trinityboringsolutions.com

Floresville Texas Directional Boring: Sandy Clay Loam, Lodi Branch, US 181

Quick Answer: Floresville is an incorporated small city in Wilson County, and its city streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for routes near 10th Street. Floresville lies 504 road miles from our Yukon, Oklahoma main office, and US 181 shapes mobilization planning. The USDA soil survey maps sandy clay loam at 40 inches across 43% of the area, so sticky cuttings affect reaming. Near Lodi Branch, crews plan the bore profile around the channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Floresville bores at a glance

  • County seat of Wilson County, Texas. Population 8,738 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 504 miles, about 9.6 hours of driving.
  • Ground: Floresville soil is mapped on 28 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: US 181, US 181 Business, Texas State Highway 97 and FM 536. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Lodi Branch, San Antonio River, Seguin Branch and Pajarito Creek.
  • Public water: City of Floresville, groundwater wells.
  • Electric: City of Floresville municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can handle directional boring near Lodi Branch in Floresville?

Floresville is a small incorporated city in Wilson County, and the Census Bureau Vintage 2024 estimate puts its population at 8,738. We install water, sewer, gas, electric conduit and fiber, including service routes beneath 10th Street or toward the city’s mapped stream crossings where an open cut would interrupt the surface.

Our main office is in Yukon, Oklahoma, and Floresville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle 3/4 inch service lines through 48 inch casing, from short service bores near 4th Street to longer routes toward US 181. Our family business started in 1965 and has done directional boring since 1982; we account for 504 road miles from our Yukon main office when planning.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Floresville soil affect drilling in Floresville?

The USDA soil survey maps Floresville and Wilco soil series across 28% each of the city, with Miguel at 10%, Saspamco at 7% and Poth at 6%. At about 40 inches below the surface, sandy clay loam is mapped across 43% and fine sandy loam across 32%; average clay content there is 28%. We use Floresville, Wilco, Miguel, and Saspamco soil series as mapped guidance, not test borings, when planning underground routes. Sandy clay loam can cling to a reamer and hold an open hole, while loamy layers call for controlled fluid and attention to returns.

USDA soil survey, inside the Floresville city limitsWhat is mapped
Soil series mappedFloresville 28 percent, Wilco 28 percent, Miguel 10 percent, Saspamco 7 percent and Poth 6 percent
Texture at the surfacefine sandy loam 48 percent, loamy fine sand 34 percent and clay 5 percent
Texture about 40 inches downsandy clay loam 43 percent, fine sandy loam 32 percent and sandy clay 6 percent
Engineering class about 40 inches downlean clay (CL) 48 percent, clayey sand (SC) 35 percent and fat clay (CH) 12 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel6 percent of the area

The survey maps bedrock within 60 inches in 2% of Floresville, so shallow rock is limited in the mapped area, though deeper rock remains possible. No seasonal water table within 60 inches is mapped, but flood prone soils cover 10%, including ground to consider near Lodi Branch. High steel corrosion risk is mapped in 6%, a concern for steel casing and tracer wire. The Queen City Sand unit, mapped as Lutetian sandstone and siltstone, may bring firmer layers into a bore profile.

How do crews handle sandy clay loam when boring in Floresville?

For Floresville’s sandy clay loam and fine sandy loam, we use horizontal directional drilling (HDD) to keep the surface intact and adjust fluid and reaming to the mapped ground.

  1. Before drilling near a marked utility, we expose it by hydrovac; along 10th Street, surface paint shows position but does not establish depth.
  2. In sandy clay loam mapped at 40 inches, we use thinner fluid with polymer and open the hole in stages to limit sticky cuttings on the reamer.
  3. Where Wilco loamy fine sand is mapped, we build a bentonite wall and have the pipe ready before the final ream to limit collapse behind the bit.
  4. Near Lodi Branch, we watch fluid returns and pressure, track drill depth and pitch, and plan the profile with the channel crossing in view.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What does a bore have to cross near 10th Street in Floresville?

Floresville routes may need to pass beneath US 181, which has 8.6 mapped roadway miles in the city, or US 181 Business with 5.0 miles. Texas State Highway 97 has 4.8 miles and FM 536 has 1.7 miles inside the limits. Among local streets, 10th Street runs 6.05 miles, Standish Street 2.47 miles, 4th Street 2.26 miles and 3rd Street 2.02 miles. Boring beneath existing highway pavement avoids cutting through it, subject to the required TxDOT permit and plan.

CrossingTypeMapped extentWho has a say
US 181US highway8.6 roadway miles insideState highway office
US 181 BusinessUS highway5 roadway miles insideState highway office
Texas State Highway 97State highway4.8 roadway miles insideState highway office
FM 536State highway1.7 roadway miles insideState highway office
Lodi BranchStream4.47 channel miles insideChecked for Corps of Engineers jurisdiction
San Antonio RiverStream3.64 channel miles insideChecked for Corps of Engineers jurisdiction
Seguin BranchStream2.7 channel miles insideChecked for Corps of Engineers jurisdiction
Pajarito CreekStream1.55 channel miles insideChecked for Corps of Engineers jurisdiction
Kicaster CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Picosa CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Floresville or within 1 mile outside its limits, so no local track crossing is mapped. The San Antonio River runs 3.64 channel miles in the city, Lodi Branch 4.47, Seguin Branch 2.7 and Pajarito Creek 1.55. Public records map 23 street crossings of named streams. A route near Lodi Branch or the San Antonio River needs a profile that accounts for the channel; no lakes or ponds are mapped within 1 mile.

Who has to sign off on a US 181 bore in Floresville?

For a bore in the US 181 right of way in Floresville, TxDOT’s San Antonio District reviews the permit, and the utility owner submits the application through RULIS. The cover depth sets the profile: electric and communication lines need 60 inches at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. TxDOT rules call for boring or tunneling under existing highway pavement, with crossings encased. A bore on rural highway right of way extends beneath all travel lanes. For a San Antonio River or Lodi Branch crossing, planning checks for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Wilson County routes in Floresville?

The City of Floresville owns the public water system, which uses groundwater wells and reports 3,134 service connections serving 8,306 people. The city also owns its municipal electric system; EIA records report 17,361 customers. Before a conduit bore along 10th Street, we confirm which line owner’s specifications apply at that location rather than assume the same provider serves every address.

Line ownerWhat it isSourceSize
City of FloresvillePublic water systemGroundwater wells3,134 connections, 8,306 people served
City of Floresville municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration17,361 customers reported
AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric CooperativeElectric utilities reporting service in Wilson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We read the American Community Survey 2019 to 2023 five year estimates as placing Floresville’s median housing year at 1996; home age does not determine bore conditions. They estimate 15% of homes were built before 1960, 42% from 1960 to 1999 and 43% in 2000 or later. That mix can mean either replacing older buried lines or extending service to newer homes. Before drilling near a marked line under Standish Street, we expose it by hydrovac because paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Poth and nearby routes from Floresville?

Yes, we cover Floresville and nearby Wilson County routes, including work toward Poth, 7.3 miles southeast. Floresville is the county seat, sits at 417 feet and covers 7.69 square miles; its ZIP code is 78114. Elmendorf is 12.0 miles northwest, Stockdale 13.6 miles northeast, Falls City 14.3 miles southeast and La Vernia 14.5 miles north. Converse, the nearest larger city listed, is 26.6 miles north. Our Yukon, Oklahoma main office is 504 road miles away, a 9.6 hour drive, which factors into mobilization for a Floresville or Poth project.

Places near Floresville

What boring work comes up near Standish Street in Floresville?

  • Highway crossing: A route beneath US 181 needs a bore profile that meets TxDOT cover and pavement requirements.
  • Water service: A service near the City of Floresville water system can run beneath 4th Street without opening the street surface.
  • Fiber conduit: A fiber route along Standish Street can use a bore to pass beneath paved sections and avoid an open cut.
  • Creek crossing: A planned line near Lodi Branch needs a profile that accounts for the channel and a check for Corps jurisdiction.
  • Street crossing: A route beneath 10th Street can keep pavement intact while the crew tracks depth and pitch.
  • Rural service: A line extending toward Poth can be scoped around its route length, pipe size and any crossings.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near 3rd Street in Floresville?

For a Floresville quote, send the address or map pin, such as a location near 3rd Street, and identify what will go underground. Give us the pipe or conduit size and the footage. A sketch or plans showing the route help us see whether it approaches US 181, a stream or other mapped crossing.

A short route with clear plans and few conflicts near 3rd Street is simpler to scope than a long run through several crossings. Price depends on length, pipe or conduit size, soil, exposed utilities, pavement, creek crossings, pits, excavator time and sand backfill. Sandy clay loam can affect reaming, while a Lodi Branch crossing needs channel planning. Work near US 181 adds right of way permit planning, and mobilization also reflects the 504 road miles from Yukon.

Questions people ask about boring in Floresville

Does Trinity take directional boring work in Floresville and Wilson County, and who staffs it?

Yes, we take directional boring projects in Floresville and Wilson County. Our crews handle the work, and vetted drilling contractor partners can operate from satellite yards for the project. You work with Trinity through the bore log, including when a partner crew is on site near 10th Street or Lodi Branch.

Who runs the Floresville water system, and where does its water come from?

We account for the City of Floresville owning the public water system, whose source is groundwater wells, when planning San Antonio River bores. Public records list 3,134 service connections serving 8,306 people. A planned water line near 4th Street still needs its route and nearby utilities checked before drilling.

Who owns electric lines in Floresville and Wilson County, and who confirms conduit specs?

The City of Floresville owns its municipal electric system. EIA records report 17,361 customers for that system, but the line owner for a specific conduit route near US 181 should be confirmed before planning. The confirmed owner’s specifications guide the bore plan.

Does the city or county control Floresville streets like 4th Street, and must pavement be cut?

Floresville is incorporated, so its city streets, including 4th Street, belong to the city itself. Directional boring can pass beneath pavement without cutting the street surface. A route involving US 181 is different because TxDOT handles permits for state highway right of way.

How old are Floresville homes and buried lines near Standish Street, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Floresville at 1996, with 15% built before 1960. A replacement route near Standish Street may meet older utilities, so marked lines on the bore path are exposed before drilling close to them.

Are groundwater or flood prone soils a concern for bore pits near Lodi Branch in Floresville?

No seasonal water table within 60 inches is mapped in Floresville, but flood prone soils cover 10% of the area. Near Lodi Branch, the channel and local ground still matter when locating pits and setting the bore profile.

Does Trinity cover Poth and rural sites outside Floresville?

Yes, we take work in Texas beyond Floresville, including projects toward Poth, 7.3 miles southeast, and rural sites outside the city limits. The address, route and crossings determine the crew and mobilization plan from our Yukon main office.

How much 811 notice does a bore near 10th Street in Floresville need, and what happens to marks?

For a bore near 10th Street, Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the notice, make a new request. On Standish Street, we pause work when marks are worn or moved and have them refreshed through Texas811 before boring continues.

What affects directional boring costs under US 181 in Floresville?

For a possible FM 536 crossing, we set the price from the job scope and its defined boring requirements. For a US 181 route, factors include length, pipe or conduit size, soil, utility crossings, pavement and permit related planning. A nearby Lodi Branch crossing, pit and excavator needs, sand backfill, emergency timing and mobilization from Yukon can also affect the work.

Where the Floresville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Floresville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Floresville, Texas

Type the address of your job in Floresville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Floresville

All counties: Texas county list.