Amistad Texas Directional Boring: Zorra Soil, Salmon Peak Limestone and Grande
Quick Answer: At 549 road miles from our Yukon, Oklahoma, yard, we staff directional boring and horizontal directional drilling (HDD) in Amistad with our own crews and vetted partner crews for routes near Grande. Grande runs along or touches the mapped community boundary, so a nearby crossing needs site specific planning. The USDA soil survey maps Zorra soil across 32 percent of the area. Bedrock is typically 17 inches down, which can call for rock drilling rather than a soil bit.
Amistad bores at a glance
- Unincorporated community in Val Verde County, Texas. Population 24 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 549 miles, about 11.2 hours of driving.
- Ground: Zorra soil is mapped on 32 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 69 percent of the area.
- No state or US highway is mapped inside the boundary or within a mile and a half of it.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Amistad near Grande?
We take directional boring jobs in Amistad, Val Verde County, 549 road miles from our Yukon yard, with work staffed by our own crews and vetted partner crews for routes such as Holman Drive. The Census Bureau counted 24 residents in 2020, its published count for this unincorporated place. We can bore water, sewer, gas, electric conduit and fiber along Holman Drive or Amistad Avenue.
Our main office is in Yukon, Oklahoma, and Amistad work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line is at the small end of our work, while 48 inch casing and bores from 10 feet to 5,000 feet cover larger scopes. Our family business started in 1965 and has done directional boring since 1982, experience we bring to routes such as Rio Loop.

What is Amistad ground like around Zorra soil?
Amistad ground includes Zorra soil, mapped by the USDA soil survey across 32 percent of the area, and Olmos soil across 30 percent. The survey also maps Rock outcrop and Valverde soil. At about 40 inches below the surface, bedrock makes up 52 percent of the mapped texture and cemented material 30 percent; silty clay loam accounts for 16 percent. Average clay content at that depth is 32 percent, and sandy ground is not mapped there. These are mapped patterns, not test borings, so a route along Holman Drive still needs field checks.
| USDA soil survey, inside the Amistad mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Zorra 32 percent, Olmos 30 percent, Rock outcrop (miscellaneous area) 20 percent and Valverde 16 percent |
| Texture at the surface | very cobbly loam 30 percent, stony loam 30 percent and bedrock 20 percent |
| Texture about 40 inches down | bedrock 52 percent, cemented material 30 percent and silty clay loam 16 percent |
| Engineering class about 40 inches down | lean clay (CL) 16 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | 69 percent of the area (68 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 1 percent of the area |
The USDA soil survey puts typical bedrock depth at 17 inches and maps bedrock within 60 inches across 69 percent of Amistad; hard bedrock is mapped across 68 percent. That pattern, together with the Salmon Peak Limestone, a Cretaceous unit, can mean slower drilling with rock tooling and careful steering where soil meets rock. Seasonal water table and flood prone soils are not mapped within the stated depths. High steel corrosion risk is mapped across 1 percent, so the line owner should consider steel casing and tracer wire materials for work near Amistad Avenue.
How do we bore Amistad bedrock and soil?
For Amistad routes where the survey maps shallow bedrock, we choose the drill setup for the ground and keep the head tracked along streets such as Holman Drive. The mapped Salmon Peak Limestone can require rock tooling and slower progress.
- At Holman Drive, we use the survey’s shallow bedrock mapping to choose tooling and advance carefully where soil gives way to Salmon Peak Limestone.
- Because the survey maps average clay content of 32 percent at about 40 inches, we adjust drilling fluid and ream in stages to manage sticky cuttings.
- We track the drill head from the surface along Amistad Avenue and log its depth and pitch as the bore advances.
- Before drilling near lines along Rio Loop, we hydrovac pothole each marked utility; the locate paint shows its position, not its depth.

What might a bore cross in Amistad near Grande?
No highway is mapped inside or within 1.5 miles of the Amistad community boundary, so the named local streets are the likely route references. Holman Drive has 3.84 miles inside the community, Amistad Avenue has 0.39 miles, and Rio Loop has 0.36 miles. Box Canyon Drive adds another named route. A bore can place a line beneath pavement rather than cut across a street, but the entry and exit pits still need suitable space beside the route.
No railroad is mapped inside the community or within one mile outside it, and no street and rail crossings are mapped in Amistad. Grande runs along or touches the mapped boundary, but no street crossing of a named stream is mapped inside the community. The area has 1.99 miles of unnamed drainage, so the route still needs a look at drainage features even where no named channel crossing appears on the map. We account for Zorra soil series in Amistad, where no lakes or ponds are mapped within one mile.
Who approves an Amistad bore in Val Verde County?
Amistad has no city government, so its streets fall to Val Verde County unless a route reaches state right of way near Grande. No highway is mapped inside or within 1.5 miles of the community boundary. If a project does reach a state highway right of way, the line owner applies through TxDOT’s RULIS system and the TxDOT Laredo District reviews it; we prepare the bore plan and profile for that filing. For electric or communication lines crossing a highway, TxDOT calls for 60 inches of cover below the lowest grade point. A crossing near Grande is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utility owners serve Amistad in Val Verde County?
EPA drinking water records do not identify a provider for a specific Amistad address, so confirm the water provider with Val Verde County or the local water district before planning a bore near Holman Drive. Electric service reported in Val Verde County includes AEP Texas Central, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative. Those reports do not establish which company serves a particular address, so we confirm the line owner before planning electric conduit along Amistad Avenue.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative | Electric utilities reporting service in Val Verde County | EIA Form 861 | Confirm the line owner by address |
The ACS 2019 to 2023 five year estimates put Amistad’s median housing year at 1981, so we verify utilities before boring along Holman Drive. The survey estimates 14 percent of housing units were built before 1960, 64 percent from 1960 to 1999 and 22 percent in 2000 or later. A replacement bore along Rio Loop may need to work around older buried lines, while a new service on Holman Drive has its own route. Before the drill approaches, we hydrovac expose marked lines; paint shows position, not depth, including lines tied to the local water provider or electric owner.

Do you cover Amistad and nearby Lake View?
Amistad is an unincorporated community in Val Verde County, at an elevation of 1,184 feet and covering 1.51 square miles. The ZIP code is 78840. Box Canyon is 0.7 miles northwest, Lake View is 12.8 miles east, and Cienegas Terrace is 16.6 miles southeast. Del Rio, the county seat and nearest larger city, is 19.4 miles southeast. From our Yukon, Oklahoma, yard, Amistad is 549 road miles away and a 11.2 hour drive, which can affect mobilization for a job on Holman Drive or near Grande.
Places near Amistad
- Directional boring in Box Canyon: 0.7 miles northwest
- Lake View: 12.8 miles east
- Directional boring in Cienegas Terrace: 16.6 miles southeast
- Directional boring in Del Rio: 19.4 miles southeast
- Directional boring in Val Verde Park: 22 miles southeast
Which jobs call for a bore along Amistad Holman Drive?
- Water service: A service bore along Holman Drive can connect a property without opening the full paved route.
- Fiber drop: A fiber conduit bore along Amistad Avenue can pass beneath the street with pits kept in dirt beside the route.
- Sewer line: A sewer bore following Rio Loop needs a route planned around shallow bedrock mapped in the area.
- Electric conduit: Before a conduit bore near Box Canyon Drive, we verify the line owner and expose marked utilities.
- Drainage crossing: A line crossing one of Amistad’s unnamed drainage features needs a path that accounts for the channel and entry pits.
- Rock bore: Where a route meets Salmon Peak Limestone, a bore may need rock tooling and slower progress.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote an Amistad bore near Box Canyon Drive?
For a quote on Box Canyon Drive, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, especially if the work runs toward Holman Drive or crosses a drainage feature. Those details let us assess access and the likely bore path before we price the job.
The job scope determines the price: length, pipe or conduit size, soil and rock, utility crossings that need exposure, pavement, drainage crossings, pits, excavator time and backfill all matter. On an Amistad route, the mapped shallow bedrock and Salmon Peak Limestone can change drilling time, while Grande or unnamed drainage can add crossing planning. A paved stretch of Holman Drive also differs from an open route. The 549 road miles from Yukon affect mobilization, and high profile or emergency work can add demands.
Questions people ask about boring in Amistad
Does Trinity Boring Solutions take Amistad jobs in Val Verde County, and who does the work?
Yes, we take directional boring work in Amistad, Val Verde County. Our own crews and partner contractor crews we have vetted handle the work, and you deal with Trinity from the first call through the bore log. That applies whether the route is on Holman Drive or another local street.
Can a line be bored under Grande near Amistad?
A bore beneath Grande may be possible, but the route needs site review because the stream runs along or touches Amistad’s mapped boundary. We check whether the crossing is within U.S. Army Corps of Engineers jurisdiction during planning. No street crossing of a named stream is mapped inside the community.
Who owns electric lines in Amistad, Val Verde County, and who confirms conduit details?
Electric service reported in Val Verde County includes AEP Texas Central, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative. The report does not identify the owner at every Amistad address. We confirm the specific line owner and conduit requirements before planning a bore along Amistad Avenue.
Does Amistad control Rio Loop, and can a bore avoid cutting the street?
Amistad has no city government, so Val Verde County handles community streets such as Rio Loop. Directional boring can place a line beneath pavement instead of cutting a street, with entry and exit pits set beside the route where access allows. The mapped community has no highway inside or within 1.5 miles.
Do older homes and buried lines near Amistad Avenue affect replacement bores?
They can affect the route and the need to expose existing utilities. The American Community Survey 2019 to 2023 estimates put the median housing year at 1981, with 14 percent of housing units built before 1960. Along Amistad Avenue, we check marked lines before drilling near them rather than assuming their depth from surface marks.
What ground should I expect on an Amistad bore through Zorra soil?
The USDA soil survey maps Zorra soil across 32 percent of Amistad, and bedrock is the mapped texture across 52 percent at about 40 inches below the surface. Average clay content at that depth is 32 percent. Shallow rock can slow drilling and call for rock tooling, while clay needs controlled fluid and staged reaming.
Can I call Trinity after hours about an urgent bore near Amistad Rio Loop?
Yes, a person answers our phone 24 hours a day at (405) 409-7423. For an urgent job near Rio Loop, have the address or map pin and the immediate scope ready so we can discuss the route and what is going in the ground.
How early should I call Texas811 for a bore on Amistad Holman Drive, and what if marks move?
The locate request for a Holman Drive bore must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Amistad work, we file a new request with TxDOT Laredo District if the start slips more than 14 days past the original notice. In Val Verde County, we refresh worn or moved marks through Texas811 before work continues.
What affects the cost of a directional bore near Grande in Amistad?
The price reflects the job’s length and line size, ground conditions, utility exposures, pavement, drainage crossings, pits and equipment time. Near Grande, a stream crossing can add planning, while Amistad’s mapped shallow limestone can change drilling time. Mobilization also matters because the community is 549 road miles from our Yukon yard.
Where the Amistad facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Amistad
- U.S. Census Bureau, TIGER/Line 2024: Amistad boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Amistad population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Amistad housing units and year built
- Macrostrat geologic map compilation: map units under Amistad
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Val Verde County
- U.S. Geological Survey, Elevation Point Query Service: Amistad elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Amistad
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Amistad
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Amistad, Texas
Type the address of your job in Amistad. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Amistad
Same county: Laughlin AFB · Lake View. All counties: Texas county list.
