Gilmer Texas Directional Boring: Bowie Fine Sandy Loam, US 271 and Brooks Creek
Quick Answer: We handle directional boring, also called horizontal directional drilling (HDD), for routes beneath US 271 and other Gilmer crossings. Wood Street and Montgomery Street are among the longest local streets within 65.26 road miles. Gilmer is 316 road miles from our Yukon, Oklahoma main office, so distance is part of planning a job near Brooks Creek. Bowie soil and sandy clay loam mapped below the surface can make hole support and fluid control important.
Gilmer bores at a glance
- County seat of Upshur County, Texas. Population 5,207 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 316 miles, about 6.2 hours of driving.
- Ground: Bowie soil is mapped on 41 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 13 percent of the area.
- Highways inside the boundary: US 271, Texas State Highway 155, Texas State Highway 154, FM 49 and Texas State Highway 300. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: Union Pacific, with 13 mapped street and rail crossings.
- Named streams inside the boundary: Brooks Creek and Tanyard Creek.
- Public water: City of Gilmer, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Wood Street in Gilmer?
Trinity Boring Solutions takes directional boring work in Gilmer, the Upshur County seat, where Wood Street and US 271 are local route considerations. For underground planning in Gilmer, we use the Census Bureau Vintage 2024 estimate of 5,207 residents as local context. We install water, sewer, gas, electric conduit and fiber, including service lines that need to reach properties along Bradford Street or cross a Gilmer street without cutting its surface.
Our main office is in Yukon, Oklahoma, and Gilmer work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle bores from 3/4 inch service lines to 48 inch casing, from a short connection near Montgomery Street to a longer route beneath US 271. Our family business began in 1965, and we have done directional boring since 1982, including planning underground work in Gilmer.

What is Bowie soil like to bore in Gilmer?
The USDA soil survey maps Bowie as 41 percent of Gilmer’s soil series, with Bowie fine sandy loam mapped across 18 percent of the area. Surface textures are mostly fine sandy loam, while sandy clay loam accounts for 76 percent of mapped soil texture at about 40 inches below the surface. The survey also maps clay at that depth across 9 percent. These are mapped patterns, not test borings, so a route near Wood Street still needs field checks as drilling proceeds.
| USDA soil survey, inside the Gilmer city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 41 percent, Lilbert 22 percent, Cuthbert 13 percent, Kirvin 11 percent and Sacul 5 percent |
| Texture at the surface | fine sandy loam 62 percent, loamy fine sand 22 percent and very fine sandy loam 14 percent |
| Texture about 40 inches down | sandy clay loam 76 percent, clay 9 percent and fine sandy loam 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 52 percent, clayey sand (SC) 30 percent and fat clay (CH) 9 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 13 percent of the area (0 percent hard rock, 13 percent weathered rock) |
| Seasonal water table within 60 inches | 54 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 60 percent of the area |
The survey maps weathered bedrock within 60 inches across 13 percent of Gilmer, with typical bedrock depth at 45 inches; that can slow a bore or change tool choice. Seasonal water tables are mapped within 60 inches across 54 percent, so pits near Brooks Creek may need pumping. Flood prone soils cover 3 percent. For Gilmer projects, we account for high steel corrosion risk mapped across 60 percent when planning underground work. Cenozoic quartz sand decomposition residuum and Eocene Queen City Sand are mapped locally, so conditions can shift along a route.
How is a bore run through sandy clay loam in Gilmer?
In Gilmer, sandy clay loam below the surface and fine sandy loam near the surface call for controlled fluid and staged reaming. Near Brooks Creek or Wood Street, we track the drill head from above and adjust to observed ground conditions.
- Bowie fine sandy loam is common in Gilmer, so we use staged reaming and support the hole as the bit advances rather than opening the full bore at once.
- With sandy clay loam mapped at about 40 inches, we watch the returns and use fluid suited to the changing ground along a route near Wood Street.
- Where seasonal water tables are mapped near Brooks Creek, we plan workable pits and pump collected water as needed to keep the launch and receiving areas usable.
- We hydrovac expose marked utilities along a Montgomery Street bore path, then track the head from the surface and log its depth and pitch.

Where does a line have to go under US 271 in Gilmer?
A bore in Gilmer can pass beneath US 271, Texas State Highway 155 or Texas State Highway 154, all of which run inside the city limits. US 271 has 6.2 mapped roadway miles in town. Wood Street, Montgomery Street and Bradford Street are the three longest named local streets, so a route may also need to avoid cutting a street or driveway. The mapped street lengths and highway routes help identify possible crossings, but the exact bore path depends on the job address and site plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 271 | US highway | 6.2 roadway miles inside | State highway office |
| Texas State Highway 155 | State highway | 3.8 roadway miles inside | State highway office |
| Texas State Highway 154 | State highway | 1.6 roadway miles inside | State highway office |
| FM 49 | State highway | 0.3 roadway miles inside | State highway office |
| Texas State Highway 300 | State highway | 0.3 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.35 track miles inside | The railroad |
| Brooks Creek | Stream | 0.76 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Tanyard Creek | Stream | 0.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sugar Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Little Cypress Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Tullos Lake | Lake or pond | 19 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.35 track miles inside Gilmer, with 13 mapped street and rail crossings in the city. A crossing of its Pine Bluff Subdivision needs an agreement from the railroad that owns the track. Brooks Creek runs 0.76 channel miles in town, and five mapped street crossings intersect named streams. Tanyard Creek also runs through the city. Tullos Lake is within one mile but outside the limits, so it may matter only if a proposed route reaches that area.
Do I need a permit to bore in Upshur County near Gilmer?
For a bore in Gilmer, the line owner, not the driller, submits a TxDOT utility permit application through RULIS when work uses state highway right of way. That applies to routes under US 271, Texas State Highway 155 and other listed state roads; TxDOT’s Atlanta District reviews the application. We provide the bore plan and profile for the owner’s filing and work under its permit. TxDOT cover requirements vary by line type, and its permit can set a different depth. A crossing of the Union Pacific track needs the railroad’s agreement, while Brooks Creek is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Gilmer system?
The City of Gilmer public water system draws from groundwater wells and lists 2,705 service connections serving 8,115 people. Those records make nearby water infrastructure a key locate and potholing concern before a bore near Wood Street or Montgomery Street. Southwestern Electric Power, Upshur Rural Electric Cooperative and Wood County Electric Cooperative report electric service in Upshur County. We confirm the line owner for a specific Gilmer address before planning an electric conduit route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Gilmer | Public water system | Groundwater wells | 2,705 connections, 8,115 people served |
| Southwestern Electric Power, Upshur Rural Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Upshur County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Gilmer’s median housing year at 1973; 37 percent of homes were built before 1960, while 12 percent date to 2000 or later. A replacement bore near Bradford Street may pass existing services whose positions need checking, while a new service still needs a clear path. We hydrovac expose marked lines on the bore path before drilling near them, because locate paint shows position, not depth.

Do you cover Gilmer and nearby Union Grove?
We serve Gilmer and nearby Union Grove, which is 11.0 miles south, along with other places in the area. Gilmer is the Upshur County seat, covers 3.79 square miles and sits at an elevation of 361 feet. ZIP codes 75644 and 75645 serve the city. East Mountain is 11.3 miles southeast, and Longview is 18.2 miles southeast. From our Yukon yard, Gilmer is 316 road miles and a 6.2 hour drive, so mobilization distance is part of planning a route near US 271.
Places near Gilmer
- Directional boring in Union Grove: 11 miles south
- Directional boring in East Mountain: 11.3 miles southeast
- Directional boring in Warren City: 12.7 miles south
- Directional boring in Gladewater: 13.1 miles south
- Directional boring in Clarksville City: 14 miles south
- Directional boring in Longview: 18.2 miles southeast
Which jobs call for a bore near Montgomery Street in Gilmer?
- Highway crossing: A route beneath US 271 uses a bore rather than cutting through existing highway pavement, with the crossing plan matched to the line.
- Water service: A connection near Wood Street can extend from the City of Gilmer groundwater system toward a property without opening the full street.
- Fiber route: Conduit along Montgomery Street can connect service points while keeping the street surface intact.
- Creek crossing: A line near Brooks Creek can pass below the channel, with the route planned around the creek and checked for federal jurisdiction.
- Rail crossing: A utility route across Union Pacific track needs the railroad’s agreement before the crossing plan is set.
- Electric conduit: Near Bradford Street, the line owner is confirmed for the address before we plan a conduit bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near Brooks Creek in Gilmer?
For a Gilmer quote, start with an address or map pin, such as a location near Brooks Creek or Montgomery Street. In Gilmer, what will go underground, the pipe or conduit size and the footage? A sketch or plans help us see how the route relates to US 271, nearby streets and the proposed pits.
A straightforward run along Wood Street with clear access is easier to plan than one with several crossings. Price reflects bore length and pipe size, mapped soil and rock conditions, utilities to expose, pavement, creek or drainage crossings, pits and equipment time. For a route near Brooks Creek, creek conditions can affect planning; a crossing of US 271 or Union Pacific track adds coordination. Gilmer’s 316 road miles from Yukon also affects mobilization.
Questions people ask about boring in Gilmer
Does Trinity take directional boring work in Upshur County near Gilmer, and who staffs it?
Yes, Trinity Boring Solutions takes directional boring work in Gilmer and across Upshur County. Our own crews or crews from partner drilling contractors we have vetted handle the field work, while you work with Trinity from the first call through the bore log. That applies to routes near US 271 as well as local streets.
Who is responsible for Bradford Street in Gilmer, and can a bore avoid cutting it?
Bradford Street is within incorporated Gilmer, so it is a city street. Directional boring can place a line beneath the street rather than cutting its surface, subject to the route and site conditions. For a route that also uses US 271 right of way, TxDOT’s Atlanta District reviews the utility permit application.
Can a replacement bore near Montgomery Street in Gilmer avoid older buried lines?
A bore can avoid open trenching, but the exact path depends on locating and exposing existing lines first. The American Community Survey 2019 to 2023 estimates give Gilmer a median housing year of 1973, with 37 percent of homes built before 1960. Near Montgomery Street, we use hydrovac potholing to check marked utilities before drilling close to them.
Do groundwater or wet ground near Brooks Creek affect bore pits in Gilmer?
They can affect pit planning near Brooks Creek. The USDA soil survey maps seasonal water tables within 60 inches across 54 percent of Gilmer, while flood prone soils cover 3 percent. We account for possible water in the pits and plan a creek route to stay below the channel; the crossing is checked for federal jurisdiction during planning.
Does Bowie soil in Gilmer corrode steel, and what pipe should I use?
Gilmer’s mapped soils show high steel corrosion risk across 60 percent of the area, so the line owner should consider casing and tracer wire materials. Bowie soil is the most common mapped series, but the specific route still matters. The owner selects any protective coating, while HDPE is not affected by soil corrosion.
What ground does a bore pass through in Gilmer’s Bowie soil?
Gilmer’s USDA soil survey maps Bowie across 41 percent of the soil series, with sandy clay loam covering 76 percent of mapped texture at about 40 inches below the surface. Fine sandy loam is the most common surface texture. These are survey patterns rather than test borings, so conditions along Cherokee Trace need field confirmation.
What bore sizes and lengths can Trinity handle near Cherokee Trace in Gilmer?
For underground work serving Gilmer, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. That range can fit a short service connection or a longer route near Cherokee Trace, depending on the alignment, ground and crossing conditions at the Gilmer site.
How early should I request a locate for Wood Street in Gilmer, and what if marks move?
For a bore near Wood Street, submit the Texas811 locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays. It cannot be submitted earlier than 14 days before the planned start. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the price of directional boring near US 271 in Gilmer?
The price depends on the Gilmer job’s length, line size, soil and rock, and how many utilities need exposure. Pavement or concrete, pits, creek crossings and equipment time also matter. A route beneath US 271 needs highway planning, while a Union Pacific crossing adds railroad coordination. Mobilization reflects the 316 road miles from Yukon.
Where the Gilmer facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gilmer
- U.S. Census Bureau, TIGER/Line 2024: Gilmer boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Gilmer
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gilmer housing units and year built
- Macrostrat geologic map compilation: map units under Gilmer
- U.S. EPA Safe Drinking Water Information System: public water systems serving Gilmer
- U.S. Department of Transportation, North American Rail Network: track owners in Upshur County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Upshur County
- U.S. Geological Survey, Elevation Point Query Service: Gilmer elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gilmer
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gilmer
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gilmer, Texas
Type the address of your job in Gilmer. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gilmer
Same county: Big Sandy · Ore City. All counties: Texas county list.
