trinityboringsolutions.com

Manchaca Texas Directional Boring: Crawford Clay, FM 1626 and Bear Creek

Quick Answer: On FM 1626, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Manchaca utility crossings. Twin Creeks Road is among the community’s longest streets, and the Yukon main office is 413 road miles away. The USDA soil survey maps Crawford soil and bedrock within 40 inches across 61% of Manchaca, so a bore may shift from clay to rock. Bear Creek crossings need route and depth planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Manchaca bores at a glance

  • Unincorporated community in Travis County, Texas. Population 2,266 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 413 miles, about 8 hours of driving.
  • Ground: Crawford soil is mapped on 24 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 61 percent of the area.
  • Highways inside the boundary: FM 1626. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Bear Creek and Little Bear Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Twin Creeks Road in Manchaca?

Trinity Boring Solutions takes directional boring work in Manchaca, an unincorporated community in Travis County with 2,266 people in the 2020 Census count. Along Twin Creeks Road and Burson Drive, our crews can install water, sewer, gas, electric conduit and fiber lines by bore, with the route set to suit the property and crossings.

Our main office is in Yukon, Oklahoma, and Manchaca work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored since 1982, building more than four decades of experience relevant to Manchaca’s mapped Crawford clay and shallow bedrock. The family business began in 1965, and Trinity stays involved from the first call through the bore log.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore expect in Manchaca near Crawford soil?

The USDA soil survey maps Crawford as the largest named soil series in Manchaca, covering 24% of the mapped area. Patrick accounts for 15% and Lewisville for 14%, so the route can cross different soil patterns even within this small community. At about 40 inches below the surface, bedrock is mapped across 61% of the area; silty clay is mapped there across 15%, and very gravelly loamy sand across 9%. The mapped average clay content at that depth is 22%. These are survey patterns, not test borings.

USDA soil survey, inside the Manchaca mapped community boundaryWhat is mapped
Soil series mappedCrawford 24 percent, Patrick 15 percent, Lewisville 14 percent, Eckrant 8 percent and Speck 8 percent
Texture at the surfaceclay 42 percent, silty clay 27 percent and very stony clay 8 percent
Texture about 40 inches downbedrock 61 percent, silty clay 15 percent and very gravelly loamy sand 9 percent
Engineering class about 40 inches downsilty gravel (GM) 22 percent, lean clay (CL) 9 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down22 percent
Bedrock mapped within 60 inches61 percent of the area (49 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel85 percent of the area

The USDA soil survey maps bedrock within 60 inches across 61% of Manchaca, including hard bedrock across 49% and weathered bedrock across 12%; the typical mapped depth is 23 inches. That can mean slower drilling and a change in drilling tools along a route. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6%, so Bear Creek still deserves channel depth planning. High steel corrosion risk is mapped across 85%, a concern for steel casing and tracer wire that the line owner should address. Geologic mapping identifies Onion Creek Marl, a Cenozoic unit of sand, gravel and clay near Onion Creek and Buda.

How do crews bore Manchaca ground with shallow bedrock?

We adapt the bore to Manchaca’s mapped Crawford clay and shallow bedrock, using staged reaming where the ground calls for it. On a route near Bear Creek, we also plan depth around the channel.

  1. Crawford clay can cling to a reamer, so we use staged passes and manage drilling fluid before pulling pipe along a Manchaca route.
  2. Where Manchaca’s mapped sand or gravelly ground appears, we prepare pipe before the final reaming pass to reduce the time an open hole can cave.
  3. With bedrock mapped within 40 inches across 61% of Manchaca, we check the drill head’s depth and pitch as the bore moves between soil and rock.
  4. Near Bear Creek, we plan the bore below the channel and check marked utilities along the route before the drill approaches them.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Manchaca bore cross near FM 1626?

FM 1626 runs through Manchaca, with 3.5 mapped roadway miles inside the community boundary. Texas State Highway 45 is 0.1 miles outside that boundary, and Interstate 35 is 1.2 miles away. There are 18.85 public road centerline miles inside the community. Twin Creeks Road is the longest named street at 1.05 miles, followed by Lowden Lane at 0.79 miles and Burson Drive at 0.76 miles. A bore can route beneath pavement rather than cut across those streets, subject to the road owner’s approvals.

CrossingTypeMapped extentWho has a say
FM 1626State highway3.5 roadway miles insideState highway office
Texas State Highway 45Highway nearby0.1 miles outsideState highway office
Interstate 35Highway nearby1.2 miles outsideState highway office
Union PacificRailroad1.44 track miles insideThe railroad
Bear CreekStream2.51 channel miles insideChecked for Corps of Engineers jurisdiction
Little Bear CreekStream1.61 channel miles insideChecked for Corps of Engineers jurisdiction
Onion CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Slaughter CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Garlic CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Carlic CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.44 track miles in Manchaca on its Austin Subdivision, and one street and rail crossing is mapped inside the community. An Amtrak route uses the track. Bear Creek has 2.51 channel miles here and Little Bear Creek has 1.61; two street crossings of named streams are mapped. A creek route needs depth planning, and water crossings are checked for possible U.S. Army Corps of Engineers jurisdiction. Please provide Manchaca’s public record; no street, creek, highway, railroad, soil series, neighboring town, county, or road mileage was included, so I cannot add the requested local specifics without inventing facts.

Who approves Manchaca bore work in Travis County?

Travis County handles local street authority in unincorporated Manchaca, while TxDOT Austin District reviews work on FM 1626 and other state highway rights of way. Under existing highway pavement, TxDOT rules call for boring or tunneling. At a highway crossing, required cover is 60 inches for electric and communication lines, 60 inches for water lines and 60 inches for pressurized sewer; a permit may specify another depth. The utility owner applies through TxDOT’s RULIS system, using the bore plan and profile we prepare. A Union Pacific track crossing requires an agreement with the railroad, and a Bear Creek route is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Manchaca in Travis County?

In Manchaca, county records name four electric utilities reporting service, while the water provider must be checked for the address. Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service in Travis County; the line owner needs confirmation before an electric conduit bore is planned. EPA drinking water records do not identify a provider for this specific community. Confirm the water provider for the address with Travis County or the local water district before planning a bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Travis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Manchaca’s median housing year at 2014; 2% of housing was built before 1960 and 78% in 2000 or later. That mix can mean a route serves either an older line being replaced or a newer service connection. Near Burson Drive, we hydrovac expose marked utilities before drilling close to them: locate paint shows position, not depth, so the actual line must be uncovered and checked.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Manchaca and San Leanna for bore planning?

Manchaca is an unincorporated Travis County community at 680 feet elevation, covering 1.96 square miles. The provided facts support only the mapped lakes and ponds and ZIP codes, not distinct local details for all six rewrites. San Leanna is 1.2 miles northeast, Hays is 2.3 miles southwest, and Buda is 4.0 miles south; Buda is the nearest larger city. Austin, the county seat, is 12.3 miles northeast. The Yukon, Oklahoma main office is 413 road miles away, an 8.0 hour drive, so distance can affect mobilization for a Manchaca bore.

Places near Manchaca

What boring work comes up near Burson Drive in Manchaca?

  • Highway crossing: An FM 1626 bore runs beneath pavement, with the utility owner arranging the TxDOT permit and required cover.
  • Street service: A water or sewer line can run beneath Burson Drive without an open cut across the road surface.
  • Fiber route: Conduit along Twin Creeks Road can connect a property while avoiding surface cuts at driveways and sidewalks.
  • Creek crossing: A route beneath Bear Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A bore beneath Union Pacific’s Austin Subdivision needs an agreement with the railroad that owns the track.
  • Utility potholing: Near Lowden Lane, hydrovac exposure checks marked lines before drilling close to them, since paint does not show depth.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Manchaca work near Bear Creek?

A map pin matters for a Manchaca quote because a route near Bear Creek may need different depth planning than one along FM 1626. Please include the missing local facts so each sentence can be rewritten accurately. A sketch or plans help us see street, creek and utility crossings before we scope the bore.

Price follows the work, and Manchaca’s 413 road miles from Yukon affect mobilization. Crawford clay and mapped shallow bedrock can change drilling time and tooling. The number of exposed utilities, crossings of FM 1626 or Union Pacific track, pavement or concrete, and a Bear Creek crossing also shape the plan. Pits, excavator time, sand backfill and high profile or emergency work can add to the scope. The route and pipe or conduit size help us assess those factors together.

Questions people ask about boring in Manchaca

Does Trinity take directional boring jobs in Travis County near Manchaca?

Yes. We take directional boring work in Manchaca and staff it with our crews or crews from vetted drilling contractor partners. The public record is needed to connect the crew and bore log sentence to a real Manchaca location. The 2020 Census count for Manchaca is 2,266.

Who approves a bore under FM 1626 in Manchaca?

TxDOT Austin District reviews work in the FM 1626 right of way. The utility owner submits the application through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. TxDOT sets highway cover requirements, so the plan accounts for the line type and crossing location.

What does a bore under Union Pacific track in Manchaca need?

A Manchaca bore beneath Union Pacific’s 1.44 track miles needs an agreement with the railroad that owns the track. That agreement governs crossing conditions such as casing, depth and flagging. The track is on the Union Pacific Austin Subdivision, and one street and rail crossing is mapped inside the community.

Can a utility line be bored under Bear Creek in Manchaca?

A line can be planned beneath Bear Creek, which has 2.51 channel miles in Manchaca, but the route and depth need review. Water crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. Flood prone soils cover 6% of the mapped area, so channel conditions matter to the bore plan.

Who owns electric lines in Travis County near Manchaca, and who confirms conduit specs?

Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report service in Travis County. That does not establish which provider serves every Manchaca address. Confirm the line owner for the specific route, then check conduit specifications with that owner before planning the bore.

Does Travis County control Burson Drive in Manchaca, and does it need to be cut?

Manchaca is unincorporated, so it has no city government; Burson Drive street authority belongs to the county. A directional bore can pass beneath the street without cutting its surface, subject to the applicable approval. The mapped length of Burson Drive inside the community is 0.76 miles.

How much notice does Texas811 need for a bore near Twin Creeks Road in Manchaca?

For a bore along Twin Creeks Road, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. The public record is needed to connect the schedule sentence to a real Manchaca location. The public record is needed to connect the marking sentence to a real Manchaca location.

How far is Manchaca from the Yukon office, and does Buda affect the job?

Manchaca is 413 road miles and an 8.0 hour drive from Trinity’s Yukon, Oklahoma main office. Buda is 4.0 miles south of Manchaca, but it does not change that drive from Yukon. The distance can affect mobilization, alongside route conditions such as Bear Creek or FM 1626 crossings.

What affects the cost of a directional bore near FM 1626 in Manchaca?

The scope drives the price: bore length and pipe or conduit size, mapped Crawford clay and shallow bedrock, and the number of utilities to expose all matter. A crossing of FM 1626, Union Pacific track or Bear Creek can add planning needs. Pavement, pits, excavator time, backfill, emergency timing and the 413 road miles from Yukon also affect the work.

Where the Manchaca facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Manchaca

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Manchaca, Texas

Type the address of your job in Manchaca. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Manchaca

Same county: Austin · Pflugerville · Manor · Lakeway · Leander · Wells Branch · Lago Vista · Bee Cave · Hornsby Bend · Cedar Park · West Lake Hills · Barton Creek. All counties: Texas county list.