trinityboringsolutions.com

Lyons Texas Directional Boring: Zulch Soil, FM 60 and Bell Creek

Quick Answer: For an FM 60 crossing in Lyons, we take directional boring, also called horizontal directional drilling (HDD), in Texas. Our Yukon, Oklahoma main office is 396 road miles away, and our own crews and vetted partner contractor yards staff work near Pecan Drive. Zulch fine sandy loam covers 23 percent of the mapped area. Clay makes up 46 percent of soil at about 40 inches and can cling to reamers.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lyons bores at a glance

  • Unincorporated community in Burleson County, Texas. Population 236 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 396 miles, about 7.7 hours of driving.
  • Ground: Zulch soil is mapped on 23 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 60 and Texas State Highway 36. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Bell Creek, Davidson Creek, Brushy Creek and Sandy Creek.
  • Public water: Lyons Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 60 in Lyons?

At 396 road miles from Yukon, Lyons work is staffed by our own crews and partner contractor crews from vetted satellite yards. The Census Bureau counted 236 people here in 2020; it does not publish yearly estimates for unincorporated places. In Burleson County, we install water, sewer, gas, electric conduit and fiber along routes such as FM 60, Texas State Highway 36 or Magnolia Drive, as the job calls for.

Our main office is in Yukon, Oklahoma, and Lyons work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters when planning near Lyons Water Supply Corporation lines or electric service reported in Burleson County. Our family business began in 1965 and has drilled directionally since 1982, experience we bring to routes near Bell Creek.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Zulch soil affect boring in Lyons?

The USDA soil survey maps Zulch fine sandy loam, with 1 to 3 percent slopes, across 23 percent of Lyons. Zilaboy clay, frequently flooded, also covers 23 percent, while Uhland fine sandy loam covers 16 percent. About 40 inches down, clay is mapped under 46 percent of the area, and the average clay content is 35 percent. That heavier layer can stick to a reamer and grip pipe. We plan fluid and reaming stages around the soil along streets such as Magnolia Drive, not just the surface texture.

USDA soil survey, inside the Lyons mapped community boundaryWhat is mapped
Soil series mappedZulch 23 percent, Zilaboy 23 percent, Uhland 16 percent, Robco 11 percent and Boonville 10 percent
Texture at the surfacefine sandy loam 61 percent, clay 23 percent and loamy fine sand 14 percent
Texture about 40 inches downclay 46 percent, fine sandy loam 16 percent and clay loam 16 percent
Engineering class about 40 inches downfat clay (CH) 52 percent and lean clay (CL) 44 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches60 percent of the area
Flood prone soils39 percent of the area
High corrosion risk for uncoated steel67 percent of the area

Bedrock is not mapped in the top five feet of Lyons, though the geologic map shows alluvium of Holocene age along streams and Middle Eocene sedimentary deposits. A bore near Bell Creek still needs a route and depth suited to the ground below. The USDA soil survey maps a seasonal water table within 60 inches across 60 percent of the area, so pits near creek ground may need pumping. Flood prone soils cover 39 percent, and high steel corrosion risk covers 67 percent; the line owner selects any coating for steel casing or tracer wire.

What does it take to bore Lyons clay?

On Lyons routes with heavy clay, we manage the drilling fluid and open the hole in stages. Around Bell Creek or FM 60, the route, cover and ground conditions shape the sequence.

  1. Clay control: Lyons soil maps show heavy clay at about 40 inches, so we use suitable fluid and staged reaming to manage sticky cuttings.
  2. Wet pits: A seasonal water table is mapped within 60 inches across 60 percent of Lyons, so we keep pits small and pump water as needed.
  3. Utility exposure: Before drilling near a marked line, we hydrovac pothole it; on a Magnolia Drive route, that means exposing each marked crossing first.
  4. Tracking: Near Bell Creek, a walkover locator follows the drill head, while depth and pitch are logged as the bore advances.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Lyons bore cross near Bell Creek?

FM 60 has 3.7 mapped roadway miles inside the Lyons community boundary, and Texas State Highway 36 has 0.8. A bore beneath either state road must be planned for the right of way and pavement. Magnolia Drive is the longest named street at 0.83 miles, followed by Laurel Lane at 0.62 and Southern Oaks at 0.49. Pecan Drive measures 0.35 miles. These streets give a route reference, but the actual path depends on the address and marked utilities.

CrossingTypeMapped extentWho has a say
FM 60State highway3.7 roadway miles insideState highway office
Texas State Highway 36State highway0.8 roadway miles insideState highway office
BNSF RailwayRailroad0.74 track miles insideThe railroad
Bell CreekStream4.23 channel miles insideChecked for Corps of Engineers jurisdiction
Davidson CreekStream2.11 channel miles insideChecked for Corps of Engineers jurisdiction
Brushy CreekStream0.69 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy CreekStream0.04 channel miles insideChecked for Corps of Engineers jurisdiction
Rough BayouStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Ryan CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 0.74 track miles in Lyons, and one street and rail crossing is mapped inside the community. Bell Creek runs 4.23 channel miles here; Davidson Creek runs 2.11, Brushy Creek 0.69 and Sandy Creek 0.04. Four street crossings of named streams are mapped. There are no lakes or ponds mapped within one mile. A bore can leave the track, road surface or creek bank uncut, with entry and exit pits placed in dirt.

Who approves a bore in Lyons and Burleson County?

Lyons has no city government, so streets and permits fall to the county or state rather than a city office. FM 60 and Texas State Highway 36 are state roads; a utility crossing their right of way needs a TxDOT utility permit reviewed by the Bryan District. Cover depends on the line: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches at a crossing. The utility owner files in RULIS, while we prepare the bore plan and profile. A BNSF Railway crossing also needs an agreement with the railroad, and Bell Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Lyons Water Supply Corporation?

Lyons Water Supply Corporation is the local government owned public water system. Its groundwater wells serve 600 people through 217 service connections, so a water or sewer route near FM 60 needs careful utility coordination. The county electric service reports list Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative. We confirm the line owner before planning a conduit bore because those reports do not identify the provider at every Lyons address.

Line ownerWhat it isSourceSize
Lyons Water Supply CorporationPublic water systemGroundwater wells217 connections, 600 people served
Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric CooperativeElectric utilities reporting service in Burleson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Lyons at 1994. The survey estimates 70 percent of homes were built from 1960 to 1999 and 30 percent in 2000 or later. A project on Pecan Drive might replace an existing line or serve newer construction, and those scopes call for different tie ins. We hydrovac pothole every marked utility on the route before drilling near it; for example, a proposed line under Magnolia Drive needs exposed crossings before the drill approaches.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Lyons and Somerville?

Lyons is an unincorporated community in Burleson County, with an elevation of 232 feet and a mapped area of 2.96 square miles. Its ZIP codes are 77879, 77863 and 77836. Somerville is 4.4 miles south, Beaver Creek is 3.3 miles northwest, Snook is 6.9 miles northeast and Tunis is 9.3 miles north. Caldwell, the county seat, is 12.7 miles northwest; College Station is 18.9 miles northeast. From our Yukon yard, the drive is 396 road miles and 7.7 hours, which affects mobilization for work near FM 60.

Places near Lyons

What kinds of bores come up near Southern Oaks in Lyons?

  • Highway crossing: A route under FM 60 needs a bore planned for state right of way, pavement and the applicable cover depth.
  • Water service: A connection near Lyons Water Supply Corporation lines starts with locating and exposing utilities along streets such as Pecan Drive.
  • Fiber conduit: A conduit route beside Magnolia Drive needs the line owner confirmed and marked crossings exposed before drilling.
  • Creek crossing: Bell Creek calls for a route beneath the channel, with jurisdiction checked during planning and pits kept off the bank where possible.
  • Rail crossing: A bore beneath the BNSF Railway track needs railroad coordination for the crossing conditions and a route that avoids cutting the track.
  • Neighborhood service: A line along Southern Oaks can serve a property while leaving the street surface intact, subject to the marked utilities and access.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Pecan Drive in Lyons?

For a quote near Pecan Drive, tell us the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show whether the route reaches FM 60, crosses a marked utility or approaches Bell Creek. Those details let us review access and the likely bore path before setting the scope.

The 396 road miles from Yukon set the mobilization picture for a Lyons job. Zulch soil and the heavy clay mapped at about 40 inches affect fluid and reaming plans. A route near FM 60 or BNSF Railway can add permit coordination and crossing requirements; Bell Creek can add creek planning. Pipe size and length, exposed utilities, pavement, pits, excavator time and sand backfill also shape the work. High profile or emergency work can require a different plan.

Questions people ask about boring in Lyons

Does Trinity Boring Solutions take jobs in Lyons, Burleson County, and who does the work?

Yes. We take directional boring work in Lyons, with the job staffed by our own crews or crews from vetted partner contractor yards. Our Yukon main office is 396 road miles away. You work with Trinity from the first call through the bore log, including work near FM 60.

What ground should I expect for a bore through Zulch soil in Lyons?

The USDA soil survey maps Zulch fine sandy loam across 23 percent of Lyons, but clay is mapped under 46 percent of the area at about 40 inches. That deeper clay can stick to the reamer and grip pipe. We set the fluid and reaming plan for the route, rather than treating the map as a test boring.

Will a bore in Lyons hit rock near Bell Creek?

The soil survey does not map bedrock in the top five feet of Lyons, but that does not rule out rock deeper down. The geologic map shows Holocene alluvium along streams and Middle Eocene sedimentary deposits. Near Bell Creek, we plan from the route and site conditions instead of assuming the full bore is rock free.

Who approves a bore under FM 60 in Lyons?

TxDOT reviews utility work in FM 60 right of way through its Bryan District. The utility owner submits the application in RULIS, and we provide the bore plan and profile for the filing. Required cover varies by line type, so the plan for a water, electric or communication crossing under FM 60 must match the applicable rule.

What does a Lyons bore beneath BNSF Railway require?

A crossing beneath the BNSF Railway track needs an agreement with the railroad that owns it. That agreement sets the crossing conditions, including casing, depth and flagging. Lyons has 0.74 track miles mapped, so a proposed route needs to be checked against the track alignment before the bore plan is set.

Can a line be bored under Bell Creek in Lyons?

A line can be planned beneath Bell Creek without cutting the creek bank, with pits placed in dirt on either side. During planning, the creek crossing is checked for U.S. Army Corps of Engineers jurisdiction. Bell Creek runs 4.23 channel miles inside Lyons, so the exact route and depth matter.

What bore sizes and lengths can you handle for a Lyons job near Pecan Drive?

We handle lines from 3/4 inch service sizes up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near Pecan Drive still needs a site specific review of the entry and exit pits, soil and crossings. Send the size and footage along with the location.

How much notice does Texas811 need for a bore near Magnolia Drive in Lyons?

The locate request must go to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Magnolia Drive bore, the marks need refreshing through Texas811 if they wear off or move. A new notice is needed if the start slips more than 14 days past the original notice.

What affects the cost of directional boring under FM 60 in Lyons?

The job scope drives the price. The 396 road miles from Yukon affect mobilization, while the clay mapped below Lyons can affect drilling time and fluid management. Pipe size and footage, exposed utilities, pavement, pits and creek or railroad crossings also matter. A bore beneath FM 60 adds state permit planning to the scope.

Where the Lyons facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lyons

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lyons, Texas

Type the address of your job in Lyons. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lyons

Same county: Caldwell · Cade Lakes · Deanville. All counties: Texas county list.