trinityboringsolutions.com

Las Palmas Texas Directional Boring: Comitas Soil, Sand Sheet Deposits and Arroyo Molletes

Quick Answer: Before a bore near Palmas Loop, confirm the water provider for that address and the electric line owner; county reports name AEP Texas Central and Medina Electric Cooperative, but do not identify the provider at each Las Palmas address. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), in Texas for routes such as Las Palmas Road. Las Palmas is 682 road miles from our Yukon yard, with Zapata 3.5 miles south as the nearest larger place. Comitas loamy fine sand covers 54 percent of the mapped area, so the hole needs support against loose sand.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Las Palmas bores at a glance

  • Unincorporated community in Zapata County, Texas. Population 59 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 682 miles, about 13.2 hours of driving.
  • Ground: Comitas soil is mapped on 54 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 41 percent of the area.
  • No state or US highway is mapped inside the boundary or within a mile and a half of it.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Palmas Loop in Las Palmas?

Trinity Boring Solutions takes directional boring work in Las Palmas, but the water provider for a Palmas Loop address and the electric line owner must be confirmed before we plan the bore. AEP Texas Central and Medina Electric Cooperative report service in Zapata County, not necessarily at every address. The Census Bureau counted 59 people in Las Palmas in 2020. Along Las Palmas Road or Las Palmas Drive, we install water, sewer, gas, electric conduit and fiber lines by bore.

Our main office is in Yukon, Oklahoma, and Las Palmas work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982, experience we bring to crossings in Comitas soil. That experience covers work from 3/4 inch service lines to 48 inch casing, a range that can suit a small service run along Las Palmas Court or a larger crossing near Palmas Loop.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show beneath Las Palmas and Comitas?

The USDA soil survey maps Comitas loamy fine sand across 54 percent of Las Palmas and Copita fine sandy loam across 41 percent. Brennan fine sandy loam accounts for 4 percent. About 40 inches down, the survey maps fine sandy loam across 54 percent and bedrock across 41 percent; the remaining mapped texture is sandy clay loam. At that depth, 59 percent of the area is mapped as sandy, while average clay content is 15 percent. These are mapped soil patterns, not test borings, so a Palmas Loop route still needs job specific planning.

USDA soil survey, inside the Las Palmas mapped community boundaryWhat is mapped
Soil series mappedComitas 54 percent, Copita 41 percent and Brennan 4 percent
Texture at the surfaceloamy fine sand 54 percent and fine sandy loam 46 percent
Texture about 40 inches downfine sandy loam 54 percent, bedrock 41 percent and sandy clay loam 4 percent
Engineering class about 40 inches downsilty clayey sand (SC SM) 54 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down15 percent
Bedrock mapped within 60 inches41 percent of the area (0 percent hard rock, 41 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel41 percent of the area

Bedrock is mapped within 60 inches across 41 percent of Las Palmas, with a typical depth of 37 inches; the mapped bedrock is weathered, and hard bedrock is not mapped within that depth. No seasonal water table or flood prone soils are mapped. High steel corrosion risk covers 41 percent of the area, which matters for casing and tracer wire choices; the line owner selects any coating. The geologic map includes Holocene sand sheet deposits and Middle Eocene sedimentary material, so a bore near Las Palmas Drive may move from loose surface sand into firmer material.

How do we drill Las Palmas ground with fine sandy loam?

For a Las Palmas route through Comitas loamy fine sand or Copita fine sandy loam, we support the bore path as it advances and adjust the plan to the mapped ground. Surface mapping guides planning, while the actual conditions along Palmas Loop decide the work.

  1. In Comitas loamy fine sand, we use drilling fluid to help hold the bore path open, then ream in stages so loose ground is less likely to cave.
  2. Where Las Palmas soil gives way to the mapped weathered bedrock, we track depth and pitch as each drill rod advances and allow for slower progress.
  3. Before a bore approaches a marked line beside Las Palmas Road, we expose that utility with hydrovac; surface marks show its position but not its depth.
  4. At a Palmas Loop work area, we keep pits in the dirt and pull the line through the bore so the street surface can remain uncut.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a Las Palmas bore have to cross near Arroyo Molletes?

No highway is mapped inside the Las Palmas community boundary or within 1.5 miles outside it, so mapped road work here centers on local streets rather than a highway crossing. Palmas Loop has 0.44 miles inside the community, Las Palmas Road has 0.39 miles, and Las Palmas Drive has 0.2 miles. Las Palmas Court adds another named route. A bore can pass beneath a street without cutting its surface, but the route and access points still need to fit the specific street and its buried lines.

CrossingTypeMapped extentWho has a say
Arroyo MolletesStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo RanchitoStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo IndigoStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Las Palmas boundary or within 1 mile outside it, and none of the mapped street crossings here involves a railroad. Arroyo Molletes is 0.7 miles from the boundary; Arroyo Ranchito and Arroyo Indigo are also nearby, but no named stream crosses the community. No mapped street crosses a named stream inside Las Palmas, and no lake or pond is mapped within one mile. If a planned route reaches a creek, its channel conditions and possible federal jurisdiction need review.

Do I need a permit for a Las Palmas bore in Zapata County?

Las Palmas is an unincorporated community in Zapata County, so it has no city government to permit its streets; the county or state controls the applicable road approval. No highway is mapped inside the community or within 1.5 miles outside it. If a project reaches an Interstate, US, Texas state, farm to market or ranch to market road right of way, TxDOT’s Pharr District reviews the utility permit. The utility owner files through RULIS, and we prepare the bore plan and profile for its application. No railroad is mapped nearby; any rail route would need an agreement from its owner. A proposed crossing of Arroyo Molletes would be checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities own lines in Las Palmas and Zapata County?

The water provider for a specific Las Palmas address must be confirmed with the county or local water district before a bore is planned; available drinking water records do not match a system to this place. AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County, but that does not establish which company owns a line beside Palmas Loop. We confirm the electric line owner for the route before planning a conduit bore, because the owner and location affect the design.

Line ownerWhat it isSourceSize
AEP Texas Central and Medina Electric CooperativeElectric utilities reporting service in Zapata CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published for a place as small as Las Palmas, so the age of buried service lines along Las Palmas Road cannot be inferred from a local housing estimate. A replacement bore may follow an existing utility route, while a new service may need a longer run along a named street. Zapata County averages 4.2 inches of rain in September and 0.8 inches in January. Before drilling near marked lines, we hydrovac pothole each one on the route; paint shows position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Las Palmas from Medina and the Yukon yard?

Las Palmas is an unincorporated census designated place in Zapata County, about 3.5 miles north of Zapata, the county seat. The mapped community covers 0.07 square miles at an elevation of 507 feet, and its ZIP code is 78076. Medina is 1.3 miles southeast; Falcon Lake Estates is 5.6 miles south, Falcon Mesa is 5.7 miles south, and Siesta Shores is 7.1 miles south. From our Yukon yard, the drive is 682 road miles and 13.2 hours, which makes mobilization part of planning a Las Palmas job.

Places near Las Palmas

Which jobs call for a bore near Las Palmas Drive in Las Palmas?

  • Water service: A small service bore can run toward a property along Las Palmas Court after the address specific water provider is confirmed.
  • Fiber conduit: A route beside Las Palmas Drive can carry fiber underground while keeping the street surface uncut.
  • Sewer line: A sewer bore along Las Palmas Road needs a route plan that accounts for the fine sandy loam mapped in the community.
  • Electric conduit: Before a conduit bore near Palmas Loop, we confirm which county reported electric provider owns the line at that address.
  • Creek crossing: A proposed route near Arroyo Molletes needs channel planning and a check for federal jurisdiction.
  • Service replacement: A replacement bore along Palmas Loop can follow an existing route after marked utilities are exposed and verified.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Palmas Loop in Las Palmas?

For a Las Palmas quote, start with the address or map pin, such as a location on Palmas Loop. Tell us what will go in the ground, whether it is a water line or fiber conduit, and give the pipe or conduit size and footage. A sketch or plan helps show how the route relates to Las Palmas Road and any marked utilities.

The work along Palmas Loop is priced around its actual scope. Ground conditions matter because Comitas loamy fine sand can need support, and weathered bedrock is mapped in part of Las Palmas. Crossings and exposures matter too, including buried lines, pavement, concrete, drainage and any creek route near Arroyo Molletes. Pits, excavator time and sand backfill affect the work area. The 682 road miles from Yukon also make mobilization a job factor, along with high profile or emergency scheduling.

Questions people ask about boring in Las Palmas

Does Trinity Boring Solutions take directional boring jobs in Las Palmas, Zapata County?

Yes. We take directional boring work in Las Palmas, with the job handled by our own crews or through a satellite yard run by a partner drilling contractor we have vetted. You work with Trinity throughout the project, regardless of which crew is on site. For a route on Palmas Loop, the local line owners still need to be confirmed.

How old are the houses and buried lines along Las Palmas Road?

Housing age figures are not published for Las Palmas because the survey sample is too small to rely on, so they cannot establish when lines along Las Palmas Road were installed. A replacement bore may use an existing utility corridor, while a new service may need a separate route. Along Las Palmas Road, we expose marked utilities before drilling near them to help protect existing underground lines.

Does Comitas soil in Las Palmas corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 41 percent of Las Palmas, including areas with Comitas soil. The line owner should weigh that risk when choosing steel casing or tracer wire and decide whether a coating is needed. HDPE is not affected by soil corrosion, but the line owner selects the material for the project.

What ground does a bore pass through in Las Palmas near Comitas soil?

Comitas loamy fine sand covers 54 percent of the mapped Las Palmas area, with Copita fine sandy loam covering 41 percent. About 40 inches below the surface, fine sandy loam is mapped across 54 percent and bedrock across 41 percent. These are USDA soil survey patterns, not test borings, so conditions along a Palmas Loop route can differ.

Is bedrock mapped within five feet of the surface in Las Palmas?

Yes. The USDA soil survey maps bedrock within 60 inches across 41 percent of Las Palmas, typically at 37 inches, and classifies it as weathered rather than hard bedrock. That can slow a bore where the route meets rock. The survey does not map a seasonal water table within 60 inches.

Can a line be bored under Arroyo Molletes near Las Palmas?

A bore under Arroyo Molletes can be considered after the channel route and ground are assessed; the stream is mapped 0.7 miles from the Las Palmas boundary. When planning a crossing near Arroyo Molletes, we check whether it falls under US Army Corps of Engineers jurisdiction. The mapped community has no street crossing of a named stream.

How much notice does Texas811 need for a bore on Palmas Loop in Las Palmas?

For a bore on Palmas Loop, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. In Zapata County, we plan utility marking requests with Texas811, which describes the wait as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

How far is Las Palmas from the Yukon office, and does Zapata affect mobilization?

Las Palmas is 682 road miles and a 13.2 hour drive from our Yukon, Oklahoma main office, so we plan logistics accordingly. That distance can affect mobilization for a job near Zapata, 3.5 miles south of Las Palmas. We consider travel alongside the route, soil, crossings and equipment needs when planning the work.

What affects the price of a directional bore near Arroyo Molletes in Las Palmas?

The route length and pipe or conduit size matter, as do Comitas loamy fine sand, mapped weathered bedrock, utility exposures, pavement, pits and backfill. A route near Arroyo Molletes may need extra crossing planning. The 682 road miles from Yukon affect mobilization, and emergency or high profile work can add demands. We need the location and scope to assess those factors.

Where the Las Palmas facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Las Palmas

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Las Palmas, Texas

Type the address of your job in Las Palmas. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Las Palmas

Same county: San Ygnacio · New Falcon · Lopeño · Morales-Sanchez · Ramireno · Los Lobos. All counties: Texas county list.