trinityboringsolutions.com

McLean Texas Directional Boring: Miles Soil, Interstate 40 and South Long Dry Creek

Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in McLean, Texas, where a bore may need to pass beneath Interstate 40. Our Yukon main office is 183 road miles from Spur 555, so mobilization is part of planning. The USDA survey maps Miles soil throughout town, with sandy clay loam about 40 inches down. Staged reaming helps manage the sticky cuttings and keep the hole stable.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

McLean bores at a glance

  • Incorporated city in Gray County, Texas. Population 648 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 183 miles, about 3.4 hours of driving.
  • Ground: Miles soil is mapped on 100 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 40, Texas State Highway 273 and FM 3143. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near South Long Dry Creek in McLean?

We take directional boring work in McLean, Gray County, including routes near South Long Dry Creek. The Census Bureau Vintage 2024 estimate puts the town’s population at 648. We install water and sewer lines, gas lines, electric conduit and fiber; on streets such as 4th Street, the route and existing buried utilities determine where those lines can go.

Our main office is in Yukon, Oklahoma, and McLean work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. As a family business since 1965, we have done directional boring since 1982 and plan Interstate 40 crossings with that experience. For a route along Spur 555, our range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show about Miles soil in McLean?

The USDA soil survey maps the Miles soil series across all of McLean. At the surface, it maps fine sandy loam over 63 percent of the area and loamy fine sand over 37 percent. About 40 inches down, sandy clay loam is mapped throughout the area, with average clay content of 28 percent. Those are mapped soil patterns, not test borings. The sandy surface can cut easily but may fall in behind the drill head; the deeper clay content can make cuttings sticky and harder to clear from a reamer.

USDA soil survey, inside the McLean city limitsWhat is mapped
Soil series mappedMiles 100 percent
Texture at the surfacefine sandy loam 63 percent and loamy fine sand 37 percent
Texture about 40 inches downsandy clay loam 100 percent
Engineering class about 40 inches downclayey sand (SC) 64 percent and lean clay (CL) 36 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet of McLean, and the survey maps no seasonal water table, flood prone soils or high steel corrosion risk. That does not rule out rock deeper down. The geologic map shows the Pliocene Ogallala Formation, which includes sand, silt, clay, gravel and locally cemented caliche. A bore may meet changes in that material, so we track the head and adjust the drilling plan if the ground changes.

How do we plan a bore in McLean’s Miles soil series, with fine sandy loam at the surface rather than sandy clay loam?

On a McLean route, the sandy surface and sandy clay loam mapped about 40 inches down call for control of both the hole and the drilling fluid. We plan the bore around the route, marked utilities and the material we meet.

  1. We check the route against Miles soil: fine sandy loam and loamy fine sand at the surface can fall in, so we stage the reaming and have the pipe ready.
  2. About 40 inches down, McLean is mapped as sandy clay loam; we manage fluid and reamer buildup, then plan to pull pipe promptly after opening the hole.
  3. Before a drill nears marked lines on 4th Street, we expose them with hydrovac potholing because locate paint does not show their depth.
  4. Along a route toward South Long Dry Creek, we track the drill head from the surface and log depth and pitch as the bore advances.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross in McLean near Interstate 40?

Interstate 40 has 1.9 mapped roadway miles inside McLean. Texas State Highway 273 has 1.0 mile, and FM 3143 has 1.4 miles. A bore under existing highway pavement uses boring or tunneling rather than an open cut. The route may also run along the town’s longer streets: Spur 555 measures 2.04 miles, 4th Street 1.88 miles and 2nd Street 1.82 miles within the limits. Those street lengths help identify a route, but they do not show what is buried at a specific address.

CrossingTypeMapped extentWho has a say
Interstate 40Interstate1.9 roadway miles insideState highway office
Texas State Highway 273State highway1 roadway miles insideState highway office
FM 3143State highway1.4 roadway miles insideState highway office
South Long Dry CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside McLean or within 1 mile outside the limits, so there is no mapped track route to plan around. South Long Dry Creek is 0.5 miles beyond the limits, and no named stream is mapped inside town. No street crossing of a named stream is mapped within the limits, and no lake or pond is mapped within 1 mile. If a proposed route reaches South Long Dry Creek, the crossing needs site specific planning and a check for federal waterway jurisdiction.

Who approves a bore on McLean roads in Gray County?

Because McLean is incorporated, we treat 4th Street as a city street when planning a directional bore. Interstate 40, Texas State Highway 273 and FM 3143 are state routes; work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Amarillo District. The line owner, not the drilling contractor, submits the application through RULIS. We prepare the bore plan and profile for that filing. TxDOT cover rules call for 60 inches for electric and communication lines at highway crossings, 60 inches for water crossings and 60 inches for pressurized sewer crossings; the permit may set another depth. Any route near South Long Dry Creek is checked for Army Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may have lines in the ground in McLean, Gray County?

EPA drinking water records do not let us match a water provider to a specific McLean address. Before planning a bore near 4th Street, confirm that address’s provider with the city, the county or the local water district. Utilities reporting electric service in Gray County include Southwestern Electric Power, Southwestern Public Service and Greenbelt Electric Cooperative. We confirm the line owner for the proposed address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Southwestern Public Service and Greenbelt Electric CooperativeElectric utilities reporting service in Gray CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put McLean’s median housing year at 1951; 77 percent of housing units were built before 1960, 18 percent from 1960 to 1999 and 5 percent in 2000 or later. That age makes replacement work along 4th Street a reasonable possibility, but it does not date buried lines. We hydrovac pothole marked utilities on the route before drilling near them, since paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is McLean in relation to Lefors and other nearby places?

McLean is an incorporated town in Gray County, at an elevation of 2,862 feet, with 1.16 square miles of land and ZIP code 79057. Alanreed is 7.6 miles west, Lefors is 18.4 miles northwest, and Shamrock is 20.0 miles east. Pampa, the county seat and nearest larger city listed, is 30.0 miles northwest. From our Yukon, Oklahoma yard, the drive to McLean is 183 road miles and 3.4 hours, which figures into planning work along Interstate 40 or Spur 555.

Places near McLean

Which jobs call for a bore near 4th Street in McLean?

  • Highway crossing: A bore beneath Interstate 40 uses a planned route under the pavement, with the line owner’s permit and required cover addressed before work.
  • Water service: A service near 4th Street needs the address specific water provider confirmed before we plan the connection route.
  • Fiber conduit: A Spur 555 fiber route can use a bore to pass beneath pavement without cutting the street surface.
  • Utility replacement: Older housing along 2nd Street may call for a replacement service bore, with marked lines exposed before drilling nearby.
  • Creek crossing: A proposed route toward South Long Dry Creek needs channel planning and a jurisdiction check before the bore is set.
  • Electric conduit: Near FM 3143, we confirm the electric line owner and plan any right of way work under the appropriate permit.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to price a bore near Spur 555 in McLean?

Start with the address or map pin, whether the route is near Spur 555 or another street, and what needs to go underground. Add the pipe or conduit size and the planned footage. A sketch or plans can show pits, existing services and pavement crossings. Those details let us review the route before estimating the work.

The Miles soil conditions matter first: the sandy surface can cave behind the bit, while deeper sandy clay loam can load the reamer with sticky cuttings. We also consider footage, pipe or conduit size, utilities that must be crossed and exposed, pavement or concrete, pits, excavator time and sand backfill. A route beneath Interstate 40 adds highway planning, while 183 road miles from Yukon affects mobilization. For Interstate 40 crossings, we account for TxDOT Amarillo District permitting, since high profile or emergency work can also change the scope.

Questions people ask about boring in McLean

Does Trinity Boring Solutions take directional boring work in McLean, Gray County, and who staffs it?

Yes. We take work in McLean, Gray County, using our own crews and crews from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity through the job, regardless of which crew is on site. That staffing model applies to routes near Interstate 40 as well as town streets.

What does McLean’s older housing near 4th Street mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1951, with 77 percent of units built before 1960. That makes replacement services a possible need near 4th Street, but housing age does not establish the age or location of buried pipe. We expose marked lines before drilling close to them.

What ground does a bore pass through in McLean Miles soil?

The USDA soil survey maps Miles soil across McLean, with fine sandy loam or loamy fine sand at the surface and sandy clay loam about 40 inches down. The surface sand can cave behind the bit, while deeper clay can cling to the reamer. Those mapped layers guide planning, but they are not a test of a particular bore path.

Will we encounter rock on a directional bore in McLean near South Long Dry Creek, and how should we plan the crossing depth?

Bedrock is not mapped in the top five feet of McLean, but deeper rock is not ruled out. The geologic map identifies the Pliocene Ogallala Formation, with sand, silt, clay, gravel and locally cemented caliche. If the bore meets harder material near Spur 555, we adjust the drilling approach to what the head encounters.

Who approves a bore beneath Interstate 40 in McLean?

The line owner applies for the TxDOT utility permit, and the TxDOT Amarillo District reviews work in the Interstate 40 right of way. We provide the bore plan and profile for the owner’s filing. A highway crossing also needs to meet its permitted cover depth and construction conditions.

Can a line be bored under South Long Dry Creek near McLean?

A bore can be planned for a proposed South Long Dry Creek crossing, but its route and depth need review. The creek is 0.5 miles outside McLean’s limits, so the site should be checked for U.S. Army Corps of Engineers jurisdiction during planning. The bore plan depends on the actual channel and line route.

Does Trinity cover Alanreed and rural sites outside McLean?

We take work across Texas, including McLean and rural routes around nearby Alanreed. Alanreed is 7.6 miles west of McLean. Send the site location and route details so we can assess the bore length, ground and access for that specific job.

How much notice does Texas811 need for a bore near Spur 555 in McLean?

For a bore near Spur 555, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For work in Gray County, we schedule around Texas811’s stated minimum of at least two working days before excavation. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore under Interstate 40 in McLean?

The Miles soil and the route’s crossings are key factors, especially if work reaches Interstate 40. Price also depends on bore length, pipe or conduit size, utilities to expose, pavement or concrete, pits, excavator time, sand backfill and mobilization from Yukon. The route and scope determine which of those items apply.

Where the McLean facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in McLean

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in McLean, Texas

Type the address of your job in McLean. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for McLean

All counties: Texas county list.