trinityboringsolutions.com

Falcon Mesa Texas Directional Boring: Copita Fine Sandy Loam, FM 3074, Laredo Formation

Quick Answer: FM 3074 and FM 496 are the main mapped highway routes, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Falcon Mesa, Texas. Falcon Mesa is 686 road miles from our Yukon, Oklahoma main office, so a Pump Road project needs mobilization planned with the route. Copita fine sandy loam covers 44 percent of the mapped community, while bedrock within 60 inches is mapped across 56 percent. That ground can change the bit choice and how carefully we steer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Falcon Mesa bores at a glance

  • Unincorporated community in Zapata County, Texas. Population 523 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 686 miles, about 13.3 hours of driving.
  • Ground: Copita soil is mapped on 44 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 56 percent of the area.
  • Highways inside the boundary: FM 3074 and FM 496. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along Pump Road in Falcon Mesa?

We take directional boring work in Falcon Mesa, an unincorporated community in Zapata County with a population of 523 in the 2020 Census count. Along a route such as Pump Road, our crews can install water, sewer, gas, electric conduit or fiber, with the line type and size matched to the plans. We serve work across Texas, including Falcon Mesa.

Our main office is in Yukon, Oklahoma, and Falcon Mesa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service line near Hawk Street or a longer casing bore, our range runs from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982; the same company history follows a Falcon Mesa job from planning through its bore log.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect when drilling Falcon Mesa Copita soil?

The USDA soil survey maps Copita fine sandy loam across 44 percent of Falcon Mesa, so a bore near that soil may start in a loose, workable surface layer. At about 40 inches, bedrock is mapped across 54 percent of the area, while sandy clay loam is mapped under 9 percent and silt loam under 4 percent. Average clay content at that depth is 21 percent. These are survey estimates of mapped ground, not readings from a test boring on Pump Road.

USDA soil survey, inside the Falcon Mesa mapped community boundaryWhat is mapped
Soil series mappedCopita 44 percent, Nido 10 percent, Tela 6 percent, Lagloria 4 percent and Verick 3 percent
Texture at the surfacefine sandy loam 59 percent, sandy clay loam 6 percent and loam 4 percent
Texture about 40 inches downbedrock 54 percent, sandy clay loam 9 percent and silt loam 4 percent
Engineering class about 40 inches downclayey sand (SC) 9 percent and silty clay (CL ML) 4 percent
Average clay content about 40 inches down21 percent
Bedrock mapped within 60 inches56 percent of the area (0 percent hard rock, 56 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel48 percent of the area

Bedrock is mapped within 60 inches across 56 percent of Falcon Mesa, and the mapped bedrock is weathered; hard bedrock is not mapped at that depth. No seasonal water table is mapped within 60 inches, while flood prone soils cover 6 percent. High steel corrosion risk is mapped across 48 percent, so the line owner should consider material protection for steel. The underlying Laredo Formation of the Claiborne Group is Eocene sandstone and clay, a reason to check conditions as a bore moves from soil toward rock.

How do we run a bore through Falcon Mesa bedrock?

For Falcon Mesa, we use the mapped mix of Copita soil and shallow weathered bedrock to guide the bore plan, then track the drill head as it advances near local streets such as Seagull Street.

  1. We use the Copita fine sandy loam map as a starting point, but check actual conditions along the Pump Road bore because the survey is not a jobsite test.
  2. Where bedrock is mapped near 40 inches, we allow for slower drilling through weathered rock and watch the soil to rock contact for steering changes.
  3. Before drilling near marked lines on Seagull Street, we hydrovac pothole them to expose their depth; paint alone shows position, not depth.
  4. We track the drill head from the surface and log depth and pitch, keeping pits in dirt beside streets such as Hawk Street rather than cutting pavement.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What could a bore have to cross in Falcon Mesa near FM 3074?

FM 3074 has 3.4 mapped roadway miles inside the Falcon Mesa community boundary, and FM 496 has 1.3. US 83 runs 0.8 miles outside that boundary. Existing highway pavement on these routes calls for a bore or tunnel rather than an open trench. Pump Road is the longest named local street at 0.59 miles, followed by Pelican Street and Seagull Street at 0.56 miles each. A route along those streets still needs its utilities located and exposed before drilling.

CrossingTypeMapped extentWho has a say
FM 3074State highway3.4 roadway miles insideState highway office
FM 496State highway1.3 roadway miles insideState highway office
US 83Highway nearby0.8 miles outsideState highway office
International Falcon ReservoirLake or pond36,021 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Falcon Mesa or within one mile outside it, so the mapped community has no street and rail crossings. No named stream is mapped inside or within one mile, and no street crossing of a named stream is mapped. International Falcon Reservoir, a 36,021 acre lake, lies within the community boundary. If a planned bore crosses the reservoir, we check for U.S. Army Corps of Engineers jurisdiction during planning; the 0.57 miles of unnamed drainage also deserves attention in route design.

Whose permission does a Falcon Mesa bore in Zapata County need?

Falcon Mesa is an unincorporated community, so there is no city government to permit its streets; county or state authority depends on the route. For work in the right of way of FM 3074, FM 496 or US 83, the utility owner, not our drilling crew, files the TxDOT application through RULIS. The TxDOT Pharr District reviews it, and we prepare the bore plan and profile for the owner. TxDOT cover rules set highway crossing depths at 60 inches for electric and communication lines, water lines and pressurized sewer lines; the permit may require another depth. Existing highway pavement is bored or tunneled, with rural highway crossings extending beneath all travel lanes.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What buried lines and providers should we check in Falcon Mesa, Zapata County?

The water provider for a specific Falcon Mesa address must be confirmed with the county or local water district before a bore is planned; available EPA drinking water records do not match a system to this community. For electric service in Zapata County, AEP Texas Central and Medina Electric Cooperative report service, but neither should be assumed to serve every address. We confirm the electric line owner before planning conduit along a route such as Hawk Street.

Line ownerWhat it isSourceSize
AEP Texas Central and Medina Electric CooperativeElectric utilities reporting service in Zapata CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Falcon Mesa’s median housing year at 1992; 1 percent of homes were built before 1960, 80 percent from 1960 to 1999 and 19 percent in 2000 or later. That mix can mean either replacement work or new service connections along Pump Road. Our rule is to hydrovac expose each marked utility on the bore path before drilling near it. For a line under Seagull Street, we pothole the marked crossings because surface marks do not show depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Falcon Mesa and nearby Siesta Shores?

Falcon Mesa is in Zapata County, covers 1.52 square miles and sits at an elevation of 327 feet. Its ZIP code is 78076. Siesta Shores is 2.6 miles southeast, Falcon Lake Estates is 2.1 miles east, and Zapata is 2.9 miles northeast. Zapata is both the county seat and the nearest larger city. From our Yukon, Oklahoma main office, the drive is 686 road miles and 13.3 hours, so that distance is part of planning a Pump Road mobilization.

Places near Falcon Mesa

Which jobs call for a bore in Falcon Mesa along Pump Road?

  • Highway crossing: A bore beneath FM 3074 follows TxDOT planning and cover requirements, with the route extending beneath all rural highway travel lanes.
  • Street utility: Water or sewer work along Pump Road needs a route matched to the pipe size and marked utilities in the street corridor.
  • Electric conduit: For conduit near Hawk Street, we confirm the line owner and check marked utilities before setting the bore path.
  • Fiber route: A fiber bore along Seagull Street can use a narrow service line route while avoiding open cuts across pavement and driveways.
  • Reservoir approach: A planned line near International Falcon Reservoir needs a crossing review for possible U.S. Army Corps of Engineers jurisdiction.
  • Service connection: A short connection near Pelican Street may suit a small service line, with access and existing lines checked before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Falcon Mesa bore quote near Hawk Street?

For a Hawk Street quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us map the route. Those details show whether the job stays on a local street or reaches FM 3074, and help us plan access for the bore.

A short, direct route through Copita fine sandy loam is simpler to plan than one that meets the mapped shallow bedrock or a highway right of way. We also weigh bore length, pipe size, utilities to expose, pavement, drainage crossings, pits, backfill and excavator time. A crossing at FM 3074 can add permit and cover planning, while the 686 road miles from Yukon affect mobilization. High profile or emergency work can also change the crew and schedule needed.

Questions people ask about boring in Falcon Mesa

Does Trinity Boring Solutions take directional boring jobs in Falcon Mesa, Zapata County?

Yes, we take directional boring work in Falcon Mesa, Zapata County. The work is done by our own crews or from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a Pump Road route.

Can Copita soil in Falcon Mesa corrode a steel pipe, and what pipe should we use?

The USDA soil survey maps high steel corrosion risk across 48 percent of Falcon Mesa, including areas mapped as Copita soil. The line owner should account for that risk when choosing steel casing or tracer wire protection. HDPE does not have the same soil corrosion concern, but the line owner selects materials for the job.

What ground is likely about 40 inches down in Falcon Mesa Copita soil?

The USDA soil survey maps bedrock across 54 percent of Falcon Mesa at about 40 inches, with sandy clay loam under 9 percent and silt loam under 4 percent. Copita fine sandy loam is the leading mapped soil series. These map patterns guide planning, but they are not a test of the ground at a particular address.

Will a Falcon Mesa bore hit rock, and how much is mapped in the top five feet?

Rock is a planning possibility: bedrock is mapped within 60 inches across 56 percent of Falcon Mesa. The mapped bedrock is weathered, and hard bedrock is not mapped within that depth. A bore near Pump Road still needs its route and actual ground conditions checked because the map does not establish conditions at a specific point.

Who approves a Falcon Mesa bore beneath FM 3074, and which TxDOT office reviews it?

The utility owner files the right of way application in TxDOT’s RULIS system for a bore beneath FM 3074; the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the owner’s filing. TxDOT rules require boring or tunneling beneath existing highway pavement, with the crossing depth set by the applicable line type and permit.

Who owns electric lines in Falcon Mesa, Zapata County, and who confirms conduit details?

AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County, but that does not identify the provider at every Falcon Mesa address. We confirm the line owner for the specific route before planning an electric conduit bore, including one along Hawk Street. The owner can confirm the conduit specifications for its line.

Can I reach Trinity after hours about an urgent Falcon Mesa bore near Seagull Street?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent job near Seagull Street, share the location and what line needs work so we can understand the request. We also provide 24 hour emergency response for work in Falcon Mesa.

How far ahead should I call Texas811 for a Falcon Mesa bore along Pump Road?

The excavator or project team should request a Texas811 locate for the Pump Road bore at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring in Falcon Mesa near FM 3074?

The route and scope determine the price. Length, pipe or conduit size, Copita soil and mapped bedrock, utilities to expose, pavement, drainage crossings, pits and backfill all affect the work. A bore under FM 3074 adds highway planning, and the 686 road miles from Yukon affect mobilization. High profile or emergency work can also change what the job requires.

Where the Falcon Mesa facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Falcon Mesa

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Falcon Mesa, Texas

Type the address of your job in Falcon Mesa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Falcon Mesa

Same county: San Ygnacio · New Falcon · Lopeño · Morales-Sanchez · Ramireno · Los Lobos. All counties: Texas county list.