Pine Forest Texas Directional Boring: Spurger Soil, FM 1131 and Tenmile Creek
Quick Answer: You can get a line beneath FM 1131 or Tenmile Creek in Pine Forest without cutting the surface; we use directional boring, also called horizontal directional drilling (HDD). Pine Forest sits 499 road miles from our Yukon, Oklahoma main office, and Vidor lies 4.2 miles southeast. The USDA soil survey maps Spurger soil across 34 percent of the city, while clay at about 40 inches can cling to a reamer and grip pipe. That makes staged reaming important on a Tenmile Creek approach.
Pine Forest bores at a glance
- Incorporated city in Orange County, Texas. Population 505 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 499 miles, about 10.2 hours of driving.
- Ground: Spurger soil is mapped on 34 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1131 and FM 105. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Tenmile Creek and Tiger Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does Trinity handle directional boring beneath FM 1131 in Pine Forest?
You can get a line beneath FM 1131 or Tenmile Creek in Pine Forest without cutting the surface. Trinity Boring Solutions takes directional boring work in Orange County, where the Census Bureau Vintage 2024 estimate puts the population at 505. We install water, sewer, gas, electric conduit and fiber for routes along Lakeview Cutoff Street, Main Street or FM 105.
Our main office is in Yukon, Oklahoma, and Pine Forest work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a Pine Forest bore beneath FM 1131 or along Lakeview Cutoff Street is a more typical local route. For work near Lakeview Cutoff Street, we bring a family business started in 1965 and directional boring experience dating to 1982.

What does Spurger soil mean for drilling in Pine Forest?
The USDA soil survey maps Spurger soil across 34 percent of Pine Forest, with Spurger very fine sandy loam mapped across 19 percent and a frequently ponded Spurger and Caneyhead complex across 15 percent. Across Pine Forest, Spurger, Evadale, Belrose, and Vamont map soil patterns, not test borings, so we verify conditions before boring. At about 40 inches below the surface, clay covers 53 percent of the mapped area and average clay content is 40 percent; sandy ground covers 14 percent. That mix means a bore near Lakeview Cutoff Street may meet sticky clay at depth even where the surface feels loamy.
| USDA soil survey, inside the Pine Forest city limits | What is mapped |
|---|---|
| Soil series mapped | Spurger 34 percent, Evadale 19 percent, Belrose 14 percent, Vamont 13 percent and Simelake 5 percent |
| Texture at the surface | very fine sandy loam 34 percent, silt loam 27 percent and clay 19 percent |
| Texture about 40 inches down | clay 53 percent, silt loam 18 percent and very fine sandy loam 11 percent |
| Engineering class about 40 inches down | fat clay (CH) 57 percent, lean clay (CL) 22 percent and clayey sand (SC) 11 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 45 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 79 percent of the area |
For crossings near Tenmile Creek, bedrock is not mapped in Pine Forest’s top five feet, but deeper rock remains possible. The USDA survey maps a seasonal water table within 60 inches across 45 percent of the area, so pits near Tenmile Creek may need pumping. Flood prone soils cover 10 percent of the mapped area. When planning steel casing for FM 1131 crossings in Pine Forest, we consider that high steel corrosion risk is mapped across 79 percent. The geologic map shows Pleistocene Delta silt and clay, including plastic, compressible deposits, so the bore plan should account for wet, sticky ground and the line owner’s material choices.
How do crews bore through clay in Pine Forest?
We use horizontal directional drilling (HDD) to carry a line below Pine Forest ground, keeping the surface intact along streets such as Lakeview Cutoff Street and near Tenmile Creek.
- With clay mapped at about 40 inches in Pine Forest, we use thinner drilling fluid and staged reaming to limit sticky buildup on the reamer.
- Where heavy clay is mapped near Lakeview Cutoff Street, we watch fluid returns and keep pressure controlled so it does not lift pavement.
- The seasonal water table mapped across 45 percent of Pine Forest can fill pits near Tenmile Creek, so we plan small pits and pumping.
- Before drilling near FM 105, we hydrovac each marked utility on the bore path; a surface locate shows position, not depth.

What might a bore cross along FM 1131 in Pine Forest?
A Pine Forest bore may need to pass beneath FM 1131 or FM 105, the two state highways mapped inside the city limits. Lakeview Cutoff Street is the longest named street at 1.58 miles, followed by Main Street at 1.02 miles and Conner Road at 0.93 miles. Those street routes can involve existing pavement or driveways, where a bore can keep the surface intact. A route sketch helps show how the proposed line relates to the highway and the named streets.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1131 | State highway | 1.5 roadway miles inside | State highway office |
| FM 105 | State highway | 1 roadway miles inside | State highway office |
| Tenmile Creek | Stream | 2.97 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Tiger Creek | Stream | 1.8 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Caney Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Pine Forest or within one mile outside its limits, and no mapped street and rail crossings are present. Tenmile Creek runs 2.97 channel miles inside the city, while Tiger Creek runs 1.8 miles. Public mapping shows five street crossings of named streams, so a route near either creek needs careful review. With no lakes or ponds mapped within one mile of Pine Forest, we focus water feature checks on Tenmile Creek and Tiger Creek. A creek crossing also gets checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who approves a Pine Forest bore in Orange County?
For work along FM 1131 or FM 105, TxDOT’s Beaumont District reviews the utility permit because those roads are state highways. The utility that owns the line submits the application through TxDOT’s RULIS system, using the bore plan and profile we prepare. TxDOT rules call for boring or tunneling beneath existing highway pavement, and the permit can specify cover depth. Pine Forest is incorporated, so its city streets, including Lakeview Cutoff Street, belong to the city itself. A route at Tenmile Creek is also checked for federal waterway jurisdiction during planning. No railroad crossing is mapped in Pine Forest.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Orange County near Pine Forest?
The water provider for a specific Pine Forest address has to be confirmed with the city, the county or the local water district before a bore is planned; EPA drinking water records do not tie a named system to the town. Entergy Texas and Jasper-Newton Electric Cooperative report electric service in Orange County, but the line owner for a particular address still needs to be identified before a conduit bore. Near FM 105, hydrovac potholing can expose marked water and electric lines before drilling approaches them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas and Jasper-Newton Electric Cooperative | Electric utilities reporting service in Orange County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Pine Forest’s median housing year at 1978; 8 percent of homes were built before 1960, 69 percent from 1960 to 1999 and 23 percent in 2000 or later. That mix can mean replacement work as well as new service routes along Lakeview Cutoff Street. Before a bore crosses marked utilities, we expose them with hydrovac because locate marks show position, not depth.

What is near Pine Forest and Vidor?
Pine Forest is in Orange County, Texas, at an elevation of 13 feet and covers 2.82 square miles. Its ZIP code is 77662. Vidor is 4.2 miles southeast, Rose City is 4.8 miles south, Beaumont is 9.1 miles southwest, Rose Hill Acres is 9.4 miles west and Mauriceville is 10.5 miles east. Vidor is the nearest larger city; Orange, the county seat, is 17.1 miles east. From our Yukon, Oklahoma yard, Pine Forest is 499 road miles away, a 10.2 hour drive.
Places near Pine Forest
- Directional boring in Vidor: 4.2 miles southeast
- Directional boring in Rose City: 4.8 miles south
- Directional boring in Beaumont: 9.1 miles southwest
- Directional boring in Rose Hill Acres: 9.4 miles west
- Directional boring in Mauriceville: 10.5 miles east
What kinds of bores could serve Lakeview Cutoff Street in Pine Forest?
- Highway crossing: A bore beneath FM 1131 can keep the highway surface intact while carrying a water line or conduit across.
- Street service: A water or sewer connection along Lakeview Cutoff Street can pass beneath pavement rather than opening a trench across it.
- Creek crossing: A route under Tenmile Creek can leave the channel and its banks uncut, with jurisdiction checked during planning.
- Fiber route: A fiber conduit along Main Street can be drilled below the road surface and exposed utilities.
- Electric conduit: Near FM 105, hydrovac potholing can reveal marked lines before a conduit bore reaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Pine Forest bore near Tenmile Creek?
For a route such as Lakeview Cutoff Street, start with the address or map pin and say what will go underground. Tell us the pipe or conduit size and the footage, whether the route heads toward FM 1131 or Tenmile Creek. A sketch or plans can show the crossings and help us understand the work before preparing a quote.
The 499 road miles from Yukon affect mobilization for Pine Forest work, and the Spurger soil maps point to clay that may cling to a reamer. The route matters too: a crossing at FM 1131 or Tenmile Creek adds different planning and equipment needs than a run beside Main Street. Price factors include length, pipe size, soil, exposed utility crossings, pavement, creek work, pits, excavator time, sand backfill, emergency timing and mobilization.
Questions people ask about boring in Pine Forest
Does Trinity take directional boring work in Orange County near Pine Forest, and who staffs it?
Yes. We take Pine Forest work in Orange County using our own crews and crews from satellite yards operated by drilling contractors we have vetted. You work with Trinity from the first call through the bore log, regardless of which crew handles the route beneath FM 1131.
Could groundwater or flooding near Tenmile Creek affect a Pine Forest bore pit?
It can. The USDA survey maps a seasonal water table within 60 inches across 45 percent of Pine Forest and flood prone soils across 10 percent. Near Tenmile Creek, we plan pit placement and drainage with wet ground in mind, and check the creek crossing for jurisdiction during planning.
Does Spurger soil in Pine Forest create a corrosion issue for steel pipe?
The mapped soil conditions warrant attention to steel: high steel corrosion risk covers 79 percent of Pine Forest. For a Main Street crossing, we leave any coating choice for steel casing or tracer wire to the line owner. HDPE is not affected by soil corrosion, so the material choice depends on the line design near Lakeview Cutoff Street.
What ground should I expect in a Pine Forest bore through Spurger soil?
The USDA soil survey maps Spurger soil across 34 percent of Pine Forest. At about 40 inches below ground, clay is mapped across 53 percent of the area, with average clay content of 40 percent. Those mapped patterns are not test borings, but they signal that a bore near FM 105 may encounter sticky clay.
Could a bore in Pine Forest encounter deeper rock near Caney Creek?
Bedrock is not mapped in the top five feet of Pine Forest, but the map does not rule out rock at greater depth. The geologic map shows Pleistocene Delta silt and clay, so a route near Tenmile Creek should be planned for clay and silt rather than assumed to be rock free.
Who approves a utility bore beneath FM 1131 in Pine Forest?
TxDOT’s Beaumont District reviews a utility permit for work in the FM 1131 right of way. The line owner submits the application through RULIS, and we prepare the bore plan and profile for that filing. At FM 105 crossings in Pine Forest, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement.
How early should I request a locate for a Pine Forest bore near Lakeview Cutoff Street?
Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a Lakeview Cutoff Street start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed through Texas811.
How far is Pine Forest from the Yukon office, and does Vidor change the job?
Pine Forest is 499 road miles from our Yukon, Oklahoma main office, so we plan travel around that distance and the 10.2 hour drive. Vidor is 4.2 miles southeast, but the job still needs its own route, ground and crossing review. Distance from Yukon can affect mobilization for work on FM 1131 or near Tenmile Creek.
What affects the cost of a Pine Forest directional bore beneath FM 1131?
The route and scope shape the quote, including bore length, pipe or conduit size, clay conditions, utilities to expose and pavement at FM 1131. Creek or drainage crossings, pits, excavator time, backfill and emergency timing can also affect the work. The 499 road miles from Yukon are part of mobilization planning.
Where the Pine Forest facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Pine Forest
- U.S. Census Bureau, TIGER/Line 2024: Pine Forest boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Pine Forest
- U.S. Census Bureau, American Community Survey 2019 to 2023: Pine Forest housing units and year built
- Macrostrat geologic map compilation: map units under Pine Forest
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Orange County
- U.S. Geological Survey, Elevation Point Query Service: Pine Forest elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Pine Forest
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Pine Forest
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Pine Forest, Texas
Type the address of your job in Pine Forest. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Pine Forest
Same county: Orange · Bridge City · West Orange · Pinehurst · Forest Heights · Little Cypress. All counties: Texas county list.
