trinityboringsolutions.com

Stockdale Texas Directional Boring: Alum Loamy Fine Sand, Clifton Branch, US 87

Quick Answer: US 87 is a major road crossing, and Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Stockdale, Texas. Stockdale is 484 road miles from our Yukon, Oklahoma main office, so routes near Main Street shape mobilization planning. Alum loamy fine sand covers much of the surface, but sandy clay is mapped at about 40 inches and can grip pipe during pullback. That ground calls for staged reaming near 8th Street.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Stockdale bores at a glance

  • Incorporated city in Wilson County, Texas. Population 1,488 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 484 miles, about 9.2 hours of driving.
  • Ground: Alum soil is mapped on 73 percent of the area, with sandy clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 21 percent of the area.
  • Highways inside the boundary: US 87, US 87 Business, Texas State Highway 97, Texas State Highway 123 and FM 1107. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Stockdale, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Stockdale near Clifton Branch?

For utility routes under US 87, Trinity Boring Solutions takes directional boring work in Stockdale, Wilson County. Stockdale’s 1,488 residents, per the Census Bureau Vintage 2024 estimate, shape how we plan work near Main Street. We install water, sewer, gas, electric conduit and fiber lines, including service routes along Main Street or connections crossing 8th Street where an open cut would disrupt pavement.

Our main office is in Yukon, Oklahoma, and Stockdale work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a Stockdale route near Clifton Branch is typically a shorter service or utility crossing, planned for its specific ground and access.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Stockdale’s Alum soil?

The USDA soil survey maps Alum across 73 percent of Stockdale, with Alum loamy fine sand making up 66 percent of the mapped area. That surface texture does not tell the whole story: at about 40 inches, sandy clay is mapped under 74 percent of the city, and average clay content there is 38 percent. Alum, Nocken, Crockett and Zavala are mapped soil patterns, not test borings, so we verify conditions before designing a Stockdale bore. For a route near Main Street, the clay layer can stick to a reamer and grip the pipe, so the drilling plan has to account for the change below the surface.

USDA soil survey, inside the Stockdale city limitsWhat is mapped
Soil series mappedAlum 73 percent, Nocken 10 percent, Crockett 8 percent, Zavala 5 percent and Rosanky 3 percent
Texture at the surfaceloamy fine sand 74 percent, fine sandy loam 16 percent and very stony fine sandy loam 10 percent
Texture about 40 inches downsandy clay 74 percent, bedrock 10 percent and sandy clay loam 7 percent
Engineering class about 40 inches downlean clay (CL) 85 percent and silty sand (SM) 5 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches21 percent of the area (0 percent hard rock, 21 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel18 percent of the area

The soil survey maps bedrock within 60 inches across 21 percent of Stockdale, including weathered bedrock; hard bedrock is not mapped in that depth. No seasonal water table is mapped within 60 inches, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across 18 percent, so the line owner should weigh casing and tracer wire materials. The Cenozoic Quartz Sand Decomposition Residuum and Lutetian Queen City Sand map units point to sand and clay conditions that can change along a bore near 8th Street.

How do crews handle sandy clay beneath Stockdale?

At about 40 inches, sandy clay is widely mapped in Stockdale, so we plan for sticky cuttings and pipe drag. A route near US 87 also calls for careful fluid control under pavement.

  1. Alum surface soils give way to sandy clay at about 40 inches across much of Stockdale, so we use thinner drilling fluid and ream in stages to manage sticky cuttings.
  2. On a route near US 87, we watch fluid returns and keep pressure controlled so the heavy clay does not lift pavement.
  3. Before drilling near a marked utility along 8th Street, we expose it with hydrovac potholing; paint shows its location, not its depth.
  4. We track the drill head from the surface and log depth and pitch as it advances near Main Street, then pull pipe while the reamed hole is ready.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a Stockdale line go under Main Street?

A Stockdale utility route may need to pass beneath US 87, US 87 Business, Texas State Highway 97, Texas State Highway 123 or FM 1107. A highway crossing changes the bore depth and permit plan. Main Street is the longest named street in the city at 1.46 miles, followed by 6th Street at 0.98 miles and 8th Street at 0.75 miles. Those streets can be considered for a bore route that keeps pavement intact while connecting utilities on either side.

CrossingTypeMapped extentWho has a say
US 87US highway2.5 roadway miles insideState highway office
US 87 BusinessUS highway1.2 roadway miles insideState highway office
Texas State Highway 97State highway2.5 roadway miles insideState highway office
Texas State Highway 123State highway2 roadway miles insideState highway office
FM 1107State highway0.4 roadway miles insideState highway office
Texas State Highway 119Highway nearby0.1 miles outsideState highway office
Clifton BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Stockdale or within one mile outside its limits, and no street and rail crossings are mapped in the city. No named stream runs inside the limits; Clifton Branch runs along or touches the boundary. The city has 2.92 miles of unnamed drainage, but no mapped street crossings of named streams. A drainage or Clifton Branch crossing needs a site specific route review, and mapped lakes and ponds are absent within one mile.

Who has to sign off on a Stockdale bore under US 87?

For electric or communication lines crossing US 87, the cover requirement is at least 60 inches below the lowest point of the crossed grade; along the right of way it is 48 inches. Water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer crossings need 60 inches. TxDOT’s San Antonio District reviews the utility owner’s application in RULIS. The utility owner files, and we prepare the bore plan and profile for work under its permit. For a US 87 crossing in Stockdale, we follow TxDOT’s requirement to bore or tunnel beneath existing highway pavement. Stockdale’s city streets belong to the city, and Clifton Branch is checked for federal jurisdiction during crossing planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities have lines in Stockdale and Wilson County?

The City of Stockdale public water system draws from groundwater wells and reports 742 service connections serving 1,201 people. That system gives a local point of reference when planning a water service near Main Street, but the line owner still needs confirmation for the address. Utilities reporting electric service in Wilson County are AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. We confirm the line owner before planning an electric conduit bore along 8th Street.

Line ownerWhat it isSourceSize
City of StockdalePublic water systemGroundwater wells742 connections, 1,201 people served
AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric CooperativeElectric utilities reporting service in Wilson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Stockdale’s median housing year at 1981; 18 percent of homes were built before 1960, 69 percent from 1960 to 1999 and 13 percent in 2000 or later. Older housing can mean replacement work, while newer construction can call for service extensions. Before a bore crosses a marked line near 6th Street, we expose it with hydrovac potholing because paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Stockdale in relation to Nixon and Floresville?

Stockdale is an incorporated city in Wilson County, at an elevation of 424 feet and covering 1.69 square miles. Its ZIP code is 78160. Nixon is 12.2 miles east, La Vernia is 12.7 miles northwest, and Poth is 13.3 miles southwest. Floresville, the county seat and nearest larger city, is 13.6 miles southwest. For work near US 87, the Yukon, Oklahoma main office is 484 road miles away, a 9.2 hour drive that affects crew mobilization and equipment planning.

Places near Stockdale

What would we bore near Stockdale’s 8th Street?

  • Highway crossing: A bore beneath US 87 can carry a utility under the pavement, with depth and the TxDOT permit plan set for the specific line.
  • Water service: A connection near Main Street can tie into the City of Stockdale system, which draws water from groundwater wells.
  • Street connection: A route near 8th Street can pass under pavement to avoid cutting the street surface for a utility line.
  • Fiber route: A conduit bore along 6th Street can connect service without opening a trench through the paved route.
  • Drainage crossing: A route near Clifton Branch needs a site review for channel conditions and possible federal jurisdiction during planning.
  • Electric conduit: A crossing near FM 1107 starts with confirming the line owner and locating marked utilities along the proposed route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Stockdale quote near East Street?

A map pin matters near East Street because a route on one side of a street or drainage can have different crossings from a route on the other. Send the Stockdale address or pin, what goes in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, access and nearby features before we prepare the scope.

In Stockdale, the mapped sandy clay matters first because sticky ground can add reaming and pullback work. The number of utilities to expose and cross also shapes the plan near Main Street or US 87. Pavement, concrete, pits, excavator time and sand backfill affect the work area. Bore length and pipe size matter, as do drainage crossings and mobilization from the 484 road miles between Stockdale and Yukon. The job details determine the price.

Questions people ask about boring in Stockdale

Does Trinity take directional boring jobs in Stockdale and Wilson County?

Yes, we take directional boring work in Stockdale and Wilson County. Our Yukon office coordinates with our own crews and partner contractor satellite yards, and Trinity remains the customer’s contact through the bore log. A route under US 87 or near Main Street is planned around its specific access, utilities and soil.

Who owns electric lines in Stockdale and Wilson County, and who confirms conduit specs?

The electric line owner depends on the Stockdale address. AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative report service in Wilson County. We confirm the owner for the route near 8th Street before planning conduit size and bore details; the county list does not identify a provider for every address.

Who controls Stockdale’s 8th Street, and can a bore avoid cutting it?

As Stockdale is incorporated in Wilson County, we treat Main Street and other city streets as municipal streets when planning a bore. A bore beneath 8th Street can leave the pavement uncut, with entry and exit pits placed in dirt where the site allows. The exact route and surface conditions determine whether that approach fits the job.

How old are Stockdale homes and buried lines near 6th Street?

Stockdale’s median housing year is 1981 in the American Community Survey 2019 to 2023 five year estimates. The housing age can help frame replacement versus new service work near 6th Street, but it does not establish the age of buried pipe. Near 6th Street, we expose marked utilities before drilling to confirm their position along the planned Stockdale bore.

What ground should I expect in Stockdale’s Alum soil?

The USDA soil survey maps Alum across 73 percent of Stockdale, with sandy clay mapped under 74 percent at about 40 inches. The clay can stick to the reamer and grip pipe during pullback, so a route near Main Street may need staged reaming and careful fluid control.

Is rock mapped within five feet of the surface in Stockdale?

The soil survey maps bedrock within 60 inches across 21 percent of Stockdale, all identified as weathered bedrock; hard bedrock is not mapped in that depth. Bedrock within 40 inches is mapped across 10 percent. A route near US 87 still needs field checks because map patterns do not show every bore location.

Can I reach someone after hours about an urgent Stockdale bore near 8th Street?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent bore near 8th Street, we can discuss the route, what line is going in and the site conditions before planning the response.

How much notice does Texas811 need for a Stockdale bore near Main Street?

Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For a bore near Main Street, worn or moved marks must be refreshed through Texas811 before work continues. If a Stockdale start slips more than 14 days past the original notice, we submit a new request to the TxDOT San Antonio District.

What affects the cost of a Stockdale directional bore under US 87?

The route scope determines the price, with Stockdale’s sandy clay, bore length and pipe or conduit size among the main factors. A US 87 crossing can add highway permit and cover planning. The count of utilities to expose, pavement, pits, equipment time, drainage crossings and the 484 road miles from Yukon also shape the job.

Where the Stockdale facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Stockdale

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Stockdale, Texas

Type the address of your job in Stockdale. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Stockdale

All counties: Texas county list.