trinityboringsolutions.com

Forest Heights Texas Directional Boring: Evadale Silt Loam, Highway 87, Beaumont Sand

Quick Answer: Forest Heights is an unincorporated community in Orange County, so no city government owns its streets. We take directional boring, also called horizontal directional drilling (HDD), in Texas for routes beneath Texas State Highway 87 without cutting its pavement. Our Yukon, Oklahoma main office is 499 road miles away, making Woodland Ridge Drive access part of mobilization planning. Evadale silt loam is common here; its soft ground can wash out if drilling fluid pressure is too high.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Forest Heights bores at a glance

  • Unincorporated community in Orange County, Texas. Population 1,329 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 499 miles, about 10.4 hours of driving.
  • Ground: Evadale soil is mapped on 67 percent of the area, with silt loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 87. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Woodland Ridge Drive in Forest Heights?

Forest Heights is an unincorporated community in Orange County, so a contractor such as Trinity Boring Solutions handles a bore request for Woodland Ridge Drive rather than a city street department. We install water, sewer, gas, electric conduit and fiber on routes beneath Forest Heights streets, including Abes Drive. The Census Bureau counted 1,329 people here in the 2020 Census; that population and the local street network help frame service and replacement work.

Our main office is in Yukon, Oklahoma, and Forest Heights work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a Forest Heights service route along 16th Street is a smaller job, with its own soil and utility checks.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show about Forest Heights and Evadale soil?

The USDA soil survey maps Evadale soil across much of Forest Heights, with Evadale Gist complex covering 53 percent of the mapped area and Evadale silt loam another 8 percent. Silt loam makes up 81 percent of mapped surface texture. At about 40 inches below the surface, silt loam accounts for 65 percent of mapped texture, clay averages 31 percent, and only 3 percent of the area is mapped as sandy. These are survey patterns, not test borings; a route near Pea Farm Road still needs site specific planning.

USDA soil survey, inside the Forest Heights mapped community boundaryWhat is mapped
Soil series mappedEvadale 67 percent, Cowmarsh 10 percent, Texla 6 percent, Camptown 6 percent and Spurger 5 percent
Texture at the surfacesilt loam 81 percent, mucky silty clay 10 percent and very fine sandy loam 6 percent
Texture about 40 inches downsilt loam 65 percent, clay 16 percent and silty clay 8 percent
Engineering class about 40 inches downlean clay (CL) 73 percent, fat clay (CH) 14 percent and elastic silt (MH) 10 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches90 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel95 percent of the area

Bedrock is not mapped within the top five feet in Forest Heights, but that does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 90 percent of the area, so bore pits near Woodland Ridge Drive may need pumping. Flood prone soils cover 10 percent, while high steel corrosion risk covers 95 percent. The Pleistocene Beaumont Formation includes fine sand, silt and minor gravel; changing layers can affect steering and fluid control.

How do crews handle Forest Heights silt loam during a bore?

In Forest Heights, our crews adjust fluid and reaming to the silt loam and clay mapped near streets such as 16th Street. The drill head is tracked from the surface, with depth and pitch logged as the bore advances.

  1. Silt loam on Forest Heights routes can wash out under excess fluid, so we keep pressure low near pavement on Texas State Highway 87.
  2. Clay appears in mapped soils about 40 inches down; staged reaming and a thinner fluid mix help limit sticky cuttings near 16th Street.
  3. With a seasonal water table mapped within 60 inches across much of Forest Heights, pits near Woodland Ridge Drive may need pumping.
  4. Before a bore approaches marked lines on Abes Drive, we hydrovac pothole them; the locator tracks the head and records depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads, tracks or creeks could a bore cross in Forest Heights near Texas State Highway 87?

Texas State Highway 87 runs for 1.2 mapped roadway miles inside Forest Heights, making its pavement the main state road crossing to plan around. Woodland Ridge Drive is the longest named street at 1.99 miles, followed by 16th Street at 1.2 miles and Abes Drive at 0.96 miles. A bore can pass beneath pavement rather than cut it, but the route and access pits still need to fit the road right of way and the nearby buried lines.

CrossingTypeMapped extentWho has a say
Texas State Highway 87State highway1.2 roadway miles insideState highway office
Sabine River and Northern RailroadRailroad nearby0.2 miles outsideThe railroad
CPKC (Kansas City Southern)Railroad nearby0.5 miles outsideThe railroad
Swipe the table sideways to see every column.

No railroad is mapped inside Forest Heights, and no street and rail crossing is mapped there. The Sabine River and Northern Railroad is 0.2 miles from the mapped community boundary; CPKC is 0.5 miles away. No named stream or lake is mapped inside or within one mile, while unnamed drainage totals 9.41 miles in the community. A route near drainage or nearby tracks needs its own crossing review before drilling.

Who has to sign off on a Forest Heights bore in Orange County?

For streets in Forest Heights, an unincorporated community in Orange County, street authority is with the county rather than a city government; Texas State Highway 87 is handled by TxDOT. For work in that highway right of way, the line owner files the utility permit through TxDOT’s RULIS system, with the Beaumont District reviewing it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover rules include 60 inches for electric or communication lines crossing the highway and 48 inches along its right of way. A crossing near the Sabine River and Northern Railroad also requires an agreement with that railroad’s owner.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Forest Heights, Orange County?

The water provider for a specific Forest Heights address has to be confirmed with Orange County, the county or the local water district before a bore is planned. Entergy Texas and Jasper-Newton Electric Cooperative report electric service in Orange County, but that does not identify the provider for every address. Before planning conduit near Abes Drive, we confirm the line owner for that route rather than assume which utility serves it.

Line ownerWhat it isSourceSize
Entergy Texas and Jasper-Newton Electric CooperativeElectric utilities reporting service in Orange CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Forest Heights housing at a median build year of 1987: 16 percent predates 1960, 64 percent dates from 1960 to 1999, and 20 percent is from 2000 or later. A replacement bore near 16th Street may meet older buried service lines, while newer housing may call for a new service route. We hydrovac expose marked utilities on the bore path before drilling nearby; surface paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Forest Heights from Deweyville and the Yukon yard?

Forest Heights is in Orange County, at an elevation of 25 feet and covering 2.82 square miles. Its ZIP code is 77632. Deweyville is 4.5 miles north, Little Cypress is 4.0 miles south, Mauriceville is 6.6 miles west, and Orange is 7.7 miles south. Orange is both the county seat and the nearest larger city. The Yukon, Oklahoma yard is 499 road miles away, a 10.4 hour drive, so distance is a practical part of scheduling a bore on Woodland Ridge Drive.

Places near Forest Heights

What kinds of bores could come up on Abes Drive in Forest Heights?

  • Highway crossing: A water or communication route beneath Texas State Highway 87 uses a bore rather than open trenching through existing pavement.
  • Street service: A water or sewer service along Woodland Ridge Drive can pass beneath pavement, with access pits set off the traveled surface.
  • Fiber route: A fiber conduit route near 16th Street needs marked utilities exposed before the drill approaches them.
  • Drainage crossing: Unnamed drainage mapped in Forest Heights calls for route planning that keeps the bore below the channel.
  • Rail crossing: A route approaching the Sabine River and Northern Railroad needs coordination with the track owner before a crossing is planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of Forest Heights work near the Sabine River and Northern Railroad?

For a quote on Woodland Ridge Drive, start with the address or map pin so we can place the route. Tell us what goes underground, such as water or fiber, then give the pipe or conduit size and the footage. A sketch or plans help show whether the route approaches Texas State Highway 87, drainage or existing lines.

Price follows the route and scope, not just the footage. Evadale silt loam and clay affect ground conditions; Texas State Highway 87 adds pavement and permit planning, while nearby Sabine River and Northern Railroad tracks may add crossing coordination. We also account for pipe size, utilities to expose, concrete or pavement, drainage crossings, pits, excavator time and backfill. At 499 road miles from Yukon, mobilization is another job specific factor.

Questions people ask about boring in Forest Heights

Does Trinity Boring Solutions take directional boring jobs in Forest Heights, Orange County, and who staffs them?

Yes. We take directional boring work in Forest Heights and serve Texas from our Yukon main office, using our crews and vetted drilling partners for the work. You deal with Trinity from the first call through the bore log, including when a crew is working near Woodland Ridge Drive.

Who controls the streets in Forest Heights, and can a bore avoid cutting Abes Drive?

Forest Heights has no city government because it is an unincorporated community, so county authority applies to local streets such as Abes Drive. A directional bore can pass below the street instead of cutting its surface. The route still needs utility locating and room for pits on each side.

How do Forest Heights housing ages and buried lines affect replacement bores near 16th Street?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1987, with 16 percent of homes built before 1960. A replacement route near 16th Street may encounter older services mixed with later installations. We expose marked utilities along the bore path before drilling close to them.

Could groundwater or flood prone ground affect bore pits in Forest Heights Evadale soil?

It could. The USDA soil survey maps a seasonal water table within 60 inches across 90 percent of Forest Heights, while flood prone soils cover 10 percent. Evadale soil is common here, so pits near Woodland Ridge Drive may need to be kept small and pumped if water enters.

Does Forest Heights Evadale soil corrode steel, and what pipe can be used?

The soil survey maps high steel corrosion risk across 95 percent of Forest Heights, so the line owner should consider the casing and tracer wire materials for a route near Abes Drive. HDPE pipe is not affected by soil corrosion. The line owner chooses any coating for steel components.

What ground does a bore pass through in Forest Heights Evadale soil?

The USDA soil survey maps Evadale soil widely in Forest Heights, with silt loam the leading surface texture. At about 40 inches down, silt loam covers 65 percent of mapped texture and clay averages 31 percent. Those are mapped patterns, not test borings, so a route near Pea Farm Road still needs field planning.

What bore sizes and lengths can Trinity handle for a Forest Heights job near Pea Farm Road?

We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. That range can cover a short service near Pea Farm Road or a longer route, depending on the site and the line being installed.

How much notice does Texas811 need for Forest Heights work near Woodland Ridge Drive, and what if marks move?

For a bore near Woodland Ridge Drive, Texas811 requires notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a Forest Heights directional bore near Texas State Highway 87?

The route length and pipe size matter, as do Evadale soil conditions, pavement, marked utilities to expose and any drainage crossing. A bore under or beside Texas State Highway 87 brings its own permit and cover planning. Mobilization from Yukon also matters because Forest Heights is 499 road miles from the yard.

Where the Forest Heights facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Forest Heights

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Forest Heights, Texas

Type the address of your job in Forest Heights. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Forest Heights

Same county: Bridge City · Vidor · West Orange · Pine Forest · Rose City. All counties: Texas county list.