trinityboringsolutions.com

Medina Texas Directional Boring: Hebbronville Soil, Arroyo Indigo, Highway 16

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Medina for crossings such as Texas State Highway 16. The 688 road miles from our Yukon yard make mobilization part of planning for a bore near Guerrero Avenue. Hebbronville loamy fine sand is common here, and loose sand can cave behind the drill head. Arroyo Indigo crossings also call for a route planned around the channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Medina bores at a glance

  • Unincorporated community in Zapata County, Texas. Population 3,953 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 688 miles, about 13.9 hours of driving.
  • Ground: Hebbronville soil is mapped on 46 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 33 percent of the area.
  • Highways inside the boundary: Texas State Highway 16. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Arroyo Indigo and Arroyo Costa Rica.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Texas State Highway 16 in Medina?

Trinity Boring Solutions handles directional boring in Medina, Zapata County, including routes along Texas State Highway 16. The 688 road miles from our Yukon yard shape mobilization for work near Guerrero Avenue. The Census Bureau counted 3,953 residents in 2020. We install water, sewer, gas, electric conduit and fiber along Medina streets and highway routes, with the route and line owner confirmed for each job.

Our main office is in Yukon, Oklahoma, and Medina work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have bored since 1982. Four decades of directional boring help us plan for Medina ground such as Hebbronville loamy fine sand, where an open hole can cave before pipe is pulled.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Medina and Hebbronville soil?

The USDA soil survey maps Hebbronville soil across 46% of Medina and Copita across 31%, with Tela covering 13%. Surface textures are 49% loamy fine sand, 38% fine sandy loam and 13% sandy clay loam. About 40 inches down, fine sandy loam is mapped across 49% of the area, while sandy ground is mapped across 54%. Average clay content at that depth is 17%. These are mapped patterns, not test borings, so the actual route still needs field review. The sandy share can make the bore easy to cut but harder to keep open.

USDA soil survey, inside the Medina mapped community boundaryWhat is mapped
Soil series mappedHebbronville 46 percent, Copita 31 percent, Tela 13 percent, Brennan 5 percent and Comitas 3 percent
Texture at the surfaceloamy fine sand 49 percent, fine sandy loam 38 percent and sandy clay loam 13 percent
Texture about 40 inches downfine sandy loam 49 percent, bedrock 31 percent and sandy clay loam 18 percent
Engineering class about 40 inches downsilty clayey sand (SC SM) 49 percent and clayey sand (SC) 18 percent
Average clay content about 40 inches down17 percent
Bedrock mapped within 60 inches33 percent of the area (0 percent hard rock, 33 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils13 percent of the area
High corrosion risk for uncoated steel31 percent of the area

The USDA soil survey maps bedrock within 60 inches across 33% of Medina, all described as weathered bedrock; hard bedrock is not mapped in that depth. The typical depth is 36 inches, so a route may slow where the drill meets rock. No seasonal water table is mapped within 60 inches, while flood prone soils cover 13%, including Tela soils that may flood. High steel corrosion risk is mapped across 31%, a concern to discuss for steel casing and tracer wire. The Eocene Laredo Formation of the Claiborne Group is mapped as sandstone and clay, so ground conditions can change along a bore.

What does it take to bore Medina fine sandy loam?

Medina fine sandy loam and loamy fine sand call for a bore plan that keeps the hole supported as it is opened. We track the drill head from the surface and log its depth and pitch along the route.

  1. In Hebbronville loamy fine sand, we use drilling fluid to support the bore wall, then ream in stages so loose ground is less likely to cave behind the bit.
  2. Where the USDA map shows weathered bedrock near 36 inches, we plan for slower drilling and check the drill head as the ground changes from soil to rock.
  3. For a route near the 13% of Medina mapped as flood prone, we plan the crossing depth beneath the channel and check Arroyo Indigo for federal jurisdiction.
  4. We expose marked utilities before the drill approaches them, then track depth and pitch from the surface along a route such as Texas State Highway 16.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

Which roads, tracks or creeks affect a Medina bore near Guerrero Avenue?

Texas State Highway 16 runs for 1.3 mapped roadway miles inside the Medina community boundary, and US 83 is 0.5 miles outside it. Guerrero Avenue, 13th Avenue and Ramireno Avenue are each mapped for 1.29 miles inside the community. A bore can pass beneath pavement rather than cut across it, subject to the route and any required approvals. These named roads help define access and crossing points, but the proposed alignment determines which utilities and surfaces need to be handled.

CrossingTypeMapped extentWho has a say
Texas State Highway 16State highway1.3 roadway miles insideState highway office
US 83Highway nearby0.5 miles outsideState highway office
Arroyo IndigoStream1.61 channel miles insideChecked for Corps of Engineers jurisdiction
Arroyo Costa RicaStream0.76 channel miles insideChecked for Corps of Engineers jurisdiction
Arroyo ValerianoStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo TorcidoStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo San BartoloStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Medina community boundary or within one mile outside it, and no street and rail crossings are mapped. Arroyo Indigo runs for 1.61 channel miles inside the community, and Arroyo Costa Rica for 0.76 miles. The map records 19 street crossings of named streams. No lakes or ponds are mapped within one mile. An Arroyo Indigo crossing needs a channel specific plan, not a standard street bore.

Who has to sign off on a Medina bore in Zapata County?

Medina is an unincorporated community in Zapata County, so it has no city government; street authority depends on whether the route is on a county road or state right of way. For work in the right of way of Texas State Highway 16 or US 83, the line owner, not the driller, files through TxDOT’s online RULIS system. We prepare the bore plan and profile for that filing, and the TxDOT Pharr District reviews it. TxDOT rules call for boring or tunneling beneath an existing highway, with casing and a bore beneath all travel lanes on rural highways. Required cover varies by line type, and the district may set another depth in the permit. A route beneath Arroyo Indigo is checked for U.S. Army Corps of Engineers jurisdiction. Any railroad crossing requires an agreement with the railroad that owns the track.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should we check before a Medina bore in Zapata County?

The water provider for a specific Medina address has to be confirmed with the city, the county or the local water district before a bore is planned. Utilities reporting electric service in Zapata County include AEP Texas Central and Medina Electric Cooperative; the line owner for a particular location must be confirmed before an electric conduit bore. That check matters along streets such as Guerrero Avenue, where the address and route determine which buried lines need to be located.

Line ownerWhat it isSourceSize
AEP Texas Central and Medina Electric CooperativeElectric utilities reporting service in Zapata CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Medina’s median housing year at 1991; 7% of homes were built before 1960, 66% from 1960 to 1999 and 27% in 2000 or later. That mix can mean either replacement work or a new service, so age alone does not identify buried lines. For a proposed line under Guerrero Avenue, we hydrovac pothole each marked utility on the bore path before drilling near it. Paint marks position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Medina from Roma and our Yukon yard?

Medina is in Zapata County at an elevation of 453 feet and covers 1.77 square miles within its mapped community boundary. Its ZIP code is 78076. Las Palmas is 1.3 miles northwest, and Zapata, the county seat, is 2.3 miles south. Roma, the nearest larger city, is 39.4 miles southeast. Medina is 688 road miles and a 13.9 hour drive from our Yukon, Oklahoma yard, so distance is part of planning mobilization for work around Texas State Highway 16.

Places near Medina

What would we bore near Ramireno Avenue in Medina?

  • Highway crossing: A route beneath Texas State Highway 16 can bore under pavement, with the alignment planned for its travel lanes and right of way.
  • Street service: A water or sewer service near Ramireno Avenue can run underground without cutting the street surface, subject to the route and utility locations.
  • Creek crossing: A bore beneath Arroyo Indigo can be planned around the channel, with jurisdiction checked during project planning.
  • Fiber conduit: A fiber route along Guerrero Avenue can use directional boring to avoid opening the paved street where the alignment allows.
  • Electric conduit: A proposed conduit near Zapata Boulevard needs the specific line owner identified before its route is set.
  • Rural service: A line serving a site toward Las Palmas can be scoped for the longer route and access shown on the project plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Medina quote near Zapata Boulevard?

For a Medina quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Zapata Boulevard gives us a local reference, but the actual alignment and crossings determine the work. Include any known pavement, drainage or access limits so we can review the proposed bore.

The scope sets the price, with Medina’s sandy soils affecting how we keep the bore open and whether staged reaming is needed. Crossing count and exposure work matter where a route meets streets such as Zapata Boulevard or the channels of Arroyo Indigo. Pavement, pits, excavator time and sand backfill can change the plan. Pipe size, length and emergency timing also matter, as does mobilization across the 688 road miles from Yukon.

Questions people ask about boring in Medina

Does Trinity Boring Solutions take Medina directional boring work in Zapata County, and how is it staffed?

Yes, we take directional boring work in Medina, Zapata County. Our own crews and partner drilling contractors from vetted satellite yards staff the work, while customers coordinate with Trinity from the first call through the bore log. The 688 road miles from Yukon are considered when planning mobilization for a route near Texas State Highway 16.

Is rock mapped near Medina, and how much bedrock is within five feet?

The USDA soil survey maps bedrock within five feet across 33% of Medina, and that mapped bedrock is weathered rather than hard. Typical bedrock depth is 36 inches, so a bore may slow where it reaches rock. The Laredo Formation of the Claiborne Group is mapped as sandstone and clay, but the survey is not a test of a particular route.

Who approves a bore under Texas State Highway 16 in Medina?

For work in the Texas State Highway 16 right of way, the line owner submits the utility permit application through TxDOT’s RULIS system, and the TxDOT Pharr District reviews it. We provide the bore plan and profile for the owner’s filing. The permit determines the required cover for the line and the approved crossing plan.

Can a line be bored under Arroyo Indigo in Medina?

A line can be planned beneath Arroyo Indigo, but the route and channel conditions need review before the bore is designed. The stream runs for 1.61 channel miles inside Medina, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. The mapped street crossings of streams also make the proposed alignment important.

Which electric company owns the lines at a Medina address in Zapata County?

AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County, but that does not establish which company owns lines at a specific Medina address. Confirm the line owner before conduit plans are set. For a route near Zapata Boulevard, the owner can confirm the applicable conduit requirements for that location.

Who controls the streets in Medina, and does a bore under Ramireno Avenue require a street cut?

Medina is an unincorporated community with no city government, so street authority rests with the county or state depending on the road. A bore under Ramireno Avenue can avoid cutting the street surface when the route and approvals allow. Texas State Highway 16 is a state highway, so its right of way follows TxDOT’s utility permit process.

Does Trinity serve Las Palmas and rural sites outside Medina?

Yes, we take work around Medina, including nearby Las Palmas and rural sites outside the mapped community boundary. Las Palmas is 1.3 miles northwest of Medina, and the route, access and footage help define the work. Mobilization is planned from our Yukon yard, rather than from a local Medina office.

How much notice does Texas811 need before a bore near Guerrero Avenue in Medina, and what if marks move?

For a bore near Guerrero Avenue, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. Texas811 describes the notice as at least two working days. If the start slips more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed before work continues.

What affects the cost of directional boring under Texas State Highway 16 in Medina?

The route and scope determine the cost of a Texas State Highway 16 bore in Medina. Length, pipe or conduit size, soil and rock, utility crossings, pavement, creek work, pits and excavator time can all affect the plan. Mobilization from Yukon also matters at 688 road miles, and emergency timing or sand backfill can change the work.

Where the Medina facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Medina

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Medina, Texas

Type the address of your job in Medina. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Medina

Same county: San Ygnacio · New Falcon · Lopeño · Morales-Sanchez · Ramireno · Los Lobos. All counties: Texas county list.