trinityboringsolutions.com

Adrian Texas Directional Boring: Pullman Clay Loam, Interstate 40, Hst US Route 66

Quick Answer: On Hst US Route 66, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility routes beneath pavement in Adrian, Texas. Adrian has 10.35 public road centerline miles, and the 304 road miles from our Yukon, Oklahoma main office shape mobilization for a bore along 5th Street. USDA maps Pullman clay loam across 76 percent of Adrian, where sticky clay can cling to a reamer or pipe. Interstate 40 runs along or touches the city limits, so its crossing needs a planned route.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Adrian bores at a glance

  • Incorporated city in Oldham County, Texas. Population 135 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 304 miles, about 5.6 hours of driving.
  • Ground: Pullman soil is mapped on 76 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 40 Business. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Adrian Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Hst US Route 66 in Adrian?

Trinity Boring Solutions takes directional boring work in Adrian, Oldham County, where the Census Bureau Vintage 2024 estimate puts the population at 135. Hst US Route 66 and 5th Street are the longest named streets; Adrian has 10.35 public road centerline miles, with Interstate 40 Business among its named routes. For routes along those streets, we install water, sewer, gas, electric conduit and fiber lines, with the bore path set to the project.

Our main office is in Yukon, Oklahoma, and Adrian work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. Beside that reach, a typical Adrian route such as a service connection off 5th Street is smaller in scope. In Oldham County, our family business began in 1965, and we have done directional boring since 1982, experience we bring to planning local work.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground should we expect in Adrian’s Pullman soil?

The USDA soil survey maps Pullman soil across 76 percent of Adrian and Olton soil across 24 percent. The mapped units are Pullman clay loam and Olton clay loam, both on 0 to 1 percent slopes. Clay loam covers the mapped surface and the soil about 40 inches below it; the survey reports an average clay content of 39 percent at that depth. Pullman and Olton soil patterns around Adrian guide our planning, but they are mapped soils rather than test borings for a planned bore. In practice, Adrian’s clay loam can stay around the reamer, so fluid and reaming need to suit sticky ground.

USDA soil survey, inside the Adrian city limitsWhat is mapped
Soil series mappedPullman 76 percent and Olton 24 percent
Texture at the surfaceclay loam 100 percent
Texture about 40 inches downclay loam 100 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The soil survey does not map bedrock within 60 inches, but that does not rule out rock deeper along a bore. It also shows no seasonal water table or flood prone soils in the mapped area, which reduces mapped concerns about wet pits or creek flooding. Every mapped area carries a high steel corrosion rating; the line owner should weigh that when selecting steel casing or tracer wire, while HDPE does not corrode from that soil condition. The Blackwater Draw Formation is Cenozoic sand, silt and locally clayey material; Cenozoic sedimentary rocks are also mapped as Paleocene.

How do we drill Adrian’s clay loam?

Adrian’s clay loam can hold an open hole yet stick to the reamer. We adjust the drilling fluid and ream in stages, using the Pullman and Olton mapping as planning context rather than a substitute for site checks.

  1. Because Adrian’s mapped clay loam is sticky, we use a thinner drilling fluid with polymer and open the hole in stages to limit clay buildup on the reamer.
  2. With about 39 percent average clay at 40 inches, we watch fluid returns near pavement and adjust pressure so drilling fluid does not lift the surface.
  3. Pullman clay loam can grip a pipe after reaming, so we plan to pull the line the same day the bore is opened.
  4. For a route along Grand Avenue, we track the drill head from the surface and record depth and pitch as it advances.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads or other features might a bore cross in Adrian near Hst US Route 66?

Interstate 40 Business is the highway mapped inside Adrian, while Interstate 40 runs along or touches the city limits and Texas State Highway 214 lies 0.1 miles outside them. Those routes can put a utility bore near highway right of way. Hst US Route 66 is the longest named street at 1.01 miles in the city, followed by 5th Street at 0.83 miles and Grand Avenue at 0.55 miles. A route under pavement can avoid cutting the street, but the alignment and right of way determine the review needed.

CrossingTypeMapped extentWho has a say
Interstate 40 BusinessInterstate1 roadway miles insideState highway office
Interstate 40Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 214Highway nearby0.1 miles outsideState highway office
Swipe the table sideways to see every column.

Adrian has no mapped railroad inside the limits or within one mile, so there is no local track crossing shown in the records. No streams or lakes are mapped in or within one mile of the city, and no mapped street crossings of named streams are listed. That means a mapped creek or rail crossing is not a local planning feature for a route near Hst US Route 66; the actual bore path still needs to be checked against its site conditions.

Whose permission does a bore in Adrian, Oldham County need?

For a bore beside Interstate 40 Business or the Interstate 40 city limit, TxDOT handles work in state highway right of way through its Amarillo District. Texas State Highway 214 is also a state route, so work in its right of way needs a TxDOT utility permit. The utility owner, not the drilling contractor, applies through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Adrian is incorporated, so its city streets, including Grand Avenue, belong to the city itself. No local railroad or stream crossing is mapped.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Adrian through the Adrian Municipal Water System?

The Adrian Municipal Water System is a local government system supplied by groundwater wells; public records list 96 service connections serving 129 people. Electric providers reporting service in Oldham County are Southwestern Public Service, Deaf Smith Electric Cooperative, Farmers Electric Cooperative and Rita Blanca Electric Cooperative. Those county listings do not identify the provider at each Adrian address, so we confirm the line owner before planning a conduit bore. Near the water system or an electric route, hydrovac potholing helps expose marked lines before drilling close to them.

Line ownerWhat it isSourceSize
Adrian Municipal Water SystemPublic water systemGroundwater wells96 connections, 129 people served
Southwestern Public Service, Deaf Smith Electric Cooperative, Farmers Electric Cooperative and Rita Blanca Electric CooperativeElectric utilities reporting service in Oldham CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Adrian’s median housing year at 1977; 36 percent of homes were built before 1960, 31 percent from 1960 to 1999 and 33 percent in 2000 or later. Housing age does not establish the age of a buried line, but it can help frame a replacement bore versus a new service. Before a route near 5th Street reaches a marked utility, we pothole to check its actual depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Adrian, Texas, including Hereford?

Adrian is an incorporated city in Oldham County, at an elevation of 4,041 feet and covering 0.47 square miles. For a bore along Hst US Route 66, ZIP code 79001 serves Adrian and helps us keep project records tied to the right area. Vega, the county seat, is 13.6 miles east; Wildorado is 26.2 miles east; Boys Ranch is 29.5 miles northeast; and Channing is 33.9 miles northeast. Hereford, the nearest larger city, is 34.7 miles southeast. From our Yukon, Oklahoma main office, Adrian is 304 road miles away and a 5.6 hour drive, which is part of planning a crew’s mobilization for work near Interstate 40 Business.

Places near Adrian

What would we bore near 5th Street in Adrian?

  • Water service: A connection from the Adrian Municipal Water System could be routed beneath pavement near 5th Street without cutting the street surface.
  • Highway crossing: A utility route near Interstate 40 Business needs a bore plan that accounts for the highway right of way.
  • Electric conduit: Near Hst US Route 66, we confirm the line owner and expose marked utilities before drilling close to the proposed path.
  • Fiber route: A conduit run along Grand Avenue can pass beneath pavement, with the bore route set around marked lines.
  • Service replacement: Near 6th Street, a replacement line can follow a planned bore path rather than an open cut across pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Interstate 40 Business in Adrian?

A map pin beside Interstate 40 Business matters because a small shift can put the proposed path in a different street or highway right of way. Send the Adrian address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans showing the intended route near Hst US Route 66 or 5th Street help us review access and crossings.

The 304 road miles from Yukon affect mobilization for an Adrian job. Pullman clay loam can affect drilling fluid and reaming, while a crossing at Interstate 40 Business or near Texas State Highway 214 adds route and permit details. Price also reflects pipe or conduit size, bore length, utilities to expose, pavement, pits, excavator time and sand backfill. Creek or drainage crossings, high profile or emergency work, and the access available on 5th Street can change the work plan.

Questions people ask about boring in Adrian

Does Trinity Boring Solutions take directional boring work in Adrian, Oldham County, and who staffs it?

Yes, we take directional boring work in Adrian, Oldham County. Our work uses our own crews and satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew is our own or a partner crew. A route on Hst US Route 66 can be discussed with us before the bore plan is set.

Who owns electric lines in Oldham County near Adrian, and who confirms conduit specs?

Oldham County electric service listings name Southwestern Public Service, Deaf Smith Electric Cooperative, Farmers Electric Cooperative and Rita Blanca Electric Cooperative. They do not show which provider serves each Adrian address. Confirm the line owner for the proposed route, such as a conduit run near Grand Avenue, and check the conduit requirements with that owner before planning the bore.

Does the city or county control Adrian’s Grand Avenue, and can a bore avoid cutting it?

Adrian is incorporated, so Grand Avenue and other city streets belong to the city itself, not the county. Directional boring can route a utility beneath pavement without an open cut across the street. The proposed path still needs to account for marked utilities and any applicable right of way, especially where a route approaches Interstate 40 Business.

Do Adrian’s older homes near 5th Street mean buried lines need replacement?

The American Community Survey 2019 to 2023 five year estimates put Adrian’s median housing year at 1977, with 36 percent of homes built before 1960. Those figures do not establish the age or condition of buried lines. For a replacement bore near 5th Street, we use the proposed route and pothole marked utilities to check their actual locations and depths.

Can Pullman soil corrode steel pipe on an Adrian bore, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across Adrian, including Pullman soil. The line owner should consider that rating when selecting steel casing or tracer wire. HDPE does not corrode from that soil condition. For a route near Hst US Route 66, the pipe choice still depends on the line owner’s design and the project requirements.

What ground does a bore pass through in Adrian’s Pullman soil?

The USDA soil survey maps Pullman soil across 76 percent of Adrian and Olton soil across 24 percent. Both are clay loam, including at about 40 inches below the surface, where average clay content is 39 percent. These are mapped patterns rather than test borings. Along 5th Street, the sticky clay can build on a reamer, so the drilling plan accounts for fluid and staged reaming.

What bore sizes and lengths can Trinity handle for a job near Adrian’s 6th Street?

For a crossing near Interstate 40 Business, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near 6th Street is sized to the route, what will be installed and the access available. A sketch or plans help us assess the proposed length and pipe or conduit dimensions.

How early should I call Texas811 for a bore along Hst US Route 66 in Adrian?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work along Hst US Route 66 slips more than 14 days past the original notice, make a new request. Near Grand Avenue, we have worn or moved marks refreshed through Texas811 before continuing underground work.

What affects the cost of directional boring near Interstate 40 Business in Adrian?

The job scope sets the price, with the 304 road miles from Yukon affecting mobilization to Adrian. Bore length, pipe or conduit size and Pullman clay loam all matter, as do pavement and the number of utilities that must be exposed. A route near Interstate 40 Business may also require highway right of way planning; pits, excavator time and emergency scheduling can affect the work.

Where the Adrian facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Adrian

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Adrian, Texas

Type the address of your job in Adrian. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Adrian

All counties: Texas county list.