trinityboringsolutions.com

West Lake Hills Texas Directional Boring: Brackett Soil, Loop 360 and Bee Creek

Quick Answer: Brackett soil and shallow rock shape bores in West Lake Hills; hard material can slow the drill and affect steering. We do directional boring, also called horizontal directional drilling (HDD), for routes beneath Loop 360 and local streets. West Lake Hills is 403 road miles from our Yukon, Oklahoma main office, with Redbud Trail among the routes a project may cross. The USDA soil survey maps bedrock within 40 inches across 72 percent of the city, so a site check matters.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

West Lake Hills bores at a glance

  • Incorporated city in Travis County, Texas. Population 3,208 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 403 miles, about 7.8 hours of driving.
  • Ground: Brackett soil is mapped on 44 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 72 percent of the area.
  • Highways inside the boundary: Loop 360. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Bee Creek and Little Bee Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Redbud Trail in West Lake Hills?

Trinity Boring Solutions takes directional boring work in West Lake Hills, including routes along Redbud Trail in Travis County. With a population of 3,208, West Lake Hills is an incorporated city, so we coordinate underground work within its city limits. Brackett soil is common here, and its shallow rock can slow a bore. We install water, sewer, gas, electric conduit and fiber on routes beneath streets such as Redbud Trail.

Our main office is in Yukon, Oklahoma, and West Lake Hills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, factoring in streets such as Redbud Trail when planning routes. The roughly 4,100 foot, 48 inch bore beneath the Arkansas River in Tulsa shows our reach; a route under Redbud Trail is a much shorter kind of job.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Brackett soil like to bore through in West Lake Hills?

West Lake Hills has Brackett and Eckrant soils over shallow rock, a mix that can make a bore slow and firm under the drill. The USDA soil survey maps Brackett across 44 percent of the city and Eckrant across 27 percent. At about 40 inches below the surface, bedrock is mapped across 72 percent and cemented material across 22 percent; silty clay covers 5 percent. Average clay content at that depth is 43 percent. These are mapped patterns, not test borings, so the route needs site specific evaluation.

USDA soil survey, inside the West Lake Hills city limitsWhat is mapped
Soil series mappedBrackett 44 percent, Eckrant 27 percent, Urban land (miscellaneous area) 23 percent and Volente 5 percent
Texture at the surfacegravelly clay loam 44 percent, very stony clay 27 percent and cemented material 22 percent
Texture about 40 inches downbedrock 72 percent, cemented material 22 percent and silty clay 5 percent
Engineering class about 40 inches downfat clay (CH) 5 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches72 percent of the area (28 percent hard rock, 44 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel33 percent of the area
Mapped as urban land (disturbed fill)23 percent of the area

Bedrock is typically mapped about 14 inches down in West Lake Hills, and weathered or hard rock can change the bit choice and steering at the soil contact. Seasonal water tables and flood prone soils are not mapped in the survey. High steel corrosion risk is mapped across 33 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. The USDA map includes Cherty Calcareous Clay Solution Residuum of Cenozoic age and Glen Rose Limestone of Albian age, both relevant to changing ground conditions.

How do crews handle shallow bedrock in West Lake Hills?

In West Lake Hills, we match the drill setup to Brackett soil, cemented material and the shallow bedrock shown by the USDA soil survey. We track the head from the surface and record its depth and pitch.

  1. Brackett clay can cling to the reamer, so we control fluid, open the hole in stages and plan the pull for the same work window.
  2. Where the West Lake Hills survey maps shallow bedrock, we select a rock capable setup and slow down at the soil to rock contact.
  3. Before a route near Bee Creek, we plan the bore profile around the channel and check whether the crossing falls under federal jurisdiction.
  4. Along Redbud Trail, we hydrovac each marked utility on the bore path before the drill approaches; surface paint does not show line depth.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What is in the way of a new line in West Lake Hills near Loop 360?

Loop 360 has 1.2 mapped roadway miles inside West Lake Hills, so a route beneath it needs highway coordination. Loop 1 runs 0.7 miles beyond the city limits. The long local street routes include Redbud Trail at 2.53 miles, Bee Caves Road at 2.41 miles and Yaupon Valley Road at 2.16 miles. These road corridors give a project several possible paths, but pavement and the line route affect the bore plan.

CrossingTypeMapped extentWho has a say
Loop 360State highway1.2 roadway miles insideState highway office
Loop 1Highway nearby0.7 miles outsideState highway office
Bee CreekStream2.19 channel miles insideChecked for Corps of Engineers jurisdiction
Little Bee CreekStream1.72 channel miles insideChecked for Corps of Engineers jurisdiction
Colorado RiverStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Barton CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Skunk Hollow CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside West Lake Hills or within one mile outside its limits, so a mapped rail crossing is not part of the local route picture. Bee Creek runs 2.19 channel miles in the city and Little Bee Creek 1.72; mapped street crossings of named streams total eight. A creek route needs channel and access planning, and a water crossing is checked for U.S. Army Corps of Engineers jurisdiction. Although no lakes or ponds are mapped within one mile, we account for Bee Creek and Little Bee Creek when planning bore routes.

Who has to sign off on a bore in West Lake Hills in Travis County?

West Lake Hills city streets, including Redbud Trail, belong to the city, while a bore in Loop 360 right of way goes through TxDOT’s Austin District. For that state highway work, the line owner files the utility permit through TxDOT’s RULIS system, not the driller; we prepare the bore plan and profile for the owner’s application. TxDOT cover rules call for 60 inches below the lowest crossed grade for electric and communication lines, and 60 inches for water lines. Bee Creek crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in West Lake Hills in Travis County?

The water provider for a specific West Lake Hills address has to be confirmed with the city, the county or the local water district before a bore is planned; the available records do not match a provider to each address. In Travis County, Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service. Those reports do not establish which one owns the line at a Redbud Trail address, so confirm the line owner before planning conduit.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Travis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The median housing year in West Lake Hills is 1988; we consider the Brackett soil series when assessing underground bore routes. West Lake Hills homes are 4 percent pre 1960, 64 percent from 1960 to 1999, and 32 percent 2000 or later; we still verify marked utilities. Older Bee Caves Road corridors may call for replacement routes, while newer properties may need service extensions. For a proposed bore near Loop 360, we hydrovac pothole every marked utility before drilling close; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near West Lake Hills, including Lost Creek?

West Lake Hills is an incorporated city in Travis County, with an elevation of 858 feet across 3.59 square miles. ZIP code 78746 covers the city. Lost Creek is 2.2 miles west, Rollingwood is 2.1 miles southeast, and Barton Creek is 3.4 miles west. Austin, the county seat and nearest larger city, is 3.6 miles east. From our Yukon yard, the route is 403 road miles and a 7.8 hour drive, which affects how we plan mobilization for a Redbud Trail bore.

Places near West Lake Hills

What boring work comes up in West Lake Hills near Bee Creek?

  • Highway crossing: A route beneath Loop 360 needs a bore plan suited to state highway right of way and its pavement.
  • Street service: A water or sewer service beneath Redbud Trail can keep the street surface uncut, with pits placed in the dirt at each end.
  • Fiber conduit: A conduit route along Bee Caves Road needs marked utilities exposed before drilling near them.
  • Creek crossing: A route beneath Bee Creek needs a planned profile and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rock bore: Brackett soil and shallow bedrock near Yaupon Valley Road may call for rock tooling and careful steering.
  • Electric conduit: On a route near Loop 360, the line owner needs to be confirmed before conduit planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring on Redbud Trail in West Lake Hills?

For a Redbud Trail quote, first send the address or map pin. Then tell us what goes in the ground, such as water or fiber, and the pipe or conduit size. Give us the footage, whether the route approaches Loop 360 or Bee Creek, and a sketch or plans if available. Those details let us understand the route before planning the bore.

The 403 road miles from Yukon matter for mobilization, then Brackett soil and shallow bedrock shape the drilling work. A route beneath Loop 360 or near Bee Creek adds crossing and access details. Price also reflects length, pipe or conduit size, utilities to expose, pavement or concrete, pits, excavator time and sand backfill. High profile or emergency work near Loop 360 can change our scope, so we confirm the relevant permit path with the TxDOT Austin District. A route sketch for Redbud Trail helps show which factors apply.

Questions people ask about boring in West Lake Hills

Does Trinity Boring Solutions take West Lake Hills jobs in Travis County, and how are crews assigned?

Yes, we take directional boring jobs in West Lake Hills and Travis County. Our Yukon office manages the work, with our crews and partner drilling contractors from vetted satellite yards available for the job. You work with Trinity from the first call through the bore log, whether the route is near Redbud Trail or Bee Creek.

Who owns electric lines in West Lake Hills, Travis County, and who confirms conduit specs?

The line owner depends on the West Lake Hills address and must be confirmed before conduit planning. Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report service in Travis County, but that does not identify the owner at a specific Bee Caves Road address. Confirm line ownership and conduit requirements with the utility that owns the line.

Who controls Yaupon Valley Road in West Lake Hills, and can a bore avoid cutting it?

Yaupon Valley Road is a city street in incorporated West Lake Hills. A directional bore can pass beneath the roadway without opening a trench through the pavement, with entry and exit pits set off the street. The exact route and access near Yaupon Valley Road determine whether that approach fits the job.

How old are homes and buried lines near Bee Caves Road in West Lake Hills?

West Lake Hills housing has a median year built of 1988, according to the American Community Survey 2019 to 2023 five year estimates. That mix means a Bee Caves Road project could involve an older line being replaced or a newer service being added. Along a proposed route near Yaupon Valley Road, we expose marked utilities before drilling close to them to verify clearance.

Does Brackett soil in West Lake Hills corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 33 percent of West Lake Hills, including areas with Brackett soil. The line owner decides what coating is appropriate for steel casing or tracer wire. HDPE avoids the steel corrosion concern, but pipe choice depends on the project requirements and the utility owner.

What ground will a bore hit in Brackett soil areas of West Lake Hills?

The USDA soil survey maps Brackett across 44 percent of West Lake Hills, with gravelly clay loam at the surface. At about 40 inches down, bedrock is mapped across 72 percent and cemented material across 22 percent. These are mapped soil patterns, not test borings, so actual conditions along a Redbud Trail route need to be checked.

Does Trinity cover Rollingwood and rural sites outside West Lake Hills?

Yes, Trinity takes work across Texas, including West Lake Hills, nearby Rollingwood and sites outside city limits. Rollingwood is 2.1 miles southeast of West Lake Hills, and Lost Creek is 2.2 miles west. The route and access for each Bee Creek area project help determine how the work is staffed.

How much notice does Texas811 need for a West Lake Hills bore on Redbud Trail?

For a Redbud Trail bore, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. In Travis County, if the start slips more than 14 days past the original notice, we submit a new request. When marks are worn or moved along a proposed route near Rollingwood, we have them refreshed through Texas811 before work continues.

What affects the cost of a directional bore in West Lake Hills near Loop 360?

The job route and scope determine the price for a West Lake Hills bore near Loop 360. Length, pipe or conduit size, Brackett soil and shallow bedrock all affect the drilling plan. So do exposed utilities, pavement, creek crossings such as Bee Creek, pits, equipment time and mobilization from Yukon.

Where the West Lake Hills facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in West Lake Hills

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in West Lake Hills, Texas

Type the address of your job in West Lake Hills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for West Lake Hills

Same county: Pflugerville · Manor · Lakeway · Leander · Wells Branch · Lago Vista · Bee Cave · Hornsby Bend · Cedar Park · Shady Hollow · Hudson Bend · Jonestown. All counties: Texas county list.