay loam 40 percent and very gravelly clay loam 8 percent
Engineering class about 40 inches downlean clay (CL) 44 percent and clayey gravel (GC) 9 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches44 percent of the area (40 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel78 percent of the area

The USDA soil survey maps bedrock within 60 inches across 44 percent of Menard, including hard bedrock in 40 percent and weathered bedrock in 4 percent. That makes the route and depth important: a rock bit or other rock tools may be needed where hard material is encountered. No seasonal water table is mapped within 60 inches, but flood prone soils cover 12 percent, so Harris Hollow and the San Saba River need careful crossing plans. High steel corrosion risk is mapped across 78 percent, making casing and tracer wire material a line owner decision; Menard’s very cobbly clay surface does not change HDPE’s resistance to soil corrosion, so we can specify it for underground runs. The geologic map also shows Early Cretaceous sedimentary rock.

How does Menard bedrock shape the boring method?

Menard’s mapped mix of Tarrant soil, silty clay loam and bedrock calls for checking the ground as the bore advances. We match the tooling and fluid to the material and the specific crossing.

  1. Tarrant soil and the mapped 36 percent average clay content at about 40 inches can make cuttings sticky, so we use measured fluid and staged reaming.
  2. Where the USDA soil survey maps bedrock near a Menard route, we check the drill response and shift to rock tooling if the material requires it.
  3. Before drilling near a marked line on Frisco Avenue, we expose it with hydrovac potholing; surface marks show location, not depth.
  4. At Harris Hollow, we plan the bore beneath the channel and account for the 12 percent of Menard mapped as flood prone soils.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which Menard roads or creeks might a bore cross near Harris Hollow?

US 83 and US 190 run through Menard, along with FM 2092 and RM 2291; Texas State Highway 29 is 1.3 miles beyond the city limits. Frisco Avenue is the longest named street at 1.43 miles, followed by Bevans Street at 1.03 miles and Tipton Street at 0.96 miles. Those roads make pavement and driveway crossings practical bore candidates, but the exact route determines the entry and exit pits. A crossing of US 83 also brings TxDOT right of way planning into the job.

CrossingTypeMapped extentWho has a say
US 83US highway2.8 roadway miles insideState highway office
US 190US highway2.1 roadway miles insideState highway office
FM 2092State highway0.8 roadway miles insideState highway office
RM 2291State highway0.1 roadway miles insideState highway office
Texas State Highway 29Highway nearby1.3 miles outsideState highway office
Harris HollowStream1.21 channel miles insideChecked for Corps of Engineers jurisdiction
San Saba RiverStream0.81 channel miles insideChecked for Corps of Engineers jurisdiction
Menard Irrigation Company CanalStream0.81 channel miles insideChecked for Corps of Engineers jurisdiction
Celery CreekStream0.16 channel miles insideChecked for Corps of Engineers jurisdiction
Volkmann DrawStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Las Moras CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Menard or within one mile outside the city limits, and none of the mapped street and rail crossings is present. Harris Hollow runs 1.21 channel miles in the city, while the San Saba River and Menard Irrigation Company Canal each run 0.81 channel miles. Menard has 26 mapped street crossings of named streams, so a route near Harris Hollow or Celery Creek may need a creek crossing plan. In Menard County, no lakes or ponds are mapped within one mile, helping us plan boring around mapped crossings.

Who approves a Menard bore under US 83?

For a bore in US 83, US 190, FM 2092 or RM 2291 right of way, the line owner files the utility permit through TxDOT’s online RULIS system, and the TxDOT San Angelo District reviews it. For a state permit, we give the line owner the bore plan and profile and work under that owner’s permit through the TxDOT San Angelo District. Under an existing highway, TxDOT requires boring or tunneling; a rural highway crossing must extend beneath all travel lanes. Electric and communication lines need 60 inches of cover at a crossing and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along it; pressurized sewer lines need 60 inches at crossings. Harris Hollow and other creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Menard water system?

The City of Menard public water system serves 1,471 people through 840 service connections and uses groundwater under the influence of surface water. A water bore near the system needs the line owner and route confirmed before drilling. Utilities reporting electric service in Menard County include AEP Texas North, Oncor Electric Delivery Company, Central Texas Electric Cooperative, Pedernales Electric Cooperative and Southwest Texas Electric Cooperative. We confirm the electric line owner for the specific address before planning conduit near Avenue D or another street.

Line ownerWhat it isSourceSize
City of MenardPublic water systemGroundwater under the influence of surface water840 connections, 1,471 people served
AEP Texas North, Oncor Electric Delivery Company, Central Texas Electric Cooperative, Pedernales Electric Cooperative and Southwest Texas Electric CooperativeElectric utilities reporting service in Menard CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Menard’s median housing year at 1955; 55 percent of homes were built before 1960, 40 percent from 1960 to 1999 and 5 percent in 2000 or later. That older housing stock can mean a replacement route near Bevans Street must work around existing services, while a new connection may need a different path. We hydrovac pothole each marked utility on the bore path before the drill approaches; for example, a line planned beneath Tipton Street needs marked lines exposed first because paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Menard and nearby Eden?

Menard is the incorporated county seat of Menard County, covering 2.06 square miles at an elevation of 1,877 feet. ZIP code 76859 serves Menard, where Frisco Avenue gives us a local reference for identifying underground work locations. Eden is 20.9 miles north, Melvin is 22.8 miles northeast, Brady is 29.3 miles northeast, Junction is 29.6 miles south and Mason is 35.0 miles east. Menard is 408 road miles and an 8.0 hour drive from our Yukon, Oklahoma main office, so that distance is part of planning a bore on US 83 or near Harris Hollow. We take work across Texas.

Places near Menard

Which jobs call for a bore near Menard’s Frisco Avenue?

  • Highway crossing: A bore beneath US 83 or US 190 can avoid cutting the paved travel lanes, subject to TxDOT permit and cover requirements.
  • Street service: A water or sewer route under Frisco Avenue can keep the street surface intact while connecting a property to a buried line.
  • Creek crossing: A route beneath Harris Hollow needs a planned entry and exit outside the channel and review for federal water jurisdiction.
  • Water service: A connection near the City of Menard system needs the existing water route confirmed before a new line is designed.
  • Electric conduit: A conduit bore near Avenue D starts with confirming the address specific electric line owner and exposing marked utilities.
  • Drainage crossing: A bore near the San Saba River needs a route that accounts for mapped flood prone soils and the channel.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Menard’s Avenue D?

For a Menard quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route near Avenue D matters because a paved street crossing, existing utilities or a nearby drainage channel can change the pits and drilling plan. We use those details to assess the work before scheduling a crew.

A short, clear route through clay loam away from pavement and Harris Hollow is simpler to plan than a longer crossing through rock or crowded right of way. Length, pipe size, soil and rock, utilities to expose, pavement, creek crossings and pit work all affect the scope. A route beneath US 83 adds TxDOT permit planning, while the 408 road miles from Yukon affect mobilization. High profile or emergency work can also change the plan.

Questions people ask about boring in Menard

Does Trinity Boring Solutions take jobs in Menard County, and who staffs a Menard bore?

Yes, we take directional boring work in Menard County and staff it with our own crews or vetted partner contractor crews working from satellite yards. Your contact with Trinity continues from the first call through the bore log. A route under Frisco Avenue is planned for its actual ground and crossing conditions.

Who owns the electric lines in Menard County, and who confirms conduit specs in Menard?

The specific electric line owner depends on the Menard address, so we confirm that owner before planning a conduit bore. AEP Texas North, Oncor Electric Delivery Company, Central Texas Electric Cooperative, Pedernales Electric Cooperative and Southwest Texas Electric Cooperative report service in Menard County. For a conduit route near US 190, the owner can confirm its line requirements.

Who controls Menard streets like Tipton Street, and can a bore avoid cutting one?

Menard is incorporated, so Tipton Street and other city streets belong to the city itself. A directional bore can pass beneath the street without cutting its surface, with entry and exit pits placed off the crossing where the site allows. The route still needs utility locating and exposure before drilling near marked lines.

Do older homes near Menard’s Bevans Street need replacement bores?

They may, depending on the condition and route of the existing service. The American Community Survey 2019 to 2023 estimates put Menard’s median housing year at 1955, with 55 percent of homes built before 1960. A replacement bore near Bevans Street should account for older buried lines and expose marked utilities before drilling.

Can Harris Hollow or wet ground affect bore pits in Menard?

Flood prone soils cover 12 percent of Menard, and Harris Hollow runs 1.21 channel miles in the city, so a creek side route needs careful pit placement and depth planning. No seasonal water table is mapped within 60 inches, but local conditions at the proposed crossing still guide pit setup and fluid control.

Does Menard’s Tarrant soil corrode steel, and what pipe can a bore use?

The USDA soil survey maps high steel corrosion risk across 78 percent of Menard, so the line owner should consider casing and tracer wire materials for a route through Tarrant soil. Menard’s very cobbly clay surface does not change HDPE’s resistance to soil corrosion, so we can specify it for underground runs. The right pipe depends on the line design and owner specifications, not just the soil map.

How much notice does Texas811 need for a bore near Menard’s Frisco Avenue?

Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays, and do not request the locate more than 14 days ahead. A Frisco Avenue ticket has a 20 day life under the stated timing. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

How far is Menard from Trinity’s Yukon office, and does that affect a Menard bore?

Menard is 408 road miles and an 8.0 hour drive from our Yukon, Oklahoma main office. That distance affects how we plan mobilization for a job near US 83 or the San Saba River. We review the bore route, materials and site access before arranging the crew.

What affects the cost of directional boring under US 83 in Menard?

The route, bore length, pipe or conduit size, soil and rock, utilities to expose, pavement, pits and creek crossings all affect the job scope. A US 83 crossing brings permit planning, while Tarrant soil and mapped bedrock can affect tooling and reaming. Mobilization also reflects Menard’s distance from Yukon.

Where the Menard facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Menard

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Menard, Texas

Type the address of your job in Menard. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Menard

All counties: Texas county list.