trinityboringsolutions.com

Poth Texas Directional Boring: Floresville Soil, US 181, Sandy Clay Loam

Quick Answer: Floresville fine sandy loam covers 34 percent of Poth, and Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), to place lines beneath US 181 in Texas. Poth is 510 road miles from our Yukon, Oklahoma main office, and a route beside Storts Street needs mobilization planned with that distance in mind. At about 40 inches, sandy clay loam is the leading texture; its clay can cling to tooling and grip pipe. Staged reaming and fluid control help keep a US 181 crossing on line.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Poth bores at a glance

  • Incorporated city in Wilson County, Texas. Population 1,992 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 510 miles, about 9.7 hours of driving.
  • Ground: Floresville soil is mapped on 41 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 181, FM 541 and FM 427. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Poth, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near US 181 in Poth?

Trinity Boring Solutions takes directional boring work in Poth, Wilson County, including routes beside US 181 and FM 541. Floresville fine sandy loam is the leading surface map unit, and it can loosen around a bore if drilling fluid is overused. The Census Bureau Vintage 2024 estimate puts Poth at 1,992 residents. We install water, sewer, gas, electric conduit and fiber along streets such as Storts Street.

Our main office is in Yukon, Oklahoma, and Poth work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity’s longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. That reach is far beyond a typical Poth service crossing at US 181. Our family business began in 1965, and we have done directional boring since 1982; Poth is 510 road miles from our Yukon main office.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Floresville soil survey show about Poth ground?

The USDA soil survey maps Floresville soils across 41 percent of Poth, with Miguel at 25 percent and Clareville at 17 percent. Floresville fine sandy loam, on 1 to 3 percent slopes, is the largest mapped unit at 34 percent; Miguel fine sandy loam covers 23 percent. At about 40 inches below the surface, sandy clay loam is mapped under 63 percent of the area, while clay loam accounts for 24 percent. The survey also maps an average clay content of 35 percent at that depth. Floresville, Miguel, Clareville, and Elmendorf soil patterns are mapped references for Poth, not test borings, so we verify ground conditions before planning a bore.

USDA soil survey, inside the Poth city limitsWhat is mapped
Soil series mappedFloresville 41 percent, Miguel 25 percent, Clareville 17 percent, Elmendorf 9 percent and Degola 7 percent
Texture at the surfacefine sandy loam 66 percent and clay loam 34 percent
Texture about 40 inches downsandy clay loam 63 percent, clay loam 24 percent and clay 10 percent
Engineering class about 40 inches downlean clay (CL) 73 percent and fat clay (CH) 27 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel10 percent of the area

Bedrock is not mapped in the top five feet of Poth, and the USDA survey maps no seasonal water table within 60 inches. Flood prone soils cover 7 percent of the area, so a route near mapped drainage needs depth planning. High steel corrosion risk is mapped under 10 percent, a consideration for steel casing and tracer wire that the line owner should review. The geologic map shows the Yegua Formation of Bartonian age, described as sandstone and clay; deeper conditions can differ from the soil survey, so the bore plan must suit the route.

How do we bore through Poth sandy clay loam?

We plan a Poth bore around the mapped sandy clay loam and the sticky clay it contains at about 40 inches. Staged reaming and controlled fluid help keep the hole stable without lifting pavement along US 181.

  1. Fluid control: In Poth’s mapped sandy clay loam, we adjust drilling fluid to limit sticky buildup on the reamer and reduce the chance of clay gripping the pipe.
  2. Staged reaming: The 35 percent average clay content mapped at about 40 inches supports opening the bore in steps rather than pulling a large reamer through at once.
  3. Same day pullback: Where clay can swell around pipe, we plan to pull the line after opening the bore, including on routes near East Westmeyer.
  4. Utility exposure: Before drilling near a marked line on Storts Street, hydrovac potholing checks its depth because locate paint shows position, not how deep it lies.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Poth line have to go under US 181?

US 181 runs 2.5 mapped roadway miles inside Poth, alongside FM 541 at 1.9 miles and FM 427 at 0.7 miles. A bore beneath existing highway pavement is installed by boring or tunneling, which avoids opening the roadway. Rural highway crossings need to extend beneath all travel lanes. Storts Street is the longest named street at 2.03 miles; Railroad Street runs 1.02 miles, and East Westmeyer covers 0.93 miles. Those street lengths help identify routes where a bore can keep pavement intact.

CrossingTypeMapped extentWho has a say
US 181US highway2.5 roadway miles insideState highway office
FM 541State highway1.9 roadway miles insideState highway office
FM 427State highway0.7 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Poth or within one mile outside its limits, so no local track crossing is identified in the records. No mapped street and rail crossings are listed. Poth has no named streams inside or within one mile, and no mapped street crossings of named streams. The survey does map 4.78 miles of unnamed drainage within town limits, so a proposed route near a drainage channel needs a site specific check. With no lakes or ponds mapped within one mile of Poth, we still check the bore route along FM 541 for site conditions.

Who has to sign off on a Poth bore in Wilson County?

For work in the US 181, FM 541 or FM 427 right of way in Poth, TxDOT reviews the utility permit through its San Antonio District. The utility that owns the line files the application in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the utility owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with required cover set by line type and the permit. Poth is incorporated, so its city streets, including Storts Street, belong to the city. No railroad is mapped locally. If a route crosses a waterway, its possible Corps jurisdiction is checked during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Poth near the City of Poth water system?

The City of Poth public water system draws from groundwater wells and reports 998 service connections serving 2,994 people. For electric service in Wilson County, reporting utilities include AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. Those county listings do not identify the provider at every address, so we confirm the line owner before planning a conduit bore near the City of Poth system.

Line ownerWhat it isSourceSize
City of PothPublic water systemGroundwater wells998 connections, 2,994 people served
AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric CooperativeElectric utilities reporting service in Wilson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Poth’s median housing year at 1986; 27 percent of homes were built before 1960, 38 percent from 1960 to 1999, and 35 percent in 2000 or later. That mix can mean either replacement lines or new services along streets such as East Westmeyer. Before a drill approaches marked utilities, we use hydrovac potholing to expose them; near a water service or electric conduit, paint alone does not show burial depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Poth and nearby Falls City?

Poth is an incorporated town in Wilson County, at an elevation of 403 feet and with 3.17 square miles of land. ZIP code 78147 serves the town. Falls City is 7.2 miles southeast, and Floresville, the county seat and nearest larger city, is 7.3 miles northwest. Stockdale is 13.3 miles northeast. From our Yukon, Oklahoma yard, Poth is 510 road miles away and a 9.7 hour drive. That distance affects mobilization for work along US 181 and the local streets.

Places near Poth

Which jobs call for a bore near Poth’s Storts Street?

  • Highway crossing: A route under US 181 uses a bore or tunnel beneath existing pavement and extends under all travel lanes on a rural highway.
  • Water service: A connection near the City of Poth system can be planned around its groundwater wells and existing service lines.
  • Street conduit: Fiber or electric conduit beside Storts Street can pass below pavement rather than leave an open cut across the road.
  • Drainage crossing: The 4.78 miles of unnamed drainage mapped in Poth call for a route and depth check where a line meets a channel.
  • Neighborhood service: A new water or sewer line near East Westmeyer can use staged reaming in the area’s clay rich subsurface.
  • Utility replacement: Along Sunshine Drive, hydrovac potholing exposes marked lines before a replacement bore approaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Poth bore near Sunshine Drive?

For a Sunshine Drive estimate, send the address or map pin, what will go underground, the pipe or conduit size, the footage, and a sketch or plans if available. The most useful local detail is whether the route meets US 181 or one of Poth’s mapped drainage areas, since those can change the crossing plan.

A clear route beside Sunshine Drive with known utilities and no highway or drainage crossing is simpler to plan. The answer changes with bore length, pipe or conduit size, the sticky sandy clay loam, and the number of utilities that need exposure. Concrete or pavement, pits, excavator time and sand backfill also affect the scope. A US 181 crossing needs highway planning, while Poth’s 510 road miles from Yukon affect mobilization. High profile or emergency work can add demands.

Questions people ask about boring in Poth

Does Trinity Boring Solutions take directional boring work in Poth, Wilson County?

Yes. Trinity Boring Solutions takes work in Poth, Wilson County, with our own crews and vetted partner contractors working from satellite yards. You deal with Trinity from the first call through the bore log, whichever crew is at the site. Routes near US 181 can be planned for water, sewer, gas, electric conduit or fiber.

Will a bore in Poth hit rock below Floresville soil?

The soil survey does not map bedrock in Poth’s top five feet, but that does not establish what lies deeper. The geologic map identifies the Yegua Formation, a Bartonian unit described as sandstone and clay. Conditions along a specific route can vary, so a bore near Floresville soil is planned to suit the ground encountered.

Does the TxDOT San Antonio District approve a bore under US 181 in Poth?

TxDOT’s San Antonio District reviews a utility permit for work in the US 181 right of way in Poth. The utility that owns the line submits the application through RULIS, while we prepare the bore plan and profile. Highway pavement is crossed by boring or tunneling, rather than an open trench.

Who runs Poth’s public water system in Wilson County, and where does its water come from?

The City of Poth owns and runs the public water system, which uses groundwater wells. It reports 998 service connections and a population served of 2,994. For a bore near a water line on Storts Street, the route and existing buried utilities need checking before drilling.

Which electric company serves my Poth address in Wilson County?

Wilson County electric service is reported by AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. The list does not confirm who serves every Poth address. Before planning a conduit bore near US 181, we confirm the line owner and check the required conduit specifications with that owner.

Does Poth control East Westmeyer, and can a bore avoid cutting the street?

Poth is incorporated, so East Westmeyer is a city street. A directional bore can place a line below the street without cutting its pavement, subject to the route and any applicable approvals. The mapped street extends 0.93 miles within Poth, and utility locations along the proposed path need exposure before drilling nearby.

How far is Poth from Yukon, and does Floresville soil change mobilization?

Poth is 510 road miles and a 9.7 hour drive from our Yukon, Oklahoma yard. Floresville fine sandy loam is the largest mapped surface soil unit, while sandy clay loam is the leading texture at about 40 inches. Soil affects the bore plan; the distance affects mobilization.

How much notice does Texas811 need for a bore on Storts Street in Poth?

For a Storts Street excavation, Texas811 requires a locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If our US 181 bore schedule slips more than 14 days past the original notice, we make a new request. On Storts Street, we have worn or moved marks refreshed through Texas811 before we continue underground work.

What do US 181 and Poth’s Floresville soil series mean for bore costs?

The route and job scope determine the price. A US 181 crossing brings highway planning; bore length, pipe size, soil, pavement and the number of utilities to expose also matter. Poth’s sticky sandy clay loam can affect drilling steps, and its 510 road miles from Yukon affect mobilization. We also consider pits, backfill, excavator time and emergency timing.

Where the Poth facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Poth

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Poth, Texas

Type the address of your job in Poth. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Poth

Same county: La Vernia. All counties: Texas county list.