trinityboringsolutions.com

Shamrock Texas Directional Boring: Carey Silt Loam, Interstate 40 and Roundup Creek

Quick Answer: Carey silt loam is common in Shamrock, where its fine material can soften with excess drilling fluid. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes crossing Interstate 40 and US 83. Shamrock is 164 road miles from our Yukon, Oklahoma main office, with Main Street among the roads a bore may need to pass beneath. The mapped loam at about 40 inches can drill readily, but careful fluid control helps protect pavement.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Shamrock bores at a glance

  • Incorporated city in Wheeler County, Texas. Population 1,717 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 164 miles, about 3.1 hours of driving.
  • Ground: Carey soil is mapped on 51 percent of the area, with loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 54 percent of the area.
  • Highways inside the boundary: Interstate 40, US 83, Texas State Highway 66 and FM 2033. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Shamrock Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Shamrock, Wheeler County?

Carey silt loam is widespread in Shamrock, where Trinity Boring Solutions takes directional boring work in Wheeler County. The Census Bureau Vintage 2024 estimate puts Shamrock at 1,717 residents, while we assess underground crossings in Wheeler County on their own merits. Along routes such as Main Street and US 83, we install water, sewer, gas, electric conduit and fiber, with the bore planned around the route and existing lines.

Our main office is in Yukon, Oklahoma, and Shamrock work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; for Shamrock, Interstate 40 would shape crossing planning. For a route near Interstate 40, our equipment range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Shamrock Carey soil like to bore through?

The USDA soil survey maps Carey silt loam across 51 percent of Shamrock, with Lutie soil also common at 35 percent. At about 40 inches below the surface, mapped texture is loam across 51 percent and silty clay loam across 38 percent; very fine sandy loam accounts for 6 percent. Average clay content at that depth is 21 percent. Carey, Lutie, Paducah, and Obaro soil patterns inform our review, but we treat these mapped patterns as references, not test borings. The loam and silty clay loam can drill quickly, but excess fluid can soften the ground and make steering less firm near Main Street pavement.

USDA soil survey, inside the Shamrock city limitsWhat is mapped
Soil series mappedCarey 51 percent, Lutie 35 percent, Paducah 8 percent, Obaro 3 percent and Dodson 3 percent
Texture at the surfacesilt loam 89 percent and loam 11 percent
Texture about 40 inches downloam 51 percent, silty clay loam 38 percent and very fine sandy loam 6 percent
Engineering class about 40 inches downlean clay (CL) 97 percent
Average clay content about 40 inches down21 percent
Bedrock mapped within 60 inches54 percent of the area (0 percent hard rock, 54 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey maps weathered bedrock within five feet across 54 percent of Shamrock, while hard bedrock is not mapped in that depth range; bedrock is mapped within 40 inches across 3 percent. That can slow a bore where weathered rock is encountered. Seasonal water tables and flood prone soils are not mapped, and high steel corrosion risk is not mapped. The geologic map names the Blaine Formation, of Roadian age, with mudstone, gypsum, dolomite and sandstone; actual conditions can vary along a route such as US 83.

How do we bore through Shamrock loam?

In Shamrock, mapped loam and silty clay loam call for controlled fluid use, while the Carey silt loam pattern helps guide planning rather than replace a site check.

  1. Carey silt loam covers much of Shamrock, so we use controlled fluid and staged reaming to keep the hole stable without washing soft ground loose.
  2. Because loam and silty clay loam are mapped around 40 inches down, we watch steering response and keep fluid pressure low near Main Street pavement.
  3. Where the Blaine Formation’s mapped weathered rock occurs, we allow for slower drilling and track depth and pitch as the bore advances.
  4. Before approaching marked lines near Shamrock Municipal Water System routes, we hydrovac pothole them; a surface mark shows location, not burial depth.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What could a new line cross in Shamrock near Main Street?

A Shamrock bore may need to pass beneath Interstate 40, US 83, Texas State Highway 66 or FM 2033, all mapped within the city limits. Main Street, Madden Street and Wall Street are among the longest named local streets, so a route may need to preserve their pavement and access. Directional boring places the line below the surface rather than cutting across a road. The exact path and road ownership determine which approvals apply.

CrossingTypeMapped extentWho has a say
Interstate 40Interstate0.9 roadway miles insideState highway office
US 83US highway2.7 roadway miles insideState highway office
Texas State Highway 66State highway0.9 roadway miles insideState highway office
FM 2033State highway1.3 roadway miles insideState highway office
Roundup CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Shamrock or within one mile of its limits, so there is no mapped track crossing to plan around. No named stream crosses the city limits either. Roundup Creek is mapped 0.2 miles outside them, and the city has 0.69 miles of unnamed drainage; a route near either needs site specific review. No street crossing of a named stream is mapped in the city, and no lake or pond is mapped within one mile.

Who approves a Shamrock bore beneath Interstate 40?

TxDOT Childress District reviews utility permits for Interstate 40, US 83, Texas State Highway 66 and FM 2033 in Shamrock. The utility that owns the proposed line submits the application through TxDOT RULIS; we prepare its bore plan and profile and work under the permit issued to that owner. Existing highway pavement is bored or tunneled beneath, and the permit sets the required cover. Shamrock’s city streets are city owned. A possible crossing near Roundup Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the Shamrock Municipal Water System?

Shamrock Municipal Water System is locally owned and draws water from groundwater wells; it serves 2,311 people through 1,267 service connections. Near its lines, we hydrovac pothole marked utilities before drilling close, since paint shows position rather than depth. Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric Cooperative report electric service in Wheeler County. We confirm the line owner for a specific electric conduit route before planning the bore.

Line ownerWhat it isSourceSize
Shamrock Municipal Water SystemPublic water systemGroundwater wells1,267 connections, 2,311 people served
Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and North Plains Electric CooperativeElectric utilities reporting service in Wheeler CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Shamrock’s median housing year at 1957; 53 percent of housing was built before 1960, 35 percent from 1960 to 1999 and 12 percent in 2000 or later. That mix can mean work for replacement lines as well as new services along streets such as Houston Street. We expose marked lines by hydrovac before the drill approaches, including routes near the water system.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Shamrock, including Samnorwood?

Shamrock is an incorporated city in Wheeler County, covering 2.05 square miles at an elevation of 2,332 feet. ZIP code 79079 serves Shamrock, while we plan underground boring near Main Street by the route, not the mailing code. Samnorwood is 11.6 miles south, Wheeler is 15.7 miles north, and McLean is 20.0 miles west; Wheeler is the county seat. From our Yukon yard, Shamrock is 164 road miles and a 3.1 hour drive away. That distance helps set mobilization for work along Interstate 40 or out toward Samnorwood.

Places near Shamrock

What bores could serve Shamrock along Madden Street?

  • Highway crossing: A line beneath Interstate 40 needs a planned bore profile and coordination with the TxDOT permit held by the utility owner.
  • Water service: A connection near Shamrock Municipal Water System can use a bore route that avoids cutting streets such as Madden Street.
  • Fiber route: Fiber along US 83 can pass below road pavement, with marked utilities exposed before drilling near them.
  • Street crossing: A service route beneath Main Street can keep the roadway surface intact while the line passes below.
  • Creek area: A route near Roundup Creek needs site review and a check for U.S. Army Corps of Engineers jurisdiction during planning.
  • Electric conduit: On a Shamrock route, we confirm the electric line owner before planning conduit and pothole marked utilities near the path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How can I get a quote for a Shamrock bore near Houston Street?

For a bore near Houston Street in Shamrock, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to Main Street, pavement and marked utilities. We can then assess the alignment and access needed for the work.

The route near Houston Street, not just its length, shapes the price. Shamrock is 164 road miles from Yukon, so mobilization matters. Carey silt loam and possible weathered bedrock affect drilling time; crossings of Interstate 40 or other utilities add planning. Pavement, creek or drainage routes, pits, excavator time and sand backfill can also change the scope. High profile or emergency work calls for additional planning.

Questions people ask about boring in Shamrock

Does Trinity take directional boring work in Shamrock and Wheeler County?

Yes, we take directional boring work in Shamrock, Wheeler County. Our own crews handle jobs, and vetted partner drilling contractors can work from satellite yards; customers deal with Trinity through the bore log. A route beneath US 83 or near Main Street gets planned for its ground, existing lines and access.

What ground should I expect for a Shamrock bore through Carey soil?

The USDA soil survey maps Carey silt loam over 51 percent of Shamrock. Around 40 inches down, loam is mapped across 51 percent and silty clay loam across 38 percent, with average clay content of 21 percent. That ground can drill readily, but excess fluid can soften it and reduce steering control.

Will a Shamrock bore encounter rock near US 83?

It may. Weathered bedrock is mapped within five feet across 54 percent of Shamrock, and bedrock within 40 inches across 3 percent; hard bedrock is not mapped in the top five feet. The Blaine Formation includes mudstone, gypsum, dolomite and sandstone, so a route near US 83 may need slower drilling where rock is present.

Who approves a Shamrock utility bore under Interstate 40?

TxDOT Childress District reviews the utility permit for Interstate 40 in Shamrock. The utility that owns the line files in TxDOT RULIS, while we prepare the bore plan and profile for its application. The permit sets cover requirements, and TxDOT rules call for boring or tunneling beneath existing highway pavement.

Can a Shamrock line be bored under Roundup Creek?

A bore may be planned near Roundup Creek, which lies 0.2 miles outside Shamrock’s limits, but the route needs site review. During planning for a crossing on US 83 in Shamrock, we check whether the US Army Corps of Engineers has jurisdiction. No named stream crossing is mapped inside the city, so the actual route determines whether a creek crossing is involved.

Who runs Shamrock’s water system in Wheeler County, and where does its water come from?

The locally owned Shamrock Municipal Water System uses groundwater wells. The system serves 2,311 people through 1,267 service connections, figures we keep in mind when planning underground work in Shamrock. For a bore near a water line, we locate and expose marked utilities before drilling close, so the route can be planned around the existing system.

Does Trinity serve Samnorwood and rural sites outside Shamrock?

Yes, we take work around Shamrock, including Samnorwood and rural sites outside the city limits. Samnorwood is 11.6 miles south of Shamrock. A route outside town still needs its location, line details and planned path reviewed, including any road, drainage or existing utility crossings.

How much notice is needed for a Shamrock bore along Main Street?

Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a bore along Main Street, give the path clearly. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the price of a Shamrock bore near Interstate 40?

The route and work scope determine the price, including length, pipe size, ground, utility crossings, pavement and access. Interstate 40 may add permit and crossing planning; Carey silt loam or weathered bedrock can affect drilling time. Creek or drainage crossings, pits, excavator time, sand backfill, emergency timing and the drive from Yukon also matter.

Where the Shamrock facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Shamrock

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Shamrock, Texas

Type the address of your job in Shamrock. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Shamrock

Same county: Allison. All counties: Texas county list.