Hereford Texas Directional Boring: Pullman Clay Loam, BNSF Railway and Tierra Blanca Creek
Quick Answer: What lies in the top five feet around Hereford? The USDA soil survey maps Pullman clay loam across 68 percent of the city, and bedrock is not mapped there. Directional boring, also called horizontal directional drilling (HDD), lets our crews plan for crossings near BNSF Railway tracks. Hereford is 302 road miles from our Yukon, Oklahoma main office, and US 60 is a local route a bore may need to cross. Pullman clay loam holds an open hole but can stick to the reamer, so we manage fluid and ream in stages.
Hereford bores at a glance
- County seat of Deaf Smith County, Texas. Population 14,860 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 302 miles, about 5.7 hours of driving.
- Ground: Pullman soil is mapped on 69 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 60, US 385, FM 1058, FM 1259 and FM 2856. State permit office: TxDOT Amarillo District.
- Railroad track inside the boundary: BNSF Railway, with 30 mapped street and rail crossings.
- Named streams inside the boundary: Tierra Blanca Creek.
- Public water: Hereford Municipal Water System, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring near BNSF Railway in Hereford?
We take directional boring work in Hereford, the Deaf Smith County seat, where the Census Bureau Vintage 2024 estimate puts the population at 14,860. Along streets such as Avenue K, our crews install water, sewer, gas, electric conduit and fiber lines by boring beneath pavement and other surface features. We also use horizontal directional drilling (HDD) where the route calls for it.
Our main office is in Yukon, Oklahoma, and Hereford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. That history and our range, from 3/4 inch service lines to 48 inch casing, suit work from a 1st Street service to a larger crossing near BNSF Railway.

What does the soil survey show about Pullman soil in Hereford?
The USDA soil survey maps Pullman soil across 69 percent of Hereford, with Pullman clay loam, 0 to 1 percent slopes, covering 68 percent. Surface texture is clay loam across 91 percent of the mapped city area. At about 40 inches below the surface, the survey maps clay loam across 95 percent and an average clay content of 37 percent. For Hereford bore planning, we treat mapped soil patterns as regional guidance, not test borings at the proposed route. The clay rich ground can hold an open bore, but it can also cling to the reamer and grip pipe.
| USDA soil survey, inside the Hereford city limits | What is mapped |
|---|---|
| Soil series mapped | Pullman 69 percent, Pep 9 percent, Estacado 8 percent, Berda 8 percent and Bippus 4 percent |
| Texture at the surface | clay loam 91 percent and loam 9 percent |
| Texture about 40 inches down | clay loam 95 percent and sandy clay loam 4 percent |
| Engineering class about 40 inches down | lean clay (CL) 99 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 87 percent of the area |
Bedrock is not mapped in the top five feet of Hereford, and the mapped area with a seasonal water table within 40 inches is 1 percent. Flood prone soils cover 4 percent, so a route near Tierra Blanca Creek deserves attention to channel depth and possible Corps jurisdiction. High steel corrosion risk is mapped across 87 percent, which matters for uncoated casing and tracer wire; the line owner selects coatings, while HDPE avoids that steel corrosion concern. The geologic map shows the Cenozoic Blackwater Draw Formation, made up of sand, fine alluvium and silt, with thickness as much as 25 feet.
How do we bore Hereford’s clay loam?
Pullman clay loam dominates the mapped ground in Hereford. We choose the drilling fluid and reaming sequence to keep the hole workable without forcing excess pressure beneath streets such as Avenue K.
- Pullman clay loam can cling to the reamer, so we use a thinner fluid mix with polymer and open the hole in stages before pulling pipe.
- Where Hereford’s mapped heavy clay is present, we watch fluid returns and keep pressure controlled to avoid lifting pavement along streets such as Avenue K.
- A creek route at Tierra Blanca Creek needs depth planning below the channel; we track the drill head from the surface and log depth and pitch.
- Before drilling near any marked line on a proposed 1st Street route, we expose it with hydrovac potholing because surface marks do not show depth.

Which roads, tracks or creeks could a Hereford bore cross near Avenue K?
US 60 and US 385 run through Hereford, along with FM 1058, FM 1259 and FM 2856. A route beneath one of these highways calls for highway right of way planning, not an open cut through existing pavement. Avenue K is the city’s longest named street at 3.75 miles, followed by 1st Street at 2.78 miles and Park Avenue at 2.71 miles. Their length makes them useful route references, but each proposed crossing still depends on the actual line path and marked utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 60 | US highway | 3.7 roadway miles inside | State highway office |
| US 385 | US highway | 2.8 roadway miles inside | State highway office |
| FM 1058 | State highway | 1.5 roadway miles inside | State highway office |
| FM 1259 | State highway | 0.7 roadway miles inside | State highway office |
| FM 2856 | State highway | 0.6 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 11 track miles inside | The railroad |
| Tierra Blanca Creek | Stream | 3.36 channel miles inside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 11.0 track miles in Hereford, and public mapping shows 30 street and rail crossings in the city. A crossing of BNSF Railway needs an agreement with the railroad that owns the track, with the agreement setting casing, depth and flagging. Tierra Blanca Creek runs 3.36 channel miles through the city, and six mapped streets cross named streams. Hereford’s mapped area shows no lakes or ponds within one mile, but we still confirm the specific bore path before planning. A creek route needs channel depth planning and a check for Corps jurisdiction.
Who approves a bore on Hereford roads in Deaf Smith County?
Hereford is incorporated, so its city streets belong to the city itself; we do not assume a highway permit covers a city street such as Park Avenue. For US 60, US 385 or a farm to market road, the line owner, not the drilling contractor, applies for a TxDOT utility permit through RULIS. TxDOT’s Amarillo District reviews it, and we give the utility owner the bore plan and profile and work under its permit. TxDOT cover rules set 60 inches for electric and communication lines crossing a highway, 48 inches along its right of way, and 60 inches for water crossings. The permit can require another depth. A BNSF Railway crossing needs the railroad’s agreement, and a Tierra Blanca Creek route is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground near Hereford Municipal Water System?
The Hereford Municipal Water System serves 16,048 people through 6,577 service connections and draws from groundwater wells. That existing network can affect a proposed service route along Avenue K or 1st Street. Southwestern Public Service, Deaf Smith Electric Cooperative and Farmers Electric Cooperative report electric service in Deaf Smith County. We confirm the electric line owner for the specific address before planning a conduit bore; those county reports do not establish which provider serves every Hereford property.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Hereford Municipal Water System | Public water system | Groundwater wells | 6,577 connections, 16,048 people served |
| Southwestern Public Service, Deaf Smith Electric Cooperative and Farmers Electric Cooperative | Electric utilities reporting service in Deaf Smith County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimates carefully: Hereford’s median housing year is 1969, not a measure of underground conditions. The estimates show 28 percent of units built before 1960 and 11 percent built in 2000 or later, so a replacement bore near 1st Street may face older buried lines while newer services can call for a different route. Before the drill gets near a marked utility, we expose it by hydrovac potholing; paint shows position, not depth.

Where does Trinity take directional boring work near Hereford and Summerfield?
Hereford is in Deaf Smith County, covers 6.32 square miles and sits at an elevation of 3,819 feet. We use ZIP code 79045 to identify the Hereford service location when organizing a directional boring quote. Summerfield is 8.4 miles southwest, Umbarger is 18.9 miles northeast, and Dimmitt is 19.7 miles south. Hereford is the county seat, and Amarillo, the nearest larger city listed, is 41.3 miles northeast. From our Yukon, Oklahoma main office, the road distance is 302 miles and the drive is 5.7 hours. That distance is part of planning a bore near US 60, especially when the job also needs equipment or excavator time.
Places near Hereford
- Directional boring in Summerfield: 8.4 miles southwest
- Directional boring in Umbarger: 18.9 miles northeast
- Directional boring in Dimmitt: 19.7 miles south
- Directional boring in Friona: 22.3 miles southwest
- Directional boring in Nazareth: 25.7 miles southeast
- Directional boring in Amarillo: 41.3 miles northeast
Which jobs call for a bore near Park Avenue in Hereford?
- Highway crossing: A bore under US 60 or US 385 avoids cutting existing pavement, with the route and cover addressed in the TxDOT permit.
- Water service: A new connection near Hereford Municipal Water System lines needs a route that accounts for existing groundwater well supply piping.
- Fiber conduit: A proposed Avenue K fiber route can pass beneath pavement, with marked utilities exposed before the drill approaches them.
- Creek crossing: A Tierra Blanca Creek bore needs a plan for channel depth and a check for Corps jurisdiction during planning.
- Rail crossing: A route under BNSF Railway requires the railroad’s crossing agreement to set casing, depth and flagging.
- Replacement service: A bore near 1st Street can replace aging buried lines without opening a trench across the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Hereford bore near Tierra Blanca Creek?
For a Hereford quote, send us the address or map pin, planned installation, pipe or conduit size, footage, and any sketch or plans. A route near Tierra Blanca Creek is worth showing clearly because the channel crossing and access affect the work plan.
Pullman clay loam is the first ground factor to assess because sticky clay can build on a reamer and grip the pipe. The price also reflects bore length, pipe or conduit size, marked utilities to expose, and pavement or concrete along Avenue K or US 60. A BNSF Railway or Tierra Blanca Creek crossing adds its own planning needs. Pits, excavator time, sand backfill, emergency scope and mobilization from Yukon matter too, with Hereford 302 road miles from our main office.
Questions people ask about boring in Hereford
Does Trinity take directional boring jobs in Deaf Smith County near Hereford?
Yes. We take work in Deaf Smith County, and Hereford jobs can be staffed by our crews or by partner drilling contractors we have vetted. You work with Trinity from the initial call through the bore log, even when a partner crew is on site. The route and job scope determine which crew handles the drilling.
How do Hereford’s older buried lines near 1st Street affect a replacement bore?
Hereford’s median housing year is 1969 in the American Community Survey 2019 to 2023 estimates, and 28 percent of housing units were built before 1960. Older properties near 1st Street may have buried lines that need careful locating before replacement work. We expose marked utilities before the drill approaches them.
Does Pullman soil in Hereford corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 87 percent of Hereford. That can matter for uncoated steel casing or tracer wire. HDPE is not subject to the same soil corrosion concern, but the line owner chooses coatings for steel components and confirms the material for the job.
What ground does a bore pass through in Hereford’s Pullman soil?
Pullman soil covers 69 percent of Hereford in the USDA soil survey. At about 40 inches down, clay loam is mapped across 95 percent of the city, with an average clay content of 37 percent. This mapped pattern suggests sticky ground that can hold a bore open but may load the reamer.
Could a directional bore in Hereford encounter rock beneath US 60, and what site information would help us assess the crossing?
Bedrock is not mapped in Hereford’s top five feet, but that does not rule out rock at greater depth. The geologic map identifies the Cenozoic Blackwater Draw Formation, including sand, fine alluvium and silt. A project near Tierra Blanca Creek still needs a site specific route and depth plan.
Who approves a bore beneath US 60 in Hereford?
For work in US 60 right of way, the utility owner applies for the TxDOT permit through RULIS, and TxDOT’s Amarillo District reviews it. We provide the bore plan and profile to the line owner and work under its permit. A city street such as Avenue K follows a separate city street route.
How early should I call Texas811 for a bore along Avenue K in Hereford?
Plan the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. We schedule Hereford work around Texas811’s description of that notice period as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.
Does Hereford’s distance from Amarillo change a job mobilized from Yukon?
From our Yukon, Oklahoma main office, we plan for Hereford as 302 road miles away and a 5.7 hour drive. Amarillo is 41.3 miles northeast of Hereford, but the job is planned around its actual location, access and equipment needs. The distance from Yukon can affect mobilization for a bore near US 385 or another local route.
What affects the cost of a directional bore beneath US 60 in Hereford, including the crossing route and the footage we need to install?
The job scope sets the price, with Pullman clay loam, bore length, pipe size and the utilities to expose among the main factors. A US 60 crossing adds highway planning, while Tierra Blanca Creek or BNSF Railway can bring added crossing requirements. Pavement, pits, excavator time and mobilization from Yukon also affect the work.
Where the Hereford facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hereford
- U.S. Census Bureau, TIGER/Line 2024: Hereford boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Hereford
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hereford housing units and year built
- Macrostrat geologic map compilation: map units under Hereford
- U.S. EPA Safe Drinking Water Information System: public water systems serving Hereford
- U.S. Department of Transportation, North American Rail Network: track owners in Deaf Smith County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Deaf Smith County
- U.S. Geological Survey, Elevation Point Query Service: Hereford elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hereford
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hereford
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hereford, Texas
Type the address of your job in Hereford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hereford
All counties: Texas county list.
