Oklaunion Texas Directional Boring: Rotan Clay Loam, US 287, BNSF Railway
Quick Answer: US 287 is a main route constraint, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Oklaunion, Texas. From our Yukon, Oklahoma main office, the 164 road miles matter for work near Loop 404 because mobilization is part of the job. Rotan soil is the main mapped series at 87 percent, with clay that can cling to the reamer. At about 40 inches, the USDA soil survey maps clay across 91 percent of the area, so staged reaming and fluid control help manage sticky cuttings.
Oklaunion bores at a glance
- Unincorporated community in Wilbarger County, Texas. Population 88 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 164 miles, about 3.4 hours of driving.
- Ground: Rotan soil is mapped on 87 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: US 287, US 183, US 70, Loop 145 and Loop 404. State permit office: TxDOT Wichita Falls District.
- Railroad track inside the boundary: BNSF Railway and BNSF Railway (line shown as out of service), with 2 mapped street and rail crossings.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Loop 404 in Oklaunion?
Trinity Boring Solutions takes directional boring work in Oklaunion, where US 287 and BNSF Railway are mapped crossing constraints. The Census Bureau counted 88 people here in the 2020 Census; it does not publish yearly estimates for unincorporated places. Along Loop 404 and King Street, our crews can install water, sewer, gas, electric conduit or fiber by bore, keeping the surface route uncut.
Our main office is in Yukon, Oklahoma, and Oklaunion work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service line near Loop 404 or a large casing route under US 287, our capacity runs from 3/4 inch service lines to 48 inch casing. Our family business began in 1965, and we have done directional boring since 1982, including planning for Oklaunion.

What ground should a bore expect in Oklaunion Rotan soil?
Rotan soil is the dominant mapped series in Oklaunion, covering 87 percent of the area in the USDA soil survey. Rotan clay loam map units account for 51 percent at 0 to 1 percent slopes and 36 percent at 1 to 3 percent slopes. Clay loam is mapped at the surface across 98 percent of the area. At about 40 inches below the surface, clay is mapped across 91 percent, with an average clay content of 40 percent. For Oklaunion, we use mapped soil patterns as a planning reference, not as test borings that establish conditions along a bore route. For a route near King Street, expect sticky cuttings that can collect on the reamer.
| USDA soil survey, inside the Oklaunion mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Rotan 87 percent, Clairemont 7 percent and Vernon 3 percent |
| Texture at the surface | clay loam 98 percent |
| Texture about 40 inches down | clay 91 percent and silty clay loam 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 95 percent and fat clay (CH) 3 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 91 percent of the area |
Bedrock is mapped within 60 inches in 3 percent of Oklaunion, so it is not mapped in the top five feet across most of the area. The geologic map shows Quaternary Quartz Sand Disintegration Residuum and Early Permian sedimentary material; a bore may meet sandstone as it goes deeper. Seasonal water table soils are not mapped, while flood prone soils cover 7 percent. High steel corrosion risk is mapped across 91 percent, so the line owner should weigh casing and tracer wire materials; HDPE is not affected by that soil concern.
How do we drill Oklaunion clay near King Street?
For Oklaunion’s Rotan clay loam, we use staged reaming and control fluid so sticky cuttings do not load the tool or lift pavement near King Street.
- On a route through Rotan clay loam, we use thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup on the reamer.
- Because clay can swell around pipe, we keep the product ready and pull it the same day the hole is opened near King Street.
- Along pavement near US 287, we keep fluid pressure low and watch the returns so pressure does not lift the surface.
- We pothole marked utilities along a Loop 404 bore before approaching them, then track the drill head from the surface and log depth and pitch.

Where might a line go under US 287 in Oklaunion?
US 287, US 183 and US 70 each have 1.1 mapped roadway miles inside the Oklaunion community boundary. Loop 145 accounts for 0.7 mapped miles, while Loop 404 has 0.1 as a highway and 0.76 as a named street. King Street runs 0.62 miles inside the community, and 1st Street runs 0.37 miles. These routes shape access and bore alignment; a crossing under existing highway pavement is bored or tunneled rather than open cut.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 287 | US highway | 1.1 roadway miles inside | State highway office |
| US 183 | US highway | 1.1 roadway miles inside | State highway office |
| US 70 | US highway | 1.1 roadway miles inside | State highway office |
| Loop 145 | State highway | 0.7 roadway miles inside | State highway office |
| Loop 404 | State highway | 0.1 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 1.21 track miles inside | The railroad |
| BNSF Railway (line shown as out of service) | Railroad | 0.2 track miles inside | The railroad |
| Dugan Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 1.21 track miles mapped in Oklaunion, plus 0.2 miles shown as out of service. Public mapping records two street and rail crossings in the community, so a route near King Street may need to account for the track. No named stream crosses the mapped community, and no street crossing of a named stream is mapped there. Dugan Creek is 0.4 miles outside the boundary, with 0.4 miles of unnamed drainage mapped inside; those features matter if the planned route reaches a channel.
Who approves a bore in Oklaunion and Wilbarger County?
Oklaunion is an unincorporated community with no city government, so a street permit is handled by the county or state with jurisdiction over that route. For work in the right of way of US 287, US 183, US 70, Loop 145 or Loop 404, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Wichita Falls District reviews it. The owner submits the application, and we prepare the bore plan and profile for its filing. A BNSF Railway crossing needs an agreement with the railroad owner. If a water line route reaches Dugan Creek, planning checks for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve addresses in Oklaunion and Wilbarger County?
The water provider for a specific Oklaunion address must be confirmed with the city, county or local water district before a bore is planned; public records do not match a provider to this place. A line along US 287 still needs that address check before we plan a water service. AEP Texas North, Oncor Electric Delivery Company, Southwestern Public Service and Tri-County Electric Cooperative report electric service in Wilbarger County. We confirm the line owner for the route before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North, Oncor Electric Delivery Company, Southwestern Public Service and Tri-County Electric Cooperative | Electric utilities reporting service in Wilbarger County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Oklaunion’s median housing year at 1968; 16 percent of homes were built before 1960 and 84 percent from 1960 to 1999. On King Street, we read that signal as possible replacement work as well as service connections, not confirmation of underground conditions. Before the drill nears a marked utility, we hydrovac pothole it to expose its position and depth; paint alone does not show depth.

What is near Oklaunion and Vernon for a bore project?
Oklaunion is in Wilbarger County, at an elevation of 1,223 feet, and the mapped community covers 0.45 square miles. ZIP code 76373 covers the area. Vernon, the county seat and nearest larger city, is 9.0 miles west. Harrold is 7.7 miles southeast, Lockett is 13.5 miles west, Electra is 14.5 miles southeast and Chillicothe is 22.9 miles northwest. Our Yukon yard is 164 road miles away, a 3.4 hour drive, which affects mobilization for work near US 287.
Places near Oklaunion
- Directional boring in Harrold: 7.7 miles southeast
- Directional boring in Vernon: 9 miles west
- Directional boring in Lockett: 13.5 miles west
- Directional boring in Electra: 14.5 miles southeast
- Directional boring in Chillicothe: 22.9 miles northwest
Which jobs call for a bore near King Street in Oklaunion?
- Highway crossing: A route under US 287 can keep a water or fiber line beneath the road surface instead of cutting through pavement.
- Water service: A service near King Street needs its address specific water provider confirmed before the bore route is set.
- Fiber conduit: A conduit route along Loop 404 can pass beneath pavement and driveways, with marked utilities exposed before drilling near them.
- Rail crossing: A line beneath BNSF Railway needs an agreement with the railroad owner before the crossing plan is settled.
- Drainage crossing: A route near Dugan Creek needs channel conditions considered, with jurisdiction checked during planning if the bore crosses water.
- Electric conduit: Before a bore near US 183, we confirm the line owner because several utilities report electric service in Wilbarger County.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Oklaunion work near BNSF Railway?
For a quote near BNSF Railway or Loop 404, start with the address or map pin. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help us see whether the route crosses US 287, the track or another marked utility.
The job scope sets the price, starting with mobilization for the 164 road miles from Yukon. Rotan clay loam can add reaming and fluid control work, while a crossing under US 287 or BNSF Railway brings its own route and coordination needs. We also account for pipe or conduit size, bore length, utilities to expose, pavement, drainage crossings, pits, excavator time and sand backfill. When high profile or emergency work affects our schedule in Oklaunion, we may need to change the planned bore sequence.
Questions people ask about boring in Oklaunion
Does Trinity take directional boring work in Oklaunion, Wilbarger County?
Yes. Trinity Boring Solutions takes directional boring work in Oklaunion, and Trinity remains your contact from the first call through the bore log. Our own crews and partner drilling contractors Trinity has personally vetted can staff the work. For a route near US 287, we plan around the highway and the specific site.
Does Rotan soil in Oklaunion corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 91 percent of Oklaunion. Rotan clay loam is common, but the line owner chooses materials for casing and tracer wire. HDPE is not affected by the mapped soil corrosion concern. A bore near King Street should use the material selected for the line and its purpose.
What does a bore go through in Oklaunion Rotan soil?
The USDA soil survey maps Rotan soil across 87 percent of Oklaunion, mostly as clay loam. At about 40 inches down, clay is mapped across 91 percent of the area. That sticky ground can ball up on the reamer, so a route near Loop 404 may call for staged reaming and careful fluid control.
Will a bore in Oklaunion hit rock?
Bedrock is mapped within 60 inches across 3 percent of Oklaunion, so it is not mapped in the top five feet across most of the area. The geologic map names Quaternary Quartz Sand Disintegration Residuum and Early Permian sedimentary material. A deeper route near US 287 could encounter rock, so the map is not a substitute for site conditions.
Who approves our planned bore under US 287 in Oklaunion?
For a bore in the US 287 right of way, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Wichita Falls District reviews the permit. We prepare the bore plan and profile for the owner’s application. A proposed route near Loop 145 follows the same state highway permit process.
What does a bore under BNSF Railway in Oklaunion need?
A crossing beneath BNSF Railway needs an agreement from the railroad that owns the track. That agreement governs casing, depth and flagging for a US 287 crossing in Oklaunion, so we plan the bore to those conditions. With 1.21 track miles mapped in Oklaunion, the rail crossing must be part of the route plan rather than treated like an ordinary street crossing.
Can I reach Trinity after hours about an urgent bore near King Street in Oklaunion?
Yes. Trinity answers the phone 24 hours a day at (405) 409-7423 for urgent work near King Street or elsewhere in Oklaunion. The call can establish what is needed and where, including whether the job involves US 287, BNSF Railway or a marked utility.
How much 811 notice do I need for a bore near Loop 404 in Oklaunion?
Texas811 needs a locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Paint near Loop 404 shows position, not depth. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring under US 287 in Oklaunion?
The job scope determines the price, including the 164 road miles from Yukon, Rotan clay loam, bore length and pipe size. A US 287 or BNSF Railway crossing can add planning and coordination, while pavement, utilities to expose, drainage, pits and excavator time also affect the work. Emergency or high profile work can change the plan.
Where the Oklaunion facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Oklaunion
- U.S. Census Bureau, TIGER/Line 2024: Oklaunion boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Oklaunion population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Oklaunion housing units and year built
- Macrostrat geologic map compilation: map units under Oklaunion
- U.S. Department of Transportation, North American Rail Network: track owners in Wilbarger County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Wilbarger County
- U.S. Geological Survey, Elevation Point Query Service: Oklaunion elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Oklaunion
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Oklaunion
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Oklaunion, Texas
Type the address of your job in Oklaunion. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Oklaunion
All counties: Texas county list.
