trinityboringsolutions.com

Barton Creek Texas Directional Boring: Brackett Soil, Barton Creek And Glen Rose Limestone

Quick Answer: Barton Creek is an unincorporated community in Travis County, where mapped street crossings of Barton Creek make directional boring, also called horizontal directional drilling (HDD), useful for lines that need to pass beneath the creek. Loop 360 is 0.9 miles outside the mapped community boundary, and the Yukon office is 407 road miles from Barton Creek. Brackett soil covers 67 percent of the mapped area, and bedrock at a typical depth of 15 inches can slow reaming and affect steering.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Barton Creek bores at a glance

  • Unincorporated community in Travis County, Texas. Population 3,356 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 407 miles, about 7.9 hours of driving.
  • Ground: Brackett soil is mapped on 67 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 89 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Loop 360 and Texas State Highway 71.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Barton Creek, South Short Spring Branch Creek, North Short Spring Branch Creek and Short Spring Branch.
  • Public water: Barton Creek Water Supply Corporation, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Loop 360 in Barton Creek?

Barton Creek is an unincorporated community in Travis County, so its streets are not owned by a city government; Trinity takes directional boring work for routes along Barton Creek Boulevard and other community roads. The Census Bureau counted 3,356 people here in 2020 and does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along streets such as Lost Creek Boulevard, with the route planned around marked utilities and the surface.

Our main office is in Yukon, Oklahoma, and Barton Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965 and has done directional boring since 1982, including planning routes around Barton Creek Boulevard. For a service run along Escala Drive or a longer crossing of Barton Creek, our equipment range covers 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Barton Creek ground like to bore through Brackett soil?

The USDA soil survey maps Brackett across 67 percent of Barton Creek and gravelly clay loam across the same share of the surface. Very stony clay covers 20 percent, while silty clay loam covers 8 percent. About 40 inches below the surface, bedrock is mapped across 89 percent of the area; the remaining mapped texture includes silty clay and a small share of very gravelly sand. We treat Brackett and Eckrant as mapped soil patterns near Barton Creek, not test borings, and verify ground conditions before boring. Clay can hold an open hole but stick to a reamer, so staged reaming and fluid adjustments may be needed.

USDA soil survey, inside the Barton Creek mapped community boundaryWhat is mapped
Soil series mappedBrackett 67 percent, Eckrant 20 percent, Volente 8 percent and Alluvial land (miscellaneous area) 3 percent
Texture at the surfacegravelly clay loam 67 percent, very stony clay 20 percent and silty clay loam 8 percent
Texture about 40 inches downbedrock 89 percent, silty clay 8 percent and stratified very gravelly coarse sand to very gravelly sand 3 percent
Engineering class about 40 inches downfat clay (CH) 8 percent and silty gravel (GM) 3 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inches89 percent of the area (21 percent hard rock, 67 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel30 percent of the area

Bedrock is typically mapped at 15 inches in Barton Creek, with hard bedrock within 60 inches across 21 percent and weathered bedrock across 67 percent. The USDA soil survey maps no seasonal water table within 60 inches, but flood prone soils cover 3 percent, so a Barton Creek crossing still needs depth planned beneath the channel. High steel corrosion risk covers 30 percent; the line owner should consider casing and tracer wire materials. The mapped Cherty Calcareous Clay Solution Residuum is Cenozoic, and Glen Rose Limestone is Albian; rock and clay contacts can affect steering and drilling time.

What does it take to bore Barton Creek where bedrock is shallow?

For Barton Creek routes through Brackett soil and shallow bedrock, we match the bit and reaming plan to the ground. A mapped creek crossing also calls for a planned profile beneath the channel.

  1. Brackett soil and gravelly clay loam can cling to the reamer, so we use staged reaming and keep the pipe ready for a same day pull.
  2. With bedrock mapped at a typical depth of 15 inches in Barton Creek, we allow for slower rock drilling and check the head as the ground changes.
  3. At a Barton Creek crossing, we plan the bore below the channel and check the route for waterway jurisdiction before choosing the profile.
  4. Along Barton Creek Boulevard, we hydrovac marked utilities before drilling near them, then track the head from the surface and log its depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross in Barton Creek near Barton Creek Boulevard?

No highway runs inside the mapped Barton Creek community boundary, but Loop 360 is 0.9 miles outside it and Texas State Highway 71 is 1.1 miles away. Barton Creek Boulevard is the longest named street inside the community at 3.11 miles. Lost Creek Boulevard runs 1.8 miles, and Chalk Knoll Drive runs 1.38 miles. A route beneath these streets needs its bore path and pits placed to avoid cutting pavement, driveways or sidewalks.

CrossingTypeMapped extentWho has a say
Loop 360Highway nearby0.9 miles outsideState highway office
Texas State Highway 71Highway nearby1.1 miles outsideState highway office
Barton CreekStream6.5 channel miles insideChecked for Corps of Engineers jurisdiction
South Short Spring Branch CreekStream1.64 channel miles insideChecked for Corps of Engineers jurisdiction
North Short Spring Branch CreekStream1.3 channel miles insideChecked for Corps of Engineers jurisdiction
Short Spring BranchStream1.06 channel miles insideChecked for Corps of Engineers jurisdiction
Hebbingston HollowStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
North Fork Sycamore CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Bee CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad runs inside or within one mile outside the mapped Barton Creek boundary, so no rail crossing is mapped there. Barton Creek runs 6.5 channel miles inside the community, and the mapped streets cross named streams at four locations. South Short Spring Branch Creek, North Short Spring Branch Creek and Short Spring Branch are also within the community. We have no lakes or ponds mapped within one mile of Barton Creek, though Barton Creek crossings still shape bore routing. Creek and drainage routes can change the bore profile and require review for federal waterway jurisdiction during planning.

Who approves a Barton Creek bore in Travis County?

Barton Creek has no city government, so permits for community streets fall to the county or state with jurisdiction over the route. Loop 360 and Texas State Highway 71 right of way work needs a TxDOT utility permit reviewed by the TxDOT Austin District. At highway crossings, electric, communication and water lines need 60 inches of cover below the lowest crossed grade; pressurized sewer lines also need 60 inches. Along the right of way, electric and communication lines need 48 inches and water lines need 36 inches. The utility owner files in RULIS, and we prepare the bore plan and profile for that application. Existing highway pavement is bored or tunneled beneath. A Barton Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near Barton Creek Water Supply Corporation?

Barton Creek Water Supply Corporation is the public water system listed for the community; it uses purchased surface water and serves 633 people through 211 service connections. That information helps frame water line planning near Barton Creek Boulevard, but the provider for a specific address still needs to be confirmed. Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service in Travis County. For an electric conduit bore near Lost Creek Boulevard, we confirm the line owner before planning the route.

Line ownerWhat it isSourceSize
Barton Creek Water Supply CorporationPublic water systemSurface water bought from another system211 connections, 633 people served
Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Travis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Barton Creek’s median housing year at 2002; 56 percent of units were built in 2000 or later, and 44 percent from 1960 to 1999. That mix can mean either replacement work or new service along streets such as Escala Drive. Before drilling near a crossing, we use hydrovac potholing to expose marked utilities: the paint shows position, not depth, and the line below an established street may not be where a surface mark suggests.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Barton Creek in relation to Lost Creek?

Barton Creek is in Travis County, covers 4.9 square miles and sits at an elevation of 812 feet. Its ZIP code is 78735. Lost Creek is 1.8 miles northeast, West Lake Hills is 3.4 miles east, and Bee Cave is 5.8 miles west and the nearest larger city. Austin, the Travis County seat, is 7.0 miles east. The Yukon, Oklahoma main office is 407 road miles away, a 7.9 hour drive; that distance is part of planning mobilization for work near Barton Creek Boulevard.

Places near Barton Creek

Which jobs call for a bore near Lost Creek Boulevard in Barton Creek?

  • Highway crossing: A bore near Loop 360 needs a profile that follows the TxDOT permit and clears the highway pavement.
  • Water service: A new or replacement line near Barton Creek Water Supply Corporation needs its owner and existing route confirmed.
  • Fiber drop: A fiber conduit along Lost Creek Boulevard can pass beneath driveways and pavement without opening a trench through them.
  • Creek crossing: A route beneath Barton Creek needs a planned depth below the channel and a check for federal waterway jurisdiction.
  • Electric conduit: Near Escala Drive, we confirm the line owner and expose marked utilities before the drill approaches them.
  • Street connection: A sewer or water connection near Chalk Knoll Drive can be bored under pavement with pits placed in the dirt.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Barton Creek bore quote near Escala Drive?

A map pin matters on Escala Drive because the exact route can change where the bore meets a marked utility, creek or pavement edge. For a bore near Chalk Knoll Drive, send us the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us locate pits and crossings along Barton Creek Boulevard or another part of the route.

In Barton Creek, soil and rock are major pricing factors because Brackett soil is widespread and bedrock is often shallow. Length, pipe or conduit size, and the number of utilities that must be exposed also affect the work. A Loop 360 crossing adds highway planning, while a Barton Creek crossing can add creek and drainage requirements. Pavement, concrete, pits, excavator time and sand backfill change the scope too. Mobilization matters because Barton Creek is 407 road miles from Yukon, and high profile or emergency work can require a different plan.

Questions people ask about boring in Barton Creek

Does Trinity take directional boring jobs in Barton Creek, Travis County, and who staffs them?

Yes. Trinity takes directional boring work in Barton Creek, and our own crews or crews from partner drilling contractors we have vetted can handle the site. You work with Trinity from the first call through the bore log, whether the route is near Barton Creek Boulevard or another Travis County road.

What ground should I expect for a Barton Creek bore through Brackett soil?

Brackett is the dominant mapped soil series in Barton Creek, covering 67 percent of the area. The USDA soil survey maps gravelly clay loam at the surface and bedrock across 89 percent at about 40 inches. Clay can stick to the reamer, while shallow rock can slow the bore.

Will a directional bore in Barton Creek run into rock?

Rock is commonly mapped close to the surface in Barton Creek: the typical depth is 15 inches, and bedrock within 60 inches covers 89 percent of the area. The USDA soil survey maps hard bedrock across 21 percent and weathered bedrock across 67 percent, so a route may need rock tooling.

Who approves a bore under Loop 360 near Barton Creek?

TxDOT reviews a Loop 360 right of way utility permit through its Austin District. The utility owner files the application in RULIS, and we prepare the bore plan and profile. Cover requirements depend on the line type and whether it crosses or runs along the highway.

Can a bore go under Barton Creek in Barton Creek, Texas?

A bore can be planned beneath Barton Creek, with the profile set to pass below the channel. The creek runs 6.5 channel miles inside the community, and a crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The route and ground conditions determine the bore design.

Who runs Barton Creek’s public water system, and where does its supply come from?

Barton Creek Water Supply Corporation is the listed public water system, and its source is purchased surface water. Public records show 211 service connections and 633 people served. For work near Barton Creek Boulevard, the water provider and line location at the specific address still need confirmation.

How far is Barton Creek from Yukon, and does the distance from Bee Cave affect a job?

Barton Creek is 407 road miles and a 7.9 hour drive from Trinity’s Yukon, Oklahoma main office. That distance can affect mobilization for a job near Bee Cave, which is 5.8 miles west and the nearest larger city. The route and scope help determine the crew and equipment plan.

How much 811 notice does a bore along Barton Creek Boulevard need, and what about the marks?

For work along Barton Creek Boulevard, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811.

What affects the price of a directional bore near Loop 360 in Barton Creek?

The main factors include length, pipe or conduit size, and Barton Creek’s shallow rock and clay. The number of utilities to expose, concrete or pavement, and creek or drainage crossings also change the scope. A Loop 360 right of way crossing and mobilization from Yukon are additional planning factors.

Where the Barton Creek facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Barton Creek

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Barton Creek, Texas

Type the address of your job in Barton Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Barton Creek

Same county: Austin · Pflugerville · Manor · Lakeway · Leander · Wells Branch · Lago Vista · Hornsby Bend · Cedar Park · Shady Hollow · Hudson Bend · Jonestown. All counties: Texas county list.