trinityboringsolutions.com

Samnorwood Texas Directional Boring: Wichita Clay Loam, FM 1548 and Lake Creek

Quick Answer: Wichita loam is widespread in Samnorwood, and our directional boring, also called horizontal directional drilling (HDD), can pass beneath FM 1548 without opening pavement. Yukon is 178 road miles away, a mobilization factor for work by FM 1036. At about 40 inches, clay loam is mapped under 71 percent of the area; sticky soil can grip the pipe. Lake Creek lies 0.2 miles beyond the mapped community boundary.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Samnorwood bores at a glance

  • Unincorporated community in Collingsworth County, Texas. Population 24 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 178 miles, about 3.4 hours of driving.
  • Ground: Wichita soil is mapped on 66 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 7 percent of the area.
  • Highways inside the boundary: FM 1548 and FM 1036. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can handle directional boring near FM 1548 in Samnorwood?

Samnorwood is an unincorporated community in Collingsworth County, with 24 people in the 2020 Census count. Along FM 1548 and FM 1036, we can bore water, sewer, gas, electric conduit or fiber lines while leaving the road surface intact. The line route and utility crossings set the bore plan, especially where the mapped community has no named streets.

Our main office is in Yukon, Oklahoma, and Samnorwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From our Yukon main office, Samnorwood is 178 road miles away, and we have had no utility strike in over 25 years. That record matters when a bore passes near electric lines reported in Collingsworth County by Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative. For Samnorwood’s Wichita soil, our family business began in 1965, and we have done directional boring since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA survey show about Wichita soil in Samnorwood?

The USDA soil survey maps Wichita soil across 66 percent of Samnorwood and Lutie across 22 percent. Loam is the common surface texture, while clay loam is mapped under 71 percent of the area at about 40 inches. The survey gives an average clay content of 37 percent at that depth. Sticky clay can build on a reamer and grip the pipe, so the mapped ground points toward staged reaming and a controlled fluid plan. Near Lake Creek, we treat mapped soil patterns as planning context, not test borings, before setting a bore route.

USDA soil survey, inside the Samnorwood mapped community boundaryWhat is mapped
Soil series mappedWichita 66 percent, Lutie 22 percent, Quinlan 6 percent and Dodson 4 percent
Texture at the surfaceloam 77 percent and silty clay loam 22 percent
Texture about 40 inches downclay loam 71 percent, silty clay loam 22 percent and bedrock 6 percent
Engineering class about 40 inches downlean clay (CL) 93 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches7 percent of the area (0 percent hard rock, 7 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel66 percent of the area

The USDA survey maps bedrock within 60 inches on 7 percent of the area, with weathered bedrock represented and hard bedrock not mapped in that depth range. A seasonal water table is not mapped within 60 inches, while flood prone soils cover 1 percent. High steel corrosion risk is mapped on 66 percent, so the line owner should consider casing and tracer wire materials. The geologic map names the Guadalupian Quartermaster Formation and Whitehorse Group, undivided, with shale, siltstone, sandstone, gypsum and dolomite; softer rock can slow drilling.

How do we bore through Samnorwood clay loam?

Wichita and Lutie soils point to a sticky, clay rich bore rather than a sandy one. We adjust the fluid and reaming sequence to keep the hole stable without putting excess pressure under roads such as FM 1548.

  1. Wichita clay loam can stick to the reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe.
  2. With 37 percent average clay at about 40 inches, we watch fluid returns and keep pressure controlled near pavement on FM 1548.
  3. Before the drill approaches a marked utility, we expose it with hydrovac potholing; surface marks show position, not depth.
  4. For a proposed line beneath FM 1036, we track the drill head from the surface and log depth and pitch as the bore advances.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads, tracks or creeks could a bore cross in Samnorwood near FM 1548?

FM 1548 and FM 1036 run inside the mapped community boundary, with 0.9 and 0.8 mapped roadway miles there. The public road centerlines total 5.25 miles, but no named streets are listed. That means a route plan should use an address or map pin to identify the actual road approach rather than assume a street name. When a bore reaches either farm to market road, the crossing design must account for the road surface and its right of way.

CrossingTypeMapped extentWho has a say
FM 1548State highway0.9 roadway miles insideState highway office
FM 1036State highway0.8 roadway miles insideState highway office
Lake CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Samnorwood or within 1 mile outside the boundary, so no local track crossing is identified. Lake Creek is 0.2 miles outside the boundary, and the survey maps 2.28 miles of unnamed drainage within the community. No mapped street crossing of a named stream is identified. A proposed route toward Lake Creek still needs a planned profile, since creek work is checked for federal waterway jurisdiction during planning.

Who approves a bore in Collingsworth County near Samnorwood?

Samnorwood is unincorporated, so it has no city government to approve local streets. County roads fall to the county, while work in the right of way of FM 1548 or FM 1036 needs a TxDOT utility permit reviewed by the TxDOT Childress District. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under that utility owner’s permit. For electric or communication lines crossing a state road, the usual minimum cover is 60 inches below the lowest crossed grade. Water and pressurized sewer crossings also call for 60 inches, subject to the district permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Collingsworth County near Samnorwood?

For a Samnorwood address in Collingsworth County, we confirm the water provider with the county or local water district before planning a bore. Public water system records do not identify a provider for this community. Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report electric service in Collingsworth County, but the line owner at the work site must be confirmed before a conduit bore. That check shapes the route near FM 1548 or FM 1036.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric CooperativeElectric utilities reporting service in Collingsworth CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published for a place as small as Samnorwood, so they cannot show how many services may need replacement. In a community with 5.25 public road centerline miles and no named streets, a service route may follow FM 1548 or FM 1036. May averages 3.6 inches of rain in Collingsworth County, the wettest month, which can affect access and pit conditions. Along FM 1036, we hydrovac pothole every marked utility on the bore path before drilling near it.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Samnorwood from Childress and the Yukon yard?

Samnorwood covers 1.63 square miles in Collingsworth County at an elevation of 2,193 feet, and its ZIP code is 79079. Quail is 10.9 miles southwest; Shamrock is 11.6 miles north; Wellington is 14.1 miles south. Wellington is the county seat, while Childress, the nearest larger city, is 42.5 miles south. From our Yukon, Oklahoma main office, the drive is 178 road miles and about 3.4 hours. That distance can affect mobilization for work along FM 1548 or near Lake Creek.

Places near Samnorwood

What kinds of bores may come up near Lake Creek in Samnorwood?

  • Highway crossing: A water or communication line beneath FM 1548 can be bored without cutting the road surface, subject to the state permit.
  • Roadside utility: A conduit route alongside FM 1036 needs a profile that fits the right of way and mapped clay loam.
  • Water service: A new service near Wellington Road approaches needs its address specific water provider confirmed before the route is set.
  • Fiber drop: Fiber near the unnamed drainage mapped in Samnorwood can use a bore that leaves the surface crossing uncut.
  • Creek crossing: A route toward Lake Creek needs a planned depth and a check for federal waterway jurisdiction.
  • Acreage service: A longer service near the community boundary may need extra mobilization from the Yukon office, 178 road miles away.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How can I get a Samnorwood bore quote that accounts for Lake Creek?

Start with the Samnorwood address or a map pin, then tell us what will go underground, such as a water line near FM 1036. Add the pipe or conduit size and footage. A sketch or plans showing the route toward Lake Creek help us spot road, drainage and utility crossings before we set the bore approach.

For work near Lake Creek, we set the price from the job details rather than assuming one rate for every bore. Wichita clay loam can affect reaming and fluid needs; crossing FM 1548 brings right of way and cover requirements into the plan. We also account for utility crossings and exposure, pavement or concrete, creek or drainage work, pits, excavator time and sand backfill. The 178 road miles from Yukon affect mobilization, and high profile or emergency work can change the scope.

Questions people ask about boring in Samnorwood

Does Trinity take directional boring work in Samnorwood and Collingsworth County, and who staffs it?

Yes. Trinity takes Samnorwood work with its own crews and with crews from vetted partner drilling contractors. Our main office is in Yukon, Oklahoma, and you deal with Trinity through the bore log regardless of which crew is on site. For a route near FM 1548, we plan around the road and the marked utilities.

Is there rock under Samnorwood, and how much bedrock is mapped in the top five feet?

The USDA soil survey maps bedrock within 60 inches on 7 percent of Samnorwood, including weathered bedrock; hard bedrock is not mapped in that depth range. The geologic map names the Guadalupian Quartermaster Formation and Whitehorse Group, undivided. Rock can slow a bore, so the route should be checked against site conditions.

Who approves a Samnorwood bore beneath FM 1548, and which TxDOT office reviews it?

The utility that owns the line applies for a TxDOT utility permit through RULIS, and the TxDOT Childress District reviews work in the FM 1548 right of way. For Samnorwood work, we provide the bore plan and profile and work under the utility owner’s permit, coordinating state permits through TxDOT Childress District. The district permit sets the required cover and may specify a different depth.

Can a Samnorwood utility line be bored beneath Lake Creek?

A bore can be planned toward or beneath Lake Creek, which lies 0.2 miles outside the mapped community boundary. The crossing needs a route and depth plan, and waterway jurisdiction is checked during planning. The USDA survey also maps 2.28 miles of unnamed drainage within Samnorwood, which may affect a route.

Which electric lines serve Samnorwood in Collingsworth County, and who confirms conduit specs?

Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report electric service in Collingsworth County. Those records do not establish which company serves a particular Samnorwood address. The line owner must be confirmed before a conduit bore so the owner can provide the applicable conduit requirements for a route near FM 1036.

Who is responsible for Samnorwood streets in Collingsworth County, and must a road be cut?

Samnorwood has no city government because it is an unincorporated community. The county is responsible for county roads, while FM 1548 and FM 1036 are state highways. A bore can pass beneath a road without an open cut; work in a state highway right of way needs the TxDOT permit process.

How far is Samnorwood from Childress and Trinity’s Yukon office, and does distance affect the job?

Samnorwood is 42.5 miles north of Childress and 178 road miles from our Yukon, Oklahoma main office, about a 3.4 hour drive. That distance can affect mobilization for a bore near FM 1548 or Lake Creek. The route, equipment and job schedule all help determine the travel plan.

How much Texas811 notice does a Samnorwood bore in Collingsworth County need, and what about worn marks?

For a bore near FM 1036, submit a Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. In Collingsworth County, we submit a new request if the start slips more than 14 days past the original notice. Near Quail, we have worn or moved utility marks refreshed before work continues along the planned bore path.

What job details affect the cost of directional boring near FM 1548 in Samnorwood, including mapped Wichita soils?

For bores in Samnorwood’s loam surface soil, we price the full job scope, not just the footage. Wichita clay loam, pipe or conduit size, bore length, utility crossings, pavement, drainage work, pits and excavator time all matter. A route under FM 1548 also brings right of way planning into the job, and mobilization from Yukon is affected by the 178 road miles.

Where the Samnorwood facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Samnorwood

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Samnorwood, Texas

Type the address of your job in Samnorwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Samnorwood

All counties: Texas county list.