trinityboringsolutions.com

Pinehurst Texas Directional Boring: Orcadia Soil, Interstate 10, Adams Bayou

Quick Answer: Can you get a line under Interstate 10 in Pinehurst without cutting it? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings there. The Yukon, Oklahoma main office is 529 road miles from Pinehurst, and Orange is 1.5 miles northeast for nearby work. Orcadia soil is mapped across most of Pinehurst, with clay loam at about 40 inches that can cling to the reamer and pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Pinehurst bores at a glance

  • Incorporated city in Orange County, Texas. Population 2,226 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 529 miles, about 10.4 hours of driving.
  • Ground: Orcadia soil is mapped on 93 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 10, US 90 Business, US 90 and Texas State Highway 358. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Pinehurst, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can handle directional boring in Pinehurst under Interstate 10?

Trinity Boring Solutions handles directional boring in Pinehurst, Orange County, where the Census Bureau Vintage 2024 estimate lists 2,226 residents. Can you get a water, sewer, gas, electric conduit or fiber line under Interstate 10 or a Pinehurst street without cutting the surface? We install those lines by route, with the crossing and access shaping the bore.

Our main office is in Yukon, Oklahoma, and Pinehurst work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service near Whippoorwill Street and a 48 inch casing for an Interstate 10 crossing fit our range of 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, experience we bring to Pinehurst street and highway work.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pinehurst ground like in Orcadia soil?

The USDA soil survey maps Orcadia soil across 93 percent of Pinehurst, so many bore routes meet a consistent local soil pattern. The surface is mapped as silt loam, while about 40 inches down, 93 percent of the area is mapped as clay loam. That depth is sticky ground rather than sandy ground, and the mapped average clay content there is 39 percent. Cowmarsh mucky silty clay covers 6 percent of the area. These are soil survey patterns, not test borings, so the exact route still matters.

USDA soil survey, inside the Pinehurst city limitsWhat is mapped
Soil series mappedOrcadia 93 percent and Cowmarsh 6 percent
Texture at the surfacesilt loam 93 percent and mucky silty clay 6 percent
Texture about 40 inches downclay loam 93 percent and clay 6 percent
Engineering class about 40 inches downfat clay (CH) 93 percent and elastic silt (MH) 6 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches100 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Along Pinehurst routes, the USDA soil survey does not map bedrock in the top five feet; that does not rule out deeper rock. A seasonal water table is mapped within 60 inches throughout the area, so Pinehurst bore pits may need pumping. Flood prone soils cover 6 percent, including Cowmarsh areas, so a route near Adams Bayou needs careful depth planning. High steel corrosion risk is mapped throughout the city, a concern for steel casing and tracer wire that the line owner should address. The geologic map shows Alluvial Gravelly Sand of Holocene age, with sand, clay, gravel and silt.

How do we drill Pinehurst clay loam?

We drill Pinehurst routes through mapped Orcadia clay loam in controlled stages, using the soil survey and the crossing plan to manage sticky cuttings and protect nearby pavement.

  1. Orcadia clay loam can stick to the reamer, so we use thinner drilling fluid and staged reaming to keep Pinehurst cuttings manageable.
  2. Because Pinehurst soil is heavy clay at about 40 inches, we watch fluid returns closely and avoid pressure that could lift pavement.
  3. The seasonal water table mapped across Pinehurst can fill entry and exit pits, so we plan small pits and pumping where needed.
  4. At Whippoorwill Street, we expose each marked utility on the bore path with hydrovac before drilling near it, since surface marks do not show depth.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a Pinehurst bore go under Whippoorwill Street?

Pinehurst has Interstate 10, US 90 Business, US 90 and Texas State Highway 358 within its limits, each with 0.8 mapped roadway miles in the city. A bore beneath existing highway pavement is installed by boring or tunneling, not by cutting across the surface. Whippoorwill Street is the longest named street at 0.86 miles, followed by Strickland Drive at 0.82 miles and Lutcher Drive at 0.77 miles. Those street lengths help describe the local route, but the actual crossing plan depends on the address and marked utilities.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate0.8 roadway miles insideState highway office
US 90 BusinessUS highway0.8 roadway miles insideState highway office
US 90US highway0.8 roadway miles insideState highway office
Texas State Highway 358State highway0.8 roadway miles insideState highway office
Texas State Highway 87Highway nearbyRuns along or touches the city limitsState highway office
Union PacificRailroad nearby0.2 miles outsideThe railroad
Orange Port Terminal RailwayRailroad nearby0.2 miles outsideThe railroad
Adams BayouStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Gum GullyStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad track is mapped inside Pinehurst, but Union Pacific and Orange Port Terminal Railway tracks are each 0.2 miles outside the city limits. No street and rail crossings are mapped inside the city. Adams Bayou touches the boundary, while Gum Gully is within 1.0 mile; unnamed drainage totals 2.12 miles in Pinehurst. No street crossings of named streams or lakes and ponds within one mile are mapped, but an Adams Bayou route still needs channel planning.

Whose permission does a Pinehurst bore in Orange County need?

For Interstate 10 or another state highway in Pinehurst, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Beaumont District reviews it. The owner submits our bore plan and profile, and we work under the permit issued to that owner. Cover depth shapes the route: electric and communication lines need 60 inches at a highway crossing and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. Pinehurst is incorporated, so its city streets, including Whippoorwill Street, belong to the city. A Union Pacific or Orange Port Terminal Railway crossing needs an agreement from the railroad that owns the track. An Adams Bayou crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Pinehurst water system?

The City of Pinehurst public water system uses groundwater wells and reports 1,065 service connections serving 3,131 people. That existing water network matters when setting a route near Pinehurst streets. Entergy Texas and Jasper-Newton Electric Cooperative report electric service in Orange County, but those records do not identify the provider at each address. We confirm the line owner before planning an electric conduit bore near the City of Pinehurst system.

Line ownerWhat it isSourceSize
City of PinehurstPublic water systemGroundwater wells1,065 connections, 3,131 people served
Entergy Texas and Jasper-Newton Electric CooperativeElectric utilities reporting service in Orange CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We keep Pinehurst’s 1978 median housing year in view when discussing underground work and routing. It estimates 15 percent of housing was built before 1960, 68 percent from 1960 to 1999 and 17 percent in 2000 or later. That mix can mean work on an older line as well as new service near Strickland Drive. Before the drill gets close, we hydrovac pothole marked utilities along the bore path; paint on Whippoorwill Street shows a line’s position, not its depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Pinehurst from West Orange and the Yukon yard?

Pinehurst is an incorporated city in Orange County, with an area of 1.71 square miles and an elevation of 9 feet. ZIP code 77630 covers the city. Orange, the county seat and nearest larger city, is 1.5 miles northeast; West Orange is 2.1 miles south, and Little Cypress is 5.0 miles north. Bridge City is 6.6 miles southwest and Forest Heights is 8.8 miles north. The Yukon, Oklahoma yard is 529 road miles away, a 10.4 hour drive, so distance is part of planning a Pinehurst mobilization.

Places near Pinehurst

Which jobs call for a bore near Pinehurst’s Strickland Drive?

  • Highway crossing: A bore beneath Interstate 10 avoids cutting through the existing pavement and follows the cover depth in the permit.
  • Water service: A new connection near the City of Pinehurst system needs a route planned around existing groundwater lines and marked utilities.
  • Fiber conduit: A fiber route along Strickland Drive can pass beneath the street without opening a trench across its surface.
  • Creek crossing: A route beneath Adams Bayou needs depth planning to stay below the channel and a jurisdiction check during planning.
  • Rail crossing: A bore near the Union Pacific track outside Pinehurst needs an agreement with the railroad that owns the track.
  • Street crossing: A service route beneath Whippoorwill Street can leave the paved surface uncut while pits sit on each side.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of Pinehurst directional boring near Union Pacific?

For Pinehurst quotes, we use the address or map pin, planned material, pipe or conduit size, footage, and any sketch or plans. An Interstate 10 crossing, a route near Union Pacific or a service on Strickland Drive can call for different bore plans, so those details help us understand the actual scope.

For Pinehurst, we set the price from the job details for each bore. Ground conditions matter because Orcadia clay loam can cling to the reamer, while a shallow seasonal water table can affect pits. Crossings matter too: concrete or pavement near Interstate 10, marked utilities on Whippoorwill Street, or a route near Union Pacific can change the work. Creek or drainage crossings, pit size, excavator time and sand backfill also affect the scope. Mobilization reflects Pinehurst’s 529 road miles from Yukon, and high profile or emergency work can add planning needs.

Questions people ask about boring in Pinehurst

Does Trinity Boring Solutions take jobs in Pinehurst and Orange County?

Yes, Trinity Boring Solutions takes directional boring work in Pinehurst and across Texas. The Yukon main office coordinates each job, and work in Orange County is handled by our crews or partner drilling contractors we have vetted. From first call through bore log, we keep your Trinity contact consistent on Pinehurst work, regardless of which crew handles the site.

Will a Pinehurst bore run into rock?

Bedrock is not mapped within the top five feet of Pinehurst, though that does not rule out deeper rock. The geologic map shows Alluvial Gravelly Sand of Holocene age, with sand, clay, gravel and silt. The route still needs to be planned for actual conditions, particularly where deeper material differs from the mapped surface.

Who approves a Pinehurst bore under Interstate 10?

For work in the Interstate 10 right of way, the utility owner files the TxDOT utility permit through RULIS, and the TxDOT Beaumont District reviews it. We prepare the bore plan and profile for that owner. The permit establishes the crossing conditions, including the required cover depth beneath Interstate 10.

What do we need for a Pinehurst bore under Union Pacific track?

A bore beneath Union Pacific track needs an agreement from Union Pacific, which sets crossing conditions such as casing, depth and flagging. The track is mapped 0.2 miles outside Pinehurst city limits. If a line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.

Can a line be bored under Adams Bayou near Pinehurst?

A line can be planned beneath Adams Bayou, which touches the Pinehurst boundary, but the route and channel depth need review. During Pinehurst planning, we check whether the crossing falls under US Army Corps of Engineers jurisdiction. The nearby drainage and the mapped shallow seasonal water table also matter when locating the bore pits.

Who runs Pinehurst’s public water system, and do groundwater wells supply it?

The City of Pinehurst owns the public water system, and groundwater wells supply it, a factor in underground planning. The system reports 1,065 service connections serving 3,131 people. That network is an important locate and potholing consideration when planning a new line near Pinehurst streets.

Does Trinity work outside Pinehurst near Orange and other nearby places?

Yes, Trinity takes work across Texas, including places around Orange, West Orange, Little Cypress and Bridge City. The Yukon office coordinates the job, with crews or vetted partner drilling contractors handling the work. The site location and route determine the equipment and mobilization plan.

How much notice does Texas811 need for a Pinehurst bore on Whippoorwill Street?

For a Whippoorwill Street bore, plan around a 20 day ticket window: request the locate at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Pinehurst work, if the start slips more than 14 days past the original notice, we make a new request. Before work resumes in Pinehurst, we refresh worn or moved marks through Texas811.

What affects the cost of directional boring near Interstate 10 in Pinehurst?

The Pinehurst job scope determines the price, including bore length, pipe or conduit size, soil, utility crossings and exposed lines. Pavement near Interstate 10, drainage crossings and pit work can change the plan. Mobilization also matters because Pinehurst is 529 road miles from the Yukon yard; high profile or emergency work can add planning demands.

Where the Pinehurst facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Pinehurst

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Pinehurst, Texas

Type the address of your job in Pinehurst. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Pinehurst

County: Montgomery County directional boring. Same county: Conroe · The Woodlands · Willis · Magnolia · Houston · Shenandoah · Oak Ridge North · Montgomery · Panorama Village · Roman Forest · Splendora · Patton Village. All counties: Texas county list.