trinityboringsolutions.com

Burton Texas Directional Boring: Frelsburg Clay, US 290 and Indian Creek

Quick Answer: US 290 and Indian Creek are key crossings to plan around, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Burton, Texas. From our Yukon, Oklahoma main office, Burton is 414 road miles away, with Washington Street among the routes that shape access. Frelsburg clay covers much of town, and heavy clay can grip the reamer and pipe. We use staged reaming and watch fluid returns near Main Street pavement to keep the hole controlled.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Burton bores at a glance

  • Incorporated city in Washington County, Texas. Population 286 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 414 miles, about 8.2 hours of driving.
  • Ground: Frelsburg soil is mapped on 55 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 33 percent of the area.
  • Highways inside the boundary: US 290, FM 390 and FM 1697. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Indian Creek.
  • Public water: City of Burton, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Burton near Indian Creek?

We take directional boring work in Burton, where US 290 and Indian Creek are crossings to plan around. Burton is in Washington County, and the Census Bureau Vintage 2024 estimate puts its population at 286. For water, sewer, gas, electric conduit and fiber, we route lines beneath streets or access drives where the alignment and existing utilities allow.

Our main office is in Yukon, Oklahoma, and Burton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Burton work could mean a small service near Railroad Street or a long casing bore. Our Yukon main office is 414 road miles from Burton; as a family business started in 1965, we have done directional boring since 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Frelsburg soil affect drilling in Burton?

The USDA soil survey maps Frelsburg soil across 55 percent of Burton, including Frelsburg clay map units. Clay makes up 62 percent of the mapped surface texture, while clay loam accounts for 35 percent. At about 40 inches below the surface, clay is mapped across 62 percent of the city, with an average clay content of 51 percent at that depth. The survey also maps the CH soil classification there. These are mapped patterns, not test borings, so the route still needs site specific planning.

USDA soil survey, inside the Burton city limitsWhat is mapped
Soil series mappedFrelsburg 55 percent, Carbengle 27 percent, Bleiblerville 7 percent and Renish 7 percent
Texture at the surfaceclay 62 percent and clay loam 35 percent
Texture about 40 inches downclay 62 percent and bedrock 33 percent
Engineering class about 40 inches downfat clay (CH) 62 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inches33 percent of the area (7 percent hard rock, 27 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel62 percent of the area

The USDA soil survey maps bedrock within 60 inches across 33 percent of Burton, with a typical depth of 30 inches. Hard bedrock is mapped in 7 percent and weathered bedrock in 27 percent. The map shows no seasonal water table within 60 inches, but flood prone soils cover 2 percent. High steel corrosion risk is mapped across 62 percent, which matters for casing and tracer wire material choices. Oakville Sandstone, a Miocene unit of sandstone and clay, means ground conditions can shift between clay and sandstone along a bore.

How do crews handle clay in Burton?

Burton’s heavy clay can stick to the reamer and grip pipe, so we plan the bore in stages. Near Indian Creek or pavement, we also keep a close eye on fluid returns and the drill path.

  1. Frelsburg clay can ball on the reamer, so we thin the drilling fluid, use polymer and enlarge the Burton bore in stages.
  2. Because Burton’s heavy clay can hold pressure, we watch fluid returns near US 290 pavement and adjust the drilling approach to limit lift risk.
  3. Where the Oakville Sandstone map unit meets clay, we track depth and pitch closely because a soil to rock change can push the head off line.
  4. Before approaching marked utilities near Main Street, we hydrovac pothole each one; the surface marks show location, not burial depth.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads and creeks shape bores in Burton near US 290?

US 290 has 2.1 roadway miles mapped inside Burton, with FM 390 at 1.4 miles and FM 1697 at 0.8 miles. A route crossing one of these highways needs a bore plan that fits the road and its right of way. Washington Street is the longest named street at 1.1 miles, followed by Main Street at 0.92 miles, Railroad Street at 0.74 miles and Brazos Street at 0.68 miles. Those streets help define access and possible service routes.

CrossingTypeMapped extentWho has a say
US 290US highway2.1 roadway miles insideState highway office
FM 390State highway1.4 roadway miles insideState highway office
FM 1697State highway0.8 roadway miles insideState highway office
Indian CreekStream1.64 channel miles insideChecked for Corps of Engineers jurisdiction
Mayfield CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Kerr CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Camp CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Burton or within one mile outside its limits, and no street and rail crossings are mapped in the city. Indian Creek runs 1.64 channel miles within Burton, with three mapped street crossings of named streams. Mayfield Creek touches or follows the boundary, while Kerr Creek and Camp Creek are each 0.7 miles away. We plan around Indian Creek in Burton, where no lakes or ponds are mapped within one mile. Creek routes need careful depth planning and a jurisdiction check.

Who signs off on utility bores in Burton and Washington County?

Burton’s city streets belong to the city, while work in the right of way of US 290, FM 390 or FM 1697 needs a TxDOT utility permit. For electric and communication lines crossing a highway, the listed cover is 60 inches below the lowest crossed grade; water lines also need 60 inches, and pressurized sewer lines need 60 inches. The utility owner, not the drilling contractor, submits the application through TxDOT’s RULIS system for review by the Bryan District. We prepare the bore plan and profile for that filing. A creek crossing near Indian Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Burton and the City of Burton?

The City of Burton public water system uses groundwater wells and has 226 service connections serving 315 people. For an electric conduit bore along Main Street or another Burton route, we confirm the line owner before planning the alignment. Utilities reporting electric service in Washington County include Entergy Texas, City of Brenham, Bluebonnet Electric Cooperative and Fayette Electric Cooperative; that list does not identify the provider at every address.

Line ownerWhat it isSourceSize
City of BurtonPublic water systemGroundwater wells226 connections, 315 people served
Entergy Texas, City of Brenham, Bluebonnet Electric Cooperative and Fayette Electric CooperativeElectric utilities reporting service in Washington CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Burton’s median housing year at 1952, with 64 percent of homes built before 1960 and 36 percent from 1960 to 1999. Older housing near Main Street can mean replacement services need a careful route, though the building age does not establish the age of a buried line. We use hydrovac potholing to expose marked utilities before drilling near them, since paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Burton from Carmine and our Yukon yard?

Burton is an incorporated city in Washington County, with 1.18 square miles of land at an elevation of 445 feet and ZIP code 77835. Carmine is 5.8 miles southwest, and Round Top is 10.1 miles southwest; Somerville is 11.8 miles north. Brenham, the county seat and nearest larger city, is 12.5 miles east. Burton is 414 road miles and an 8.2 hour drive from our Yukon, Oklahoma yard, a distance that can affect mobilization for work along US 290 or Indian Creek.

Places near Burton

Which projects call for a bore near Burton’s Washington Street?

  • Water service: A service bore near the City of Burton system can connect a property without opening the full route along Railroad Street.
  • Highway crossing: A utility route beneath US 290 needs a bore plan that accounts for the highway right of way and required cover.
  • Fiber route: A conduit bore along Washington Street can pass beneath pavement while keeping the street surface uncut.
  • Creek crossing: A line near Indian Creek needs depth planning under the channel and a jurisdiction check during planning.
  • Replacement service: Older homes near Main Street may need a new buried service, with potholing to locate existing lines before drilling.
  • Electric conduit: Near Brazos Street, we confirm the electric line owner and expose marked utilities before the drill approaches.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to price a bore near Burton’s Brazos Street?

For a Burton quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us assess a route near Brazos Street, US 290 or Indian Creek. Those details show where access, pavement and existing utilities may affect the bore plan.

The price follows the specific Burton job. Frelsburg clay and the mapped sandstone affect drilling time and tooling; crossings of US 290, Indian Creek or buried utilities affect planning and exposure work. Pavement, concrete, pits, excavator time and sand backfill also change the scope. Mobilization reflects Burton’s 414 road miles from Yukon, while emergency or high profile work can add planning needs. The route, pipe size and length all matter.

Questions people ask about boring in Burton

Does Trinity take directional boring jobs in Burton and Washington County?

Yes, we take directional boring work in Burton and across Texas. Our own crews and vetted partner drilling contractors can staff Burton work, while you deal with Trinity from the first call through the bore log. That approach applies whether the route is near US 290 or Indian Creek.

Who controls Burton streets like Railroad Street, and can a bore avoid cutting it?

Burton’s city streets belong to the city, including Railroad Street. Directional boring can place a line beneath pavement without cutting a trench across the street, with entry and exit pits set in dirt where the route allows. Existing utilities still need to be located and exposed before drilling near them.

How old are buried services near Burton Main Street, and are replacement bores possible?

Public housing estimates put Burton’s median year built at 1952, but that does not establish the age of a buried service near Main Street. A replacement bore can follow a planned route around existing lines. We pothole marked utilities first so the drill path is based on exposed locations, not paint alone.

Does Frelsburg soil around Burton create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 62 percent of Burton, including areas mapped as Frelsburg soil. For boring work near US 290 in Burton, we follow the line owner’s choice of coating for steel casing or tracer wire. HDPE is not affected by that soil corrosion concern, and the intended line material depends on the project.

What ground does a bore pass through in Burton’s Frelsburg soil?

Frelsburg is the leading mapped soil series in Burton at 55 percent of the city. The USDA soil survey maps clay at about 40 inches across 62 percent of the area and identifies it as CH. That sticky ground can build up on a reamer, so staged enlargement and fluid control matter.

Will a bore in Burton encounter rock beneath the mapped soil?

Rock is mapped within 60 inches in 33 percent of Burton, with typical bedrock depth at 30 inches. The survey maps hard bedrock in 7 percent and weathered bedrock in 27 percent. Oakville Sandstone is a local Miocene unit, so a route may move from clay into sandstone.

Does Trinity cover Carmine and rural sites outside Burton?

We take work across Texas, including Burton, nearby Carmine and rural routes outside the city limits. Carmine is 5.8 miles southwest of Burton. Share the location and route so we can assess access, ground conditions and mobilization for the specific site.

How much notice does a Burton bore near Washington Street need, and what if marks fade?

For a bore near Washington Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Burton work under the TxDOT Bryan District, we make a new request if the start slips more than 14 days past the original notice. Worn or moved marks need refreshing through Texas811 before work continues.

What affects directional boring costs in Burton near US 290?

The Burton job details set the price: bore length, pipe or conduit size, Frelsburg clay or sandstone, utility crossings, pavement, creek conditions and pit work all matter. A route beneath US 290 may add planning needs, and mobilization reflects the 414 road miles from Yukon. Emergency or high profile work can also affect the scope.

Where the Burton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Burton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Burton, Texas

Type the address of your job in Burton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Burton

All counties: Texas county list.