trinityboringsolutions.com

Victoria Texas Directional Boring: Laewest Clay, US 59 and Lone Tree Creek

Quick Answer: Victoria is an incorporated county seat, so Navarro Street and other city streets belong to the city. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas for routes crossing US 59 and other Victoria roads. The Yukon main office is 498 road miles away, a factor when a route reaches Union Pacific track. Laewest soil and clay mapped around Victoria can stick to the reamer, so crews manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Victoria bores at a glance

  • County seat of Victoria County, Texas. Population 66,020 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 498 miles, about 9.9 hours of driving.
  • Ground: Laewest soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 59, US 87, US 77, US 59 Business and Loop 463. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific and CPKC (Kansas City Southern), with 68 mapped street and rail crossings.
  • Named streams inside the boundary: Lone Tree Creek, Guadalupe River, Spring Creek and Jim Branch Outfall.
  • Public water: City of Victoria, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Victoria near Union Pacific?

As an incorporated county seat, Victoria has city streets such as Navarro Street, and Trinity Boring Solutions handles directional boring for routes there. Victoria is in Victoria County, where the Census Bureau Vintage 2024 estimate puts the population at 66,020. Our crews install water, sewer, gas, electric conduit and fiber lines along local streets and beneath roads or other crossings where the route calls for a bore.

Our main office is in Yukon, Oklahoma, and Victoria work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have focused on directional boring since 1982. Four decades of boring help us plan for the sticky clay mapped around Lone Tree Creek and other Victoria routes.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should crews expect in Victoria around Laewest soil?

Laewest is the leading mapped soil series in Victoria, and its clay rich ground can make a bore sticky as the reamer advances. The USDA soil survey maps Laewest across 33 percent of the area. At about 40 inches below the surface, clay makes up 61 percent of mapped texture, while sandy clay makes up 17 percent. Average clay content at that depth is 42 percent. These are soil survey patterns, not test borings, so a route still needs site specific planning.

USDA soil survey, inside the Victoria city limitsWhat is mapped
Soil series mappedLaewest 33 percent, Telferner 29 percent, Dacosta 13 percent, Nada 12 percent and Meguin 6 percent
Texture at the surfacefine sandy loam 42 percent, clay 33 percent and sandy clay loam 13 percent
Texture about 40 inches downclay 61 percent, sandy clay 17 percent and sandy clay loam 13 percent
Engineering class about 40 inches downfat clay (CH) 77 percent, clayey sand (SC) 12 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches18 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel65 percent of the area

The USDA soil survey maps no bedrock within 60 inches, but that does not rule out rock at greater depth. A seasonal water table is mapped within 60 inches across 18 percent of the area, and flood prone soils across 6 percent, so pits and Lone Tree Creek routes need attention to water and channel depth. High steel corrosion risk is mapped across 65 percent, a concern for steel casing and tracer wire that the line owner should address. Delta silt and clay, a Late Pleistocene unit, includes clay, silt and sand that can affect fluid returns.

How do crews bore Victoria clay without opening the street?

For Victoria routes through Laewest soil, we control the fluid and enlarge the hole in stages so sticky clay does not load the reamer. A bore can leave Navarro Street or a Lone Tree Creek bank uncut.

  1. Fluid control: Victoria’s mapped heavy clay can hold to a reamer, so we use a thinner drilling fluid with polymer and watch returns to avoid pressure lifting pavement.
  2. Staged enlargement: Laewest soil can ball up on the reamer and grip pipe, so we enlarge the hole in stages and pull pipe the day the hole is opened.
  3. Utility exposure: Along older streets such as Navarro Street, we hydrovac marked utilities on the bore path before drilling near them because locate paint does not show depth.
  4. Tracking: At a Lone Tree Creek crossing, a walkover locator follows the drill head from the surface while the crew records depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Victoria bore pass under Lone Tree Creek?

Victoria bores can cross US 59, US 87, US 77, US 59 Business, Loop 463, Texas State Highway 185 or FM 1685 within the city limits. Zac Lentz Parkway is the longest named street at 14.99 miles, followed by Navarro Street at 7.34 miles and Business 77-S at 5.99 miles. John Stockbauer Drive runs 5.97 miles in the city. These routes bring pavement and right of way constraints into the bore plan, especially where a street meets a highway.

CrossingTypeMapped extentWho has a say
US 59US highway14.5 roadway miles insideState highway office
US 87US highway8.7 roadway miles insideState highway office
US 77US highway8.4 roadway miles insideState highway office
US 59 BusinessUS highway8.2 roadway miles insideState highway office
Loop 463State highway10.5 roadway miles insideState highway office
Texas State Highway 185State highway3.4 roadway miles insideState highway office
FM 1685State highway1.7 roadway miles insideState highway office
Union PacificRailroad12.97 track miles insideThe railroad
CPKC (Kansas City Southern)Railroad2.96 track miles insideThe railroad
Lone Tree CreekStream7.18 channel miles insideChecked for Corps of Engineers jurisdiction
Guadalupe RiverStream5.87 channel miles insideChecked for Corps of Engineers jurisdiction
Spring CreekStream2.75 channel miles insideChecked for Corps of Engineers jurisdiction
Jim Branch OutfallStream1.28 channel miles insideChecked for Corps of Engineers jurisdiction
Ben Jordan OutfallStream1.24 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 12.97 track miles in Victoria, while CPKC has 2.96; public records map 68 street and rail crossings in the city. Each rail crossing needs an agreement from the railroad that owns the track. Lone Tree Creek runs 7.18 channel miles, and the Guadalupe River runs 5.87 miles; public records map 39 street crossings of named streams. A creek route needs channel depth planning and a check for federal water jurisdiction. Saxet Lake is within one mile but outside the city limits.

Who approves a Victoria County bore under local roads and tracks?

For work beneath US 59, US 87, Loop 463 or another listed state highway, TxDOT reviews the utility permit through the Yoakum District. The utility that owns the line files in TxDOT’s online RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. Victoria is incorporated, so its city streets, including Navarro Street, belong to the city. A crossing of Union Pacific or CPKC track needs an agreement with that railroad. Lone Tree Creek and Guadalupe River crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Victoria water system?

The City of Victoria owns the public water system, which uses surface water and reports 24,896 service connections serving 66,932 people. For electric service in Victoria County, records list AEP Texas Central, Guadalupe Valley Electric Cooperative and Victoria Electric Cooperative. Those providers are reported for the county, not identified at every address, so we confirm the line owner before planning an electric conduit bore along a street such as John Stockbauer Drive.

Line ownerWhat it isSourceSize
City of VictoriaPublic water systemSurface water24,896 connections, 66,932 people served
AEP Texas Central, Guadalupe Valley Electric Cooperative and Victoria Electric CooperativeElectric utilities reporting service in Victoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Victoria’s median housing year at 1980; 24 percent of homes date before 1960, 52 percent from 1960 to 1999, and 24 percent from 2000 or later. A bore near Navarro Street may serve a replacement line or a newer connection, with different existing utilities to locate. We hydrovac expose marked lines along the planned path before drilling near them, since paint shows position but not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Victoria and nearby Quail Creek?

Victoria is the Victoria County seat, at 99 feet elevation, with 37.18 square miles inside its city limits. ZIP codes are 77901, 77904 and 77905, and public records put Quail Creek 6.9 miles southwest, Inez 12.3 miles east and Bloomington 13.3 miles south. Victoria is 498 road miles and a 9.9 hour drive from the Yukon yard, so distance matters when planning mobilization for a route near US 59 or Lone Tree Creek.

Places near Victoria

Which jobs call for a bore near Victoria’s Zac Lentz Parkway?

  • Highway crossing: A bore beneath US 59 or Loop 463 avoids cutting existing pavement, subject to TxDOT right of way requirements.
  • Water service: A service route near the City of Victoria system can carry water beneath Navarro Street without opening the traveled surface.
  • Fiber route: Zac Lentz Parkway’s 14.99 miles in the city offer long street corridors where a fiber conduit route may need to avoid pavement cuts.
  • Creek crossing: A route beneath Lone Tree Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A bore beneath Union Pacific track needs an agreement with the railroad that owns it before crossing details are set.
  • Utility replacement: Near John Stockbauer Drive, a bore can carry replacement water, sewer or electric conduit while keeping the street surface intact.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Victoria bore near US 59?

A map pin matters near US 59 or Lone Tree Creek because the exact route determines whether the bore meets pavement, rail or a water crossing. Send the job address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us check the route and prepare a useful scope.

A clear, short route with a known pipe size and no crossings is simpler to plan than a bore through Laewest clay near US 59 or Union Pacific track. Length, pipe size, soil, exposed utilities, pavement, creek crossings, pits, excavator time and sand backfill all affect the job. Mobilization also depends on the 498 road miles from Yukon. High profile or emergency work can add demands to the plan.

Questions people ask about boring in Victoria

Does Trinity Boring Solutions take directional boring jobs in Victoria County, and how is the crew assigned?

Yes. We take directional boring work in Victoria County, and our own crews or crews from partner contractor satellite yards handle the field work. The required service arrangement is organized from our Yukon main office, not a Victoria office. Whether a route is near US 59 or Lone Tree Creek, you deal with Trinity through the bore log.

What does boring beneath Union Pacific track in Victoria require?

A crossing beneath Union Pacific track requires an agreement from Union Pacific, the railroad that owns 12.97 track miles in Victoria. We follow the Union Pacific crossing agreement for casing, depth and flagging conditions. If the line also occupies highway right of way near US 59, TxDOT asks for a copy of the railroad agreement.

Can a line be bored under Lone Tree Creek in Victoria?

A line can be planned beneath Lone Tree Creek, which has 7.18 channel miles in Victoria, but the route needs a depth plan that stays below the channel. Before work in Victoria, we check whether the crossing falls under US Army Corps of Engineers jurisdiction. A mapped street crossing or nearby drainage can also affect the bore path.

Who runs Victoria’s public water system, and where does its water come from?

The City of Victoria owns the public water system, and its source is surface water. Public records report 24,896 service connections and 66,932 people served. For a proposed water bore near John Stockbauer Drive, the exact connection and route still need to be established before drilling.

Which electric companies report service in Victoria County, and who confirms the conduit owner?

AEP Texas Central, Guadalupe Valley Electric Cooperative and Victoria Electric Cooperative report electric service in Victoria County. Those records do not identify the provider at every address. We confirm the line owner for the specific route before planning a conduit bore near a street such as Business 77-S.

Do Victoria streets such as Business 77-S belong to the city, and must a bore cut them?

Victoria is incorporated, so Business 77-S and other city streets belong to the city, not the county. A directional bore can pass beneath a street without cutting its pavement. Where the route involves a state highway such as US 59, TxDOT rules require boring or tunneling beneath existing highway pavement.

What bore sizes and lengths can you handle for a job near John Stockbauer Drive in Victoria?

In Victoria, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The suitable setup near John Stockbauer Drive depends on what is being installed, the route and the crossings. A sketch or plan can help define the footage and size.

How much notice does Texas811 need before a bore near Zac Lentz Parkway in Victoria?

Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. A ticket for work near Zac Lentz Parkway expires if the start slips more than 14 days past the original notice. If marks are worn or moved, we refresh them through Texas811 before work continues in Victoria.

What affects the cost of directional boring near US 59 in Victoria?

The route, length, pipe or conduit size, soil, crossings and access all affect the price. Laewest clay, pavement along US 59, Union Pacific track, Lone Tree Creek crossings, pits and exposed utilities can add planning or field work. Mobilization also reflects the road distance from the Yukon yard. We assess the specific scope rather than using one factor alone.

Where the Victoria facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Victoria

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Victoria, Texas

Type the address of your job in Victoria. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Victoria

All counties: Texas county list.