Union Grove Texas Directional Boring: Lilbert Loamy Fine Sand, Moody Creek and US 271
Quick Answer: Can you get a line under Point Pleasant Road without cutting it? Yes, Trinity Boring Solutions performs directional boring, also called horizontal directional drilling (HDD), in Union Grove, Texas. Our Yukon, Oklahoma main office is 328 road miles from Union Grove, and US 271 is one of the routes we plan around. The USDA soil survey maps sandy clay loam below much of Union Grove, so we plan staged reaming to help keep the hole stable.
Union Grove bores at a glance
- Incorporated city in Upshur County, Texas. Population 476 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 328 miles, about 6.4 hours of driving.
- Ground: Lilbert soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 271 and FM 1844. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Moody Creek, Whetstone Branch and Victory Branch.
- Public water: Union Grove Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Moody Creek in Union Grove?
Trinity Boring Solutions handles directional boring in Union Grove, Upshur County, for lines routed beneath Point Pleasant Road or near Moody Creek. Can you get a water, sewer, gas, electric conduit or fiber line beneath a road without cutting it? The Census Bureau Vintage 2024 estimate puts Union Grove at 476 people, and we plan the route around the actual street and utility crossings.
Our main office is in Yukon, Oklahoma, and Union Grove work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have provided directional boring since 1982, planning around the 328 road miles from Yukon main office. That is more than four decades of boring experience to apply to Lilbert soil and routes around Moody Creek.

What does the soil survey show about Lilbert soil in Union Grove?
The USDA soil survey maps Lilbert loamy fine sand across 30% of Union Grove, with Bowie fine sandy loam at 28% and Cuthbert fine sandy loam at 25%. Fine sandy loam makes up 58% of mapped surface texture, while loamy fine sand makes up 40%. At about 40 inches below the surface, 92% of the mapped texture is sandy clay loam. We use Lilbert and Bowie mapped soil patterns as planning context, not as test borings for work in Union Grove. The mix means a bore can move from sandier surface material into firmer, clay bearing ground.
| USDA soil survey, inside the Union Grove city limits | What is mapped |
|---|---|
| Soil series mapped | Lilbert 30 percent, Bowie 28 percent, Cuthbert 25 percent, Tenaha 7 percent and Iulus 3 percent |
| Texture at the surface | fine sandy loam 58 percent and loamy fine sand 40 percent |
| Texture about 40 inches down | sandy clay loam 92 percent and fine sandy loam 4 percent |
| Engineering class about 40 inches down | clayey sand (SC) 57 percent, lean clay (CL) 36 percent and silty clayey sand (SC SM) 4 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 34 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 31 percent of the area |
Bedrock is not mapped in the top five feet, which does not rule out deeper rock. Seasonal water tables are mapped within 60 inches across 34% of the area and within 40 inches across 5%, so pits near Moody Creek may need pumping. Flood prone soils cover 3%. High steel corrosion risk is mapped across 31%, a reason for the line owner to consider casing and tracer wire materials; HDPE is not affected by soil corrosion, so we consider Lilbert, Bowie, Cuthbert, and Tenaha when planning Union Grove bores. The geologic map unit is Queen City Sand, of Eocene age, described as sand and clay.
How do we bore Union Grove’s sandy clay loam along US 271?
Union Grove’s sandy surface soils and sandy clay loam below call for a bore plan that manages both the open hole and the wet spots. We match the reaming and fluid approach to the route, including Moody Creek crossings.
- Lilbert loamy fine sand covers 30% of Union Grove, so we stage the reaming and keep the pipe ready before the final pass through loose ground.
- Sandy clay loam is mapped below much of Union Grove at about 40 inches, so we adjust drilling fluid and ream in stages as the bore advances.
- Seasonal water tables are mapped within 60 inches across 34% of the area, so pits near Moody Creek may need to stay small and be pumped.
- Before drilling near a marked line on Point Pleasant Road, we hydrovac pothole it; a walkover locator tracks the head and logs depth and pitch.

What is in the way of a new line near Point Pleasant Road in Union Grove?
US 271 and FM 1844 run through Union Grove, with 0.8 mapped roadway miles of US 271 and 2.3 of FM 1844 inside the city. Point Pleasant Road is the longest named street at 1.49 miles within city limits. White Oak Road measures 0.89 miles, and Union Grove Road measures 0.81 miles. Those routes put street and highway access into the bore plan. A line beneath existing highway pavement needs boring or tunneling rather than an open trench.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 271 | US highway | 0.8 roadway miles inside | State highway office |
| FM 1844 | State highway | 2.3 roadway miles inside | State highway office |
| Moody Creek | Stream | 0.39 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Whetstone Branch | Stream | 0.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Victory Branch | Stream | 0.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Buckholts Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Clear Branch | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Mc Kinley Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Mc Coy Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Wood Lake | Lake or pond | 16 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Union Grove or within 1 mile outside its limits, and none is mapped at a street and rail crossing. Moody Creek has 0.39 channel miles in the city; Whetstone Branch has 0.19 and Victory Branch has 0.08. Two street crossings of named streams are mapped, though the records do not identify which streams or streets. Wood Lake is a 16 acre lake outside the city and within 1 mile, so a proposed water crossing there needs review during planning.
Do I need a permit for a bore under US 271 in Union Grove?
The line owner, not the driller, applies for a TxDOT utility permit when work uses the US 271 or FM 1844 right of way. The TxDOT Atlanta District reviews the application in RULIS, and we give the line owner a bore plan and profile to support it. For an existing highway crossing, TxDOT rules set minimum cover of 60 inches for electric, communication and water lines, and 60 inches for pressurized sewer. Union Grove is incorporated, so its city streets, including Point Pleasant Road, belong to the city. A Moody Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near Union Grove Water Supply Corporation in Union Grove?
Union Grove Water Supply Corporation is a local government water system using groundwater wells; records list 1,066 service connections and a population served of 3,198. Southwestern Electric Power, Upshur Rural Electric Cooperative and Wood County Electric Cooperative report electric service in Upshur County. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near the water system.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Union Grove Water Supply Corporation | Public water system | Groundwater wells | 1,066 connections, 3,198 people served |
| Southwestern Electric Power, Upshur Rural Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Upshur County | EIA Form 861 | Confirm the line owner by address |
Union Grove’s median housing year is 2002 in the American Community Survey 2019 to 2023 five year estimates, a context we consider when planning underground work. The survey estimates 3% of housing was built before 1960, 40% from 1960 to 1999 and 57% in 2000 or later. That mix can mean a replacement bore for an older line or a route for a newer service. Along White Oak Road, we hydrovac marked utilities on the bore path before drilling near them; paint shows position, not depth.

Where is Union Grove in relation to Gladewater?
Union Grove is in Upshur County, at an elevation of 393 feet, and covers 0.93 square miles. Its ZIP code is 75647. Warren City is 1.7 miles south, Gladewater is 2.9 miles southwest, Clarksville City is 3.0 miles southeast, East Mountain is 3.4 miles east and White Oak is 4.7 miles southeast. Gilmer, the county seat, is 11.0 miles north. Union Grove is 328 road miles and a 6.4 hour drive from our Yukon, Oklahoma main office, which affects mobilization for work near FM 1844.
Places near Union Grove
- Directional boring in Warren City: 1.7 miles south
- Directional boring in Gladewater: 2.9 miles southwest
- Directional boring in Clarksville City: 3 miles southeast
- Directional boring in East Mountain: 3.4 miles east
- Directional boring in White Oak: 4.7 miles southeast
What would we bore near White Oak Road in Union Grove?
- Highway crossing: A proposed line beneath US 271 needs a bore under existing pavement, with the line owner handling the TxDOT right of way permit.
- Water service: A route for Union Grove Water Supply Corporation can use a bore to avoid opening a street or driveway along its planned path.
- Creek crossing: A proposed route beneath Moody Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Street conduit: A fiber or electric conduit bore along Point Pleasant Road can pass beneath pavement without an open cut across the street.
- Replacement bore: A line replacement near White Oak Road can be routed beneath the road while marked utilities are exposed before drilling nearby.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Willow Oak Road in Union Grove?
A map pin matters near Willow Oak Road because the exact route can change which street, utility or drainage feature a bore must pass. For a US 271 crossing, send us the address or pin, what is going in the ground, pipe or conduit size, and footage for TxDOT Atlanta District permit planning. A sketch or plans help us see the route and any nearby crossings.
In Union Grove, the mapped sandy clay loam and loamy fine sand matter because they affect hole stability and reaming. Creek or drainage crossings, including a route near Moody Creek, add depth and planning needs. The number of utilities to expose, pavement near US 271, pipe size, bore length, pits and excavator time also shape the job. Mobilization matters too: the Yukon main office is 328 road miles away.
Questions people ask about boring in Union Grove
Does Trinity take directional boring work in Union Grove and Upshur County, and who crews it?
Yes, we take directional boring work in Union Grove and across Texas. Our own crews and partner drilling contractors Trinity has personally vetted staff the work from satellite yards, while our Yukon, Oklahoma office remains your contact. For a route near Moody Creek, you deal with Trinity from the first call through the bore log.
Who is responsible for Union Grove Road in Union Grove, and can you bore without cutting it?
Union Grove Road is a city street because Union Grove is incorporated. A directional bore can pass beneath the street without an open cut, with entry and exit pits placed in dirt where the route allows. The street measures 0.81 miles within the city, and the exact crossing location guides the plan.
Do older buried lines near White Oak Road in Union Grove need replacement bores?
A replacement bore may suit an older line near White Oak Road, but the route and existing utilities need checking first. The American Community Survey 2019 to 2023 five year estimates put the median housing year at 2002 and estimate 3% of housing was built before 1960. We expose marked lines before drilling nearby.
Can groundwater or flood prone soil affect bore pits near Moody Creek in Union Grove?
It can. The USDA soil survey maps seasonal water tables within 60 inches across 34% of Union Grove and flood prone soils across 3%. Near Moody Creek, those conditions can affect pit setup and water management. A proposed creek crossing also gets checked for U.S. Army Corps of Engineers jurisdiction during planning.
Does Lilbert soil in Union Grove corrode steel, and what pipe should I use?
The soil survey maps high steel corrosion risk across 31% of Union Grove, so the line owner should consider casing and tracer wire materials for a route through Lilbert soil. HDPE is not affected by soil corrosion, so we consider Lilbert, Bowie, Cuthbert, and Tenaha when planning Union Grove bores. The right choice depends on the line design and what the owner specifies.
What ground will a bore pass through in Lilbert soil in Union Grove?
The USDA soil survey maps Lilbert loamy fine sand across 30% of Union Grove, while sandy clay loam makes up 92% of mapped texture at about 40 inches below the surface. We treat mapped soil patterns as references, not test borings, when planning bore routes along Point Pleasant Road. The change from loose surface material to clay bearing ground can affect reaming and fluid choices.
How early should I call 811 for a bore on Point Pleasant Road in Union Grove?
The person arranging the bore should contact Texas811 with the planned path along Point Pleasant Road at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
Does the distance from Gladewater to Union Grove change the job mobilization?
Gladewater is 2.9 miles southwest of Union Grove, while our Yukon, Oklahoma main office is 328 road miles away. That distance can affect mobilization for a bore near FM 1844. The route, soil and required equipment also shape the plan, so the job location matters when we review the scope.
What affects the price of a directional bore near US 271 in Union Grove?
The mapped sandy clay loam, loose surface soils and the number of utilities to expose all affect a bore near US 271. So do highway pavement, any creek or drainage crossing, pipe size, length, pits and excavator time. A route requiring special planning or emergency response changes the work, as does mobilization from Yukon.
Where the Union Grove facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Union Grove
- U.S. Census Bureau, TIGER/Line 2024: Union Grove boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Union Grove
- U.S. Census Bureau, American Community Survey 2019 to 2023: Union Grove housing units and year built
- Macrostrat geologic map compilation: map units under Union Grove
- U.S. EPA Safe Drinking Water Information System: public water systems serving Union Grove
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Upshur County
- U.S. Geological Survey, Elevation Point Query Service: Union Grove elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Union Grove
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Union Grove
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Union Grove, Texas
Type the address of your job in Union Grove. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Union Grove
Same county: Gilmer · Big Sandy · Ore City. All counties: Texas county list.
