trinityboringsolutions.com

West Texas Directional Boring: Stephen Soil, Interstate 35 and Union Pacific

Quick Answer: Interstate 35 and Union Pacific tracks are major constraints for directional boring, also called horizontal directional drilling (HDD), in West, Texas. Trinity Boring Solutions takes this work across Texas; West is 282 road miles from our Yukon, Oklahoma main office, with Reagan Street among the routes to plan around. Stephen soil and silty clay dominate the mapped ground. That sticky clay can load a reamer and grip pipe, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

West bores at a glance

  • Incorporated city in McLennan County, Texas. Population 2,597 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 282 miles, about 5.4 hours of driving.
  • Ground: Stephen soil is mapped on 29 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 69 percent of the area.
  • Highways inside the boundary: Interstate 35, US 77, FM 2114 and FM 2311. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: Union Pacific, with 8 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Creek.
  • Public water: City of West, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Elm Creek in West?

Trinity Boring Solutions takes directional boring work in West, McLennan County, where the Census Bureau Vintage 2024 estimate puts the population at 2,597. Interstate 35 and Union Pacific track are key crossings to plan around. We install water, sewer, gas, electric conduit and fiber lines, routing them beneath West streets or across a roadway where the design and approvals allow.

Our main office is in Yukon, Oklahoma, and West work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. A West scope might instead be a water or fiber run near Davis Street or a crossing by Union Pacific track. We are a family business started 1965, with directional boring work dating to 1982.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show about Stephen soil in West?

The USDA soil survey maps Stephen soil across 29 percent of West, followed by Austin at 24 percent and Houston Black at 18 percent. At the surface, silty clay covers 61 percent of the mapped area and clay another 34 percent. About 40 inches down, bedrock is mapped in 56 percent of the area, while clay is mapped in 35 percent. Average clay content at that depth is 50 percent. These are mapped patterns, not test borings; sticky clay can ball on a reamer and grip pipe.

USDA soil survey, inside the West city limitsWhat is mapped
Soil series mappedStephen 29 percent, Austin 24 percent, Houston Black 18 percent, Heiden 12 percent and Lott 8 percent
Texture at the surfacesilty clay 61 percent, clay 34 percent and gravelly clay loam 3 percent
Texture about 40 inches downbedrock 56 percent, clay 35 percent and silty clay 8 percent
Engineering class about 40 inches downfat clay (CH) 35 percent and lean clay (CL) 8 percent
Average clay content about 40 inches down50 percent
Bedrock mapped within 60 inches69 percent of the area (0 percent hard rock, 69 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel96 percent of the area

The survey places bedrock within 60 inches across 69 percent of West and gives a typical depth of 26 inches, so a route may meet rock sooner than the surface suggests. The mapped unit is Austin Chalk, chalk from the Late Cretaceous; weathered chalk can slow drilling. We plan boring in West without mapped seasonal water table or flood prone soils, so those conditions are not defined by local mapping. High steel corrosion risk covers 96 percent of the mapped area, so the line owner should weigh casing and tracer wire materials; HDPE is not subject to that soil concern.

How do we bore West ground with bedrock near the surface?

In West, shallow mapped bedrock and clay call for a controlled bore, with the drill choice adjusted if the route reaches Austin Chalk. We plan the path around Reagan Street and the marked utilities before drilling.

  1. At a West route through heavy clay, we keep fluid pressure controlled to protect pavement, ream in stages and have the pipe ready before opening the hole.
  2. Where the USDA survey maps bedrock near the surface, we use a suitable bit for weathered Austin Chalk and slow the advance as the drill meets rock.
  3. Before a bore near Marable Street, we hydrovac each marked utility on the path; locate paint shows where a line runs, not its depth.
  4. As a bore advances toward Union Pacific track, we track the head from the surface and log depth and pitch so the route stays on line.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What could a bore cross along Reagan Street in West?

A bore in West may need to pass beneath Interstate 35, US 77, FM 2114 or FM 2311, each mapped inside the city limits. Interstate 35 and US 77 each have 1.2 roadway miles in the city; FM 2114 has 1.1 and FM 2311 has 0.2. Reagan Street is the longest named street at 2.44 miles, followed by Davis Street at 1.77 and Marable Street at 1.76. Where a route meets existing highway pavement, the crossing is bored or tunneled rather than open cut.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate1.2 roadway miles insideState highway office
US 77US highway1.2 roadway miles insideState highway office
FM 2114State highway1.1 roadway miles insideState highway office
FM 2311State highway0.2 roadway miles insideState highway office
Union PacificRailroad3.05 track miles insideThe railroad
Elm CreekStream0.04 channel miles insideChecked for Corps of Engineers jurisdiction
Rice CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Little Tehuacana CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 3.05 track miles in West, with 8 mapped street and rail crossings to consider in a route plan. Elm Creek runs 0.04 channel miles inside the city, but no street crossing of a named stream is mapped. Rice Creek runs along or touches the city boundary, and Little Tehuacana Creek is 0.9 miles outside it. No lakes or ponds are mapped within one mile, so creek and track locations deserve the closest crossing review.

Who approves a West bore near Union Pacific track?

TxDOT Waco District reviews utility permits for work in the right of way of Interstate 35, US 77, FM 2114 and FM 2311 in West. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. Highway pavement is bored or tunneled beneath, and the permit can set cover depth and other conditions. A Union Pacific crossing needs an agreement from the railroad owner. Elm Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning. Because West is incorporated, we treat its city streets as city controlled crossings and account for that ownership in our boring plans.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving West in McLennan County?

The City of West owns its public water system, which uses purchased surface water and lists 1,260 service connections serving 2,597 people. Electric service reported in McLennan County includes Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. Those reports do not identify the provider at every West address, so we confirm the line owner before planning a conduit bore. Hydrovac potholes help expose marked water and electric lines before drilling near them.

Line ownerWhat it isSourceSize
City of WestPublic water systemSurface water bought from another system1,260 connections, 2,597 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in McLennan CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put West’s median housing year at 1959; 51 percent of homes were built before 1960, 30 percent from 1960 to 1999 and 19 percent in 2000 or later. That mix can mean a project ties into older buried services or adds a new connection. Along streets such as Marable Street, we expose each marked utility on the bore path before the drill approaches it because paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is West in relation to Ross and Waco?

West is in McLennan County at an elevation of 650 feet and covers 1.71 square miles. ZIP code 76691 serves West, giving us the city identifier to use when organizing underground work and project records. Ross is 5.3 miles south, Abbott is 5.8 miles north and Leroy is 6.5 miles southeast. Lacy-Lakeview is the nearest larger city, 11.9 miles south, while Waco, the county seat, is 17.8 miles south. From our Yukon yard, the road distance is 282 miles and the drive is 5.4 hours, which affects mobilization for a West project.

Places near West

What bore work could come up near Davis Street in West?

  • Highway crossing: A bore beneath Interstate 35 or US 77 keeps a utility route below the roadway instead of cutting across its pavement.
  • Street service: A water or sewer connection near Davis Street can run below the street surface, with marked utilities exposed before drilling.
  • Fiber route: Electric conduit or fiber near Reagan Street needs a planned path around the street crossings and buried lines already marked there.
  • Rail crossing: A utility route below Union Pacific track needs the railroad’s crossing agreement and a bore plan that follows its conditions.
  • Creek crossing: A bore near Elm Creek can keep the channel uncut, with the proposed crossing checked for federal jurisdiction during planning.
  • Water connection: A new line near the City of West water system needs its route and tie in coordinated with the water line owner.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What details shape a quote near Interstate 35 in West?

For a quote on a bore near Interstate 35 in West, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the route meets Reagan Street, Union Pacific track or the mapped Elm Creek channel. That layout helps us assess access and crossings before setting the work scope.

West’s clay and shallow mapped Austin Chalk make soil conditions a leading price factor because they affect tooling, fluid and reaming. Route length and pipe size matter too, along with the number of utilities to expose, pavement or concrete, and any creek crossing at Elm Creek. Pits, excavator time and sand backfill also shape the work. A crossing at Interstate 35 or Union Pacific track adds planning, and the 282 road miles from Yukon affect mobilization.

Questions people ask about boring in West

Does Trinity Boring Solutions take directional boring work in McLennan County and West?

Yes. We take directional boring projects in West and across Texas. Our Yukon office coordinates the job, and our own crews or crews at vetted partner contractor yards can handle the work. You deal with Trinity from the first call through the bore log, whichever crew is on site, including for a route near Elm Creek.

What does a West bore beneath Union Pacific track need?

A West utility crossing beneath Union Pacific track needs an agreement with the railroad that owns it. We follow the agreement’s crossing conditions for casing, depth and flagging when planning a bore in West. The 3.05 track miles mapped inside West mean the route and crossing location should be identified early in planning.

Can a line be bored under Elm Creek in West?

A line can be planned to pass beneath Elm Creek in West, subject to the route and site conditions. The channel runs 0.04 miles inside the city, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. A bore can avoid cutting the creek bank, with pits set back on either side.

Who runs West’s public water system, and where does its water come from?

The City of West owns the public water system, and its source is purchased surface water. The system lists 1,260 service connections serving 2,597 people. For a proposed connection near Marable Street, the water line owner and marked utilities need to be located before the bore route is set.

Which electric company serves my West address in McLennan County?

The county electric service reports include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. Those reports do not say which one serves each West address. We confirm the line owner before planning a conduit bore and check the required conduit specifications with that owner.

Does the city or county control Marable Street in West, and must we cut it?

West is an incorporated city, so its city streets belong to the city, not the county. A route beneath Marable Street can be planned as a bore to leave the pavement uncut, subject to the project design and approvals. We locate and expose marked utilities on the path before drilling near them.

Can I reach Trinity after hours about an urgent bore near Marable Street in West?

Yes. A person answers Trinity’s phone at (405) 409-7423 around the clock for urgent work near Marable Street or elsewhere in West. We provide 24 hour emergency response; the route, ground conditions and any crossing such as Union Pacific track determine what response the job needs.

How far ahead should I call Texas811 for a bore near Reagan Street in West?

For a bore near Reagan Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. We allow at least two working days in West, matching the timing Texas811 describes for this requirement. If the start moves more than 14 days past the original notice, request a new ticket; have worn or moved marks refreshed through Texas811 before work continues.

What affects the price of directional boring near Interstate 35 in West?

The West job scope determines the price, especially the clay and shallow mapped bedrock that can change drilling time and tooling. Length, pipe size and the number of utilities to expose matter, as do pavement, an Elm Creek crossing, pits and equipment time. Interstate 35 or Union Pacific crossings add planning, and the 282 road miles from Yukon affect mobilization.

Where the West facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in West

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in West, Texas

Type the address of your job in West. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for West

Same county: Waco · Hewitt · Robinson · Bellmead · Woodway · McGregor · Beverly Hills · Mart · Lorena · Moody · Bruceville-Eddy · China Spring. All counties: Texas county list.