trinityboringsolutions.com

The Hills Texas Directional Boring: Brackett Soil, Hurst Creek and Glen Rose Limestone

Quick Answer: The Hills Drive and Club Estates Parkway are the longest named streets, and Hurst Creek has 1.54 channel miles mapped in town. We take directional boring, also called horizontal directional drilling (HDD), in The Hills, Texas, including routes beneath Hurst Creek. The Yukon main office is 408 road miles from The Hills, while Texas State Highway 71 lies 1.4 miles outside town. Brackett soil covers 54 percent of mapped land; shallow bedrock can slow a bore and call for rock tooling.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

The Hills bores at a glance

  • Incorporated city in Travis County, Texas. Population 2,342 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 408 miles, about 8 hours of driving.
  • Ground: Brackett soil is mapped on 54 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 79 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Texas State Highway 71.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Hurst Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in The Hills near Texas State Highway 71?

We take directional boring work in The Hills, Travis County, where the Census Bureau Vintage 2024 estimate puts the population at 2,342. Along The Hills Drive, Club Estates Parkway or a service route near Hurst Creek, we can install water, sewer, gas, electric conduit or fiber without opening the full surface corridor.

Our main office is in Yukon, Oklahoma, and The Hills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical route along The Hills Drive is shorter, with Brackett soil and Hurst Creek shaping the plan. For projects in Travis County, we are a family business that started in 1965 and has done directional boring since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore encounter in The Hills Brackett soil?

The USDA soil survey maps Brackett soil across 54 percent of The Hills, with Eckrant soils at 23 percent and Volente soil at 17 percent. Gravelly clay loam is the listed surface texture across 54 percent; about 40 inches down, the survey maps bedrock across 79 percent, silty clay across 17 percent and very gravelly coarse sand to very gravelly sand across 3 percent. The average clay content at that depth is 37 percent; we factor it into underground planning for Brackett soils in The Hills. These are mapped patterns, so the route still needs field checks.

USDA soil survey, inside the The Hills city limitsWhat is mapped
Soil series mappedBrackett 54 percent, Eckrant 23 percent, Volente 17 percent and Alluvial land (miscellaneous area) 3 percent
Texture at the surfacegravelly clay loam 54 percent, very stony clay 23 percent and silty clay loam 17 percent
Texture about 40 inches downbedrock 79 percent, silty clay 17 percent and stratified very gravelly coarse sand to very gravelly sand 3 percent
Engineering class about 40 inches downfat clay (CH) 17 percent and silty gravel (GM) 3 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches79 percent of the area (25 percent hard rock, 54 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel42 percent of the area

Bedrock is mapped within 60 inches across 79 percent of The Hills, including hard bedrock across 25 percent and weathered bedrock across 54 percent. A hard layer can call for rock tooling, while weathered material may drill more slowly than soil. The USDA survey maps no seasonal water table within 60 inches, but flood prone soils cover 3 percent. For routes near The Hills Drive, we advise the line owner to consider casing and tracer wire materials because high steel corrosion risk is mapped across 42 percent. The Glen Rose Limestone, of Albian age, is the mapped geologic unit.

How do crews handle bedrock in The Hills?

For The Hills, we match the drilling approach to mapped Brackett soil and shallow bedrock, then track the drill head as it advances. A hard rock layer can slow the bore and change the tooling needed.

  1. In Brackett soil, we use a drilling fluid plan and staged reaming to manage sticky clay, then aim to pull the pipe while the opened hole remains workable.
  2. Where the The Hills soil survey maps bedrock within 40 inches, we check the ground conditions and use rock capable tooling if the layer calls for it.
  3. Near Hurst Creek, we plan the bore path and pits to stay beneath the channel, and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
  4. Along The Hills Drive, crews hydrovac each marked utility on the path, then track the drill head from the surface and log its depth and pitch.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What does a bore have to cross in The Hills near The Hills Drive?

The Hills has 15.97 miles of public road centerlines, with The Hills Drive, Club Estates Parkway and Stillmeadow Drive among its longest named streets. Texas State Highway 71 is 1.4 miles beyond the town limits, and no highway is mapped inside them. A bore along local streets can avoid cutting the pavement, but a route that reaches the state highway right of way needs a different permit plan. The street alignment and nearby Hurst Creek also affect where entry and exit pits can fit.

CrossingTypeMapped extentWho has a say
Texas State Highway 71Highway nearby1.4 miles outsideState highway office
Hurst CreekStream1.54 channel miles insideChecked for Corps of Engineers jurisdiction
Yaupon CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Honey CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Lake TravisLake or pond13,432 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside The Hills or within 1 mile outside it, and no street and rail crossings are mapped in town. Hurst Creek has 1.54 channel miles within the limits, with three mapped street crossings of named streams. Yaupon Creek is 0.3 miles beyond the limits and Honey Creek is 0.9 miles away. Lake Travis is within 1 mile, so a route toward a creek or lake needs crossing conditions considered during planning.

Who approves a bore in The Hills and Travis County?

At Texas State Highway 71, we plan 60 inches of cover for electric, communication, water and pressurized sewer crossings; TxDOT Austin District reviews right of way utility permits. The utility owner, not the drilling contractor, files through RULIS; we prepare the bore plan and profile for that application. TxDOT may set a different depth. The Hills is incorporated, so city streets such as The Hills Drive belong to the town. A Hurst Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in The Hills and Travis County?

For a specific The Hills address, the water provider has to be confirmed with the city, Travis County or the local water district before a bore is planned. The available public water records do not identify a provider for this town, so we cannot assume which system serves a property. Utilities reporting electric service in Travis County include Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. The electric line owner needs to be confirmed before conduit plans are set.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Travis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put The Hills’ median year built at 1996; 62 percent of housing dates from 1960 to 1999 and 38 percent from 2000 or later. That mix can mean work on existing service routes as well as new connections near streets such as Lost Meadow Drive. Once the water provider and electric line owner are confirmed, we hydrovac pothole each marked utility on the bore path before drilling close to it.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

What is near The Hills and Lakeway?

The Hills is an incorporated town in Travis County at an elevation of 824 feet, covering 1.07 square miles and using ZIP code 78738. Lakeway is 0.6 miles north, Point Venture is 2.7 miles north, and Bee Cave is 3.0 miles southeast. Austin, the county seat, is 14.2 miles east; Lakeway is the nearest larger city. From our Yukon, Oklahoma yard, the drive to The Hills is 408 road miles and about 8.0 hours, which factors into mobilization for work near Club Estates Parkway.

Places near The Hills

Which jobs call for a bore in The Hills near Club Estates Parkway?

  • Highway crossing: A route approaching Texas State Highway 71 needs a plan for the highway right of way and the required cover under the crossed grade.
  • Water service: A connection near The Hills Drive starts with confirming the address water provider and checking marked lines along the planned path.
  • Electric conduit: Near Club Estates Parkway, we confirm the electric line owner and conduit specifications before setting a route through existing utilities.
  • Creek crossing: A bore beneath Hurst Creek needs a route planned below the channel, with jurisdiction checked during planning.
  • Fiber route: Along Lost Meadow Drive, a fiber bore can pass beneath pavement while crews expose marked utilities before drilling close to them.
  • Drainage crossing: A route near Yaupon Creek needs access and pit placement planned around the drainage and the mapped ground.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a The Hills bore near Lost Meadow Drive?

For a bore near Lost Meadow Drive, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the proposed route meets The Hills Drive or another street. Include the intended connection points so we can assess the path and likely pit locations.

The price reflects the route, not just its length. The 408 road miles from Yukon affect mobilization; Brackett soil, shallow bedrock and creek crossings can change drilling time and tooling. A route toward Texas State Highway 71 may involve right of way planning, while concrete or pavement, exposed utilities, pits, excavator time and sand backfill also affect the work. High profile or emergency scheduling can change the scope.

Questions people ask about boring in The Hills

Does Trinity Boring Solutions take jobs in The Hills, Travis County, and how are crews assigned?

Yes. Trinity Boring Solutions accepts directional boring work in The Hills, Travis County. You work directly with Trinity from the first call through the bore log; our crews or teams based at partner contractor yards handle the field work. The customer contact stays with Trinity even when a different crew is on site.

What ground will a bore meet in The Hills Brackett soil?

The USDA soil survey maps Brackett soil across 54 percent of The Hills, with gravelly clay loam common at the surface. At about 40 inches, it maps bedrock across 79 percent of the area, silty clay across 17 percent and very gravelly coarse sand to very gravelly sand across 3 percent. Those patterns guide planning but are not route specific tests.

How much bedrock is mapped within five feet in The Hills, and is it hard?

Bedrock is mapped within 60 inches across 79 percent of The Hills. The survey maps hard bedrock across 25 percent and weathered bedrock across 54 percent within that depth. A hard layer may need rock tooling, while weathered material can still slow a bore; actual conditions can vary along a route such as Lost Meadow Drive.

Who approves a bore under Texas State Highway 71 near The Hills?

TxDOT’s Austin District reviews a utility permit for work in the Texas State Highway 71 right of way near The Hills. The utility owner files the application in RULIS, and we prepare the bore plan and profile for it. The permit may set a depth different from the standard cover requirement.

Can a line be bored under Hurst Creek in The Hills?

A line can be planned beneath Hurst Creek in The Hills, subject to the route and site conditions. The creek has 1.54 channel miles mapped in town, and a water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Pits and the bore path must be placed with the channel in mind.

Which electric company owns the line at a The Hills address in Travis County?

The specific electric line owner has to be confirmed for the The Hills address before conduit specifications are set. Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service in Travis County, but that does not establish which one serves a particular property.

What bore sizes and lengths can Trinity handle near Lost Meadow Drive in The Hills?

Trinity handles lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near Lost Meadow Drive still needs to be checked for Brackett soil, nearby utilities, access and the space available for entry and exit pits.

How much notice does Texas811 need for a bore along The Hills Drive in The Hills?

For a bore along The Hills Drive, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our start moves more than 14 days past the original notice for a route near Lakeway, we make a new request. Before we continue work near Hurst Creek, we refresh any worn or moved marks through Texas811.

What affects the cost of directional boring near Texas State Highway 71 in The Hills?

The route, length and line size all affect a bore near Texas State Highway 71 in The Hills. Brackett soil and shallow bedrock can change drilling time; pavement, utility crossings, creek access, pits and excavator time also matter. The 408 road miles from Yukon affect mobilization, and high profile or emergency work can add planning needs.

Where the The Hills facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in The Hills

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in The Hills, Texas

Type the address of your job in The Hills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for The Hills

Same county: Austin · Pflugerville · Manor · Leander · Wells Branch · Lago Vista · Hornsby Bend · Cedar Park · Shady Hollow · West Lake Hills · Barton Creek · Hudson Bend. All counties: Texas county list.