trinityboringsolutions.com

New Falcon Texas Directional Boring: Copita Fine Sandy Loam, Arroyo Tinajas and US 83

Quick Answer: EPA records do not tie a water provider to New Falcon, and AEP Texas Central and Medina Electric Cooperative report service in Zapata County, so we confirm line ownership before a US 83 bore. Trinity handles directional boring, also called horizontal directional drilling (HDD), beneath US 83 and along Jaime J Zapata Street. New Falcon is 706 road miles from our Yukon office, with Arroyo Tinajas affecting route checks. Copita fine sandy loam covers 39 percent of mapped ground, while shallow bedrock can change the tooling.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

New Falcon bores at a glance

  • Unincorporated community in Zapata County, Texas. Population 117 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 706 miles, about 13.7 hours of driving.
  • Ground: Copita soil is mapped on 39 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 39 percent of the area.
  • Highways inside the boundary: US 83. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Arroyo Tinajas.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring in New Falcon near Arroyo Tinajas?

Trinity Boring Solutions takes directional boring and horizontal directional drilling (HDD) work in New Falcon, where US 83 and Arroyo Tinajas shape route planning. EPA records do not tie a water provider to the place, and AEP Texas Central and Medina Electric Cooperative report service in Zapata County, so we identify the line owner before excavation. The Census Bureau counted 117 residents in 2020. We place water, sewer, gas, electric conduit and fiber beneath local streets such as Jaime J Zapata Street when the alignment and utility owner permit it.

Our main office is in Yukon, Oklahoma, and New Falcon work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has drilled directionally since 1982. With AEP Texas Central reporting service in Zapata County and water ownership confirmed address by address, our record of no utility strike in over 25 years starts with locating and exposing lines along routes such as US 83.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about New Falcon and Copita soil?

The USDA soil survey maps Copita fine sandy loam across 39 percent of New Falcon, so a route can start in loose textured surface soil. Tela sandy clay loam and Brennan fine sandy loam each cover 25 percent, with Aguilares fine sandy loam mapped under 6 percent. At about 40 inches below the surface, sandy clay loam is mapped across 56 percent and bedrock across 39 percent. The survey maps fine sandy loam at that depth across 6 percent, and reports average clay content of 22 percent. These are mapped patterns, not test borings, so the specific alignment still matters.

USDA soil survey, inside the New Falcon mapped community boundaryWhat is mapped
Soil series mappedCopita 39 percent, Tela 25 percent, Brennan 25 percent, Aguilares 6 percent and Hebbronville 6 percent
Texture at the surfacefine sandy loam 69 percent, sandy clay loam 25 percent and loamy fine sand 6 percent
Texture about 40 inches downsandy clay loam 56 percent, bedrock 39 percent and fine sandy loam 6 percent
Engineering class about 40 inches downclayey sand (SC) 50 percent, lean clay (CL) 6 percent and silty clayey sand (SC SM) 6 percent
Average clay content about 40 inches down22 percent
Bedrock mapped within 60 inches39 percent of the area (0 percent hard rock, 39 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils25 percent of the area
High corrosion risk for uncoated steel45 percent of the area

The USDA soil survey maps bedrock within 60 inches across 39 percent of New Falcon, typically at 37 inches, and identifies it as weathered rather than hard bedrock. A soil bit can handle weathered rock, but progress may slow where the route meets it. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 25 percent, a concern to check near Arroyo Tinajas. Near Jaime J Zapata Street, we consider casing and tracer wire because high steel corrosion risk is mapped across 45 percent of New Falcon. The Yegua Formation of the Claiborne Group, of Bartonian age, is described as mostly clay with lesser sandstone.

How do we drill New Falcon’s sandy clay loam?

We plan each New Falcon bore around the mapped sandy clay loam, fine sandy loam and weathered bedrock, rather than treating the soil map as a site test. Near Arroyo Tinajas, route depth and access also need attention.

  1. In Copita fine sandy loam, we support the bore as the hole advances and stage reaming so loose surface material does not cave behind the drill.
  2. Where the USDA survey maps sandy clay loam at about 40 inches, we adjust the bore plan to the changing layer and keep the pipe ready for installation.
  3. With weathered bedrock mapped within 60 inches across 39 percent of the area, we expect slower progress where the alignment meets rock and select tooling for that ground.
  4. Near Arroyo Tinajas, we plan the bore depth around the channel, hydrovac marked utilities before approaching them, and track the drill head to log depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where does a New Falcon line have to go under US 83?

US 83 is the only named highway mapped inside New Falcon’s community boundary, with 0.7 roadway miles there, so a crossing needs a route that avoids cutting the existing pavement. Jaime J Zapata Street is the longest named local street at 0.55 miles. Serna Street runs 0.39 miles and Ramireno Street 0.34 miles inside the community. East Street adds 0.33 miles. These streets help define local service routes, but the exact address and marked utilities determine where entry and exit pits can fit.

CrossingTypeMapped extentWho has a say
US 83US highway0.7 roadway miles insideState highway office
Arroyo TinajasStream0.81 channel miles insideChecked for Corps of Engineers jurisdiction
Arroyo Los GuajesStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside New Falcon or within one mile outside the community boundary, and no street and rail crossings are mapped. Arroyo Tinajas runs 0.81 channel miles inside the community, with two mapped street crossings of named streams. Arroyo Los Guajes is mapped 0.4 miles outside the boundary. Arroyo Tinajas is inside New Falcon, and no lakes or ponds are mapped within one mile, so we plan stream crossings accordingly. A bore near Arroyo Tinajas needs a depth plan for the channel and a check for federal waterway jurisdiction during planning.

Whose permission does New Falcon work need in Zapata County?

New Falcon is an unincorporated census designated place, so it has no city government; its local streets are handled by Zapata County, while US 83 is a state highway. Work in the US 83 right of way needs a TxDOT utility permit reviewed by the TxDOT Pharr District. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that application. TxDOT rules call for boring or tunneling beneath existing highway pavement, encasing crossings and extending a rural highway bore beneath all travel lanes. For electric or communication lines, the stated crossing cover is at least 60 inches below the lowest crossed grade. Water crossings also require planning for possible U.S. Army Corps of Engineers jurisdiction at Arroyo Tinajas.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in New Falcon, Zapata County?

The water provider for a specific New Falcon address has to be confirmed with Zapata County or the local water district before a bore is planned. EPA drinking water records do not tie a system to this community, so the provider cannot be matched by place name. AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County, but that does not identify the owner at every address. We confirm the electric line owner before planning a conduit bore near Jaime J Zapata Street.

Line ownerWhat it isSourceSize
AEP Texas Central and Medina Electric CooperativeElectric utilities reporting service in Zapata CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published reliably for a place as small as New Falcon, so the address and route are more useful than a housing age estimate. Service runs may follow Jaime J Zapata Street or US 83, and September averages 4.2 inches of rain compared with 0.8 inches in January, affecting when pits and access are wet. Paint shows utility position, not depth; we hydrovac pothole marked lines before drilling near them, including a marked line on a planned route beneath Jaime J Zapata Street. Texas811 requires notice at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near New Falcon and Los Lobos?

New Falcon is an unincorporated community in Zapata County, at an elevation of 409 feet and covering 0.2 square miles. Its ZIP code is 78545. Los Lobos is 4.7 miles southwest, Lopeño is 5.1 miles north, and Lago Vista is 5.2 miles south. Zapata, the county seat, is 20.9 miles northwest; Roma, the nearest larger city, is 16.4 miles south. The Yukon, Oklahoma main office is 706 road miles away, a 13.7 hour drive, so the distance is part of planning crew mobilization for work near US 83.

Places near New Falcon

What boring work comes up on Jaime J Zapata Street in New Falcon?

  • Highway crossing: A bore beneath US 83 keeps the highway pavement uncut, with the route and pits planned around marked lines and the utility owner’s permit.
  • Street service: A water or sewer line along Jaime J Zapata Street can be installed beneath the roadway without opening a trench across the street.
  • Fiber conduit: A route along East Street needs the conduit size, footage and marked utility positions before we plan the bore path.
  • Creek crossing: A bore beneath Arroyo Tinajas needs a channel depth plan and a check for U.S. Army Corps of Engineers jurisdiction during planning.
  • Electric conduit: Near Serna Street, we confirm the actual electric line owner and expose marked utilities before the drill approaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a New Falcon bore near East Street?

A map pin matters in New Falcon because a bore near East Street may have a different route, pavement and utility conflicts than one near Arroyo Tinajas. For a crossing on Serna Street, send us the address or pin, installation type, pipe or conduit size, and footage. A sketch or plans help us set the route and identify what needs to be exposed.

The job scope determines the price, starting with the 706 road miles from Yukon and the mobilization that distance requires. Copita fine sandy loam, sandy clay loam and mapped weathered bedrock affect drilling time and tooling. A crossing under US 83, marked utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill also change the work. High profile or emergency timing can add demands, and the pipe size and bore length affect the equipment and setup.

Questions people ask about boring in New Falcon

Does Trinity take boring jobs in New Falcon, Zapata County, and who staffs them?

Yes. Trinity Boring Solutions takes directional boring work in New Falcon, Zapata County. Our own crews handle jobs, and partner contractor satellite yards may support the work. For Zapata County work, we coordinate from the first call through the bore log with whichever crew is assigned to the site. The mapped route and utility owners near US 83 still set the job plan.

What ground should I expect for a New Falcon bore near Copita soil?

The USDA soil survey maps Copita fine sandy loam across 39 percent of New Falcon, and sandy clay loam across 56 percent at about 40 inches below the surface. Fine sandy loam and Tela sandy clay loam are also mapped. These are survey patterns, not test borings, so a route near Arroyo Tinajas still needs site specific planning.

Is there rock along a New Falcon bore, and how much bedrock is mapped?

Bedrock is mapped within five feet across 39 percent of New Falcon, typically at 37 inches, and the mapped material is weathered rather than hard. That can slow the bore where soil meets rock, so the route and tooling matter. The USDA soil survey does not map hard bedrock within 60 inches.

Who approves a New Falcon bore under US 83, and which state office reviews it?

TxDOT reviews a utility owner’s permit application for work in the US 83 right of way, through the TxDOT Pharr District. The utility owner files in RULIS, and we prepare the bore plan and profile. TxDOT rules call for a bored or tunneled highway crossing, so the route must account for pavement and travel lanes.

Can a New Falcon line be bored under Arroyo Tinajas?

A bore beneath Arroyo Tinajas can be planned, but the channel depth and crossing route need review first. The stream runs 0.81 channel miles inside the community, and two street crossings of named streams are mapped. During planning for an Arroyo Tinajas crossing, we check whether the work falls under US Army Corps of Engineers jurisdiction.

Who owns electric lines in New Falcon, Zapata County, and who confirms conduit specs?

AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County, but those records do not identify the owner at every New Falcon address. Confirm the line owner and conduit requirements for the specific route before planning a bore near US 83. The line owner also determines the requirements for its facilities.

How far is New Falcon from Yukon, and does being near Roma change a bore job?

New Falcon is 706 road miles from Trinity’s Yukon, Oklahoma main office, a 13.7 hour drive. Roma is 16.4 miles south of New Falcon, but it does not change the ground at the bore site. The Yukon distance can affect crew mobilization, while the address near US 83 or Arroyo Tinajas sets route and crossing needs.

How early should I call Texas811 for a New Falcon bore on Jaime J Zapata Street?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work on Jaime J Zapata Street slips more than 14 days past the original notice, make a new request. Marks show position, not depth; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a New Falcon directional bore under US 83?

The job details set the price, including bore length, pipe or conduit size, ground, utility conflicts, pavement, pits and equipment time. US 83 may require a highway crossing plan and permit coordination, while Copita soil and mapped bedrock affect the drilling plan. We account for the 706 road miles from Yukon when scheduling mobilization for New Falcon projects. Creek crossings and emergency timing can change the scope.

Where the New Falcon facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in New Falcon

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in New Falcon, Texas

Type the address of your job in New Falcon. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for New Falcon

Same county: Zapata · Medina · Siesta Shores · Falcon Lake Estates · San Ygnacio · Falcon Mesa · Morales-Sanchez · Las Palmas · Ramireno. All counties: Texas county list.