trinityboringsolutions.com

Quail Creek Texas Directional Boring: Telferner Soil, US 77 And Dry Creek

Quick Answer: Quail Creek is an unincorporated community, so its streets are under county or state control; we take directional boring, also called horizontal directional drilling (HDD), for crossings such as US 77. The Yukon, Oklahoma main office is 506 road miles away, including jobs near Old Goliad Road. Telferner soil is mapped across 88 percent of the area. At about 40 inches, sandy clay is common, and sticky clay can load a reamer, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Quail Creek bores at a glance

  • Unincorporated community in Victoria County, Texas. Population 1,800 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 506 miles, about 10.2 hours of driving.
  • Ground: Telferner soil is mapped on 88 percent of the area, with sandy clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 77, US 59 Business and US 59. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Dry Creek.
  • Public water: Quail Creek Municipal Utility District, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Quail Creek under US 77?

Trinity Boring Solutions takes directional boring work for US 77 and street crossings in Quail Creek. Quail Creek is an unincorporated community in Victoria County, so there is no city government and streets are under county or state control. The Census Bureau counted 1,800 people in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along routes such as Old Goliad Road and US 59 Business.

Our main office is in Yukon, Oklahoma, and Quail Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near the Union Pacific track and the Quail Creek Municipal Utility District water system, our record of no utility strike in over 25 years is relevant to work around buried lines. Our family business began in 1965 and has provided directional boring since 1982, experience we bring to planning work in Quail Creek.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Quail Creek and Telferner soil?

The USDA soil survey maps Telferner soil across 88 percent of Quail Creek, with Telferner fine sandy loam among the common map units. Telferner urban land complex covers 46 percent, and Telferner fine sandy loam with 0 to 1 percent slopes covers 33 percent. Fine sandy loam is the surface texture across 89 percent of the mapped area. At about 40 inches below the surface, sandy clay is mapped under 55 percent and clay under 43 percent. The survey maps soil patterns, not test borings, so a bore plan still needs to account for changing ground along streets such as Moody Street.

USDA soil survey, inside the Quail Creek mapped community boundaryWhat is mapped
Soil series mappedTelferner 88 percent, Laewest 4 percent and Straber 3 percent
Texture at the surfacefine sandy loam 89 percent, clay 4 percent and loamy fine sand 3 percent
Texture about 40 inches downsandy clay 55 percent and clay 43 percent
Engineering class about 40 inches downfat clay (CH) 98 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches42 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel54 percent of the area

At Quail Creek, bedrock is not mapped in the top five feet, while the Lissie Formation is mapped as Pleistocene sand, silt and clay; deeper conditions still need to be considered during bore planning. The USDA soil survey maps a seasonal water table within 60 inches across 42 percent of the area, which can put water in pits. Flood prone soils cover 2 percent, so Dry Creek crossings need depth planning and a jurisdiction check. High steel corrosion risk covers 54 percent, so the line owner should consider casing and tracer wire materials. The mapped alluvial silt and clay unit also points to mixed fine grained ground.

How do we drill Quail Creek ground with sandy clay?

For Quail Creek’s Telferner soils and sandy clay mapped at about 40 inches, we control fluid and ream in stages. The goal is to keep the bore stable without pushing excess pressure toward pavement on US 77.

  1. At Quail Creek, sandy clay is mapped under 55 percent of the area at about 40 inches, so we use fluid suited to sticky ground and ream in stages.
  2. Telferner soil includes fine sandy loam at the surface and clay below; we watch returns near US 77 to avoid pressure lifting pavement.
  3. The seasonal water table is mapped within 60 inches across 42 percent of Quail Creek, so we keep pits small and pump out water when needed.
  4. Before drilling near Old Goliad Road, we hydrovac marked utilities on the bore path; a walkover locator tracks the head and logs depth and pitch.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a Quail Creek line go under Old Goliad Road?

Quail Creek includes US 77, US 59 Business and a short mapped stretch of US 59, so a route can involve a state highway as well as local roads. Old Goliad Road is the longest named street, with 1.97 miles inside the mapped community boundary. Moody Street has 1.57 miles and Industrial Park Drive has 1.48 miles. A bore can pass beneath pavement rather than cutting across it. The road owner and route determine which permit applies, and the bore plan needs to account for each marked utility along the path.

CrossingTypeMapped extentWho has a say
US 77US highway3 roadway miles insideState highway office
US 59 BusinessUS highway1.6 roadway miles insideState highway office
US 59US highway0.1 roadway miles insideState highway office
Union PacificRailroad5.07 track miles insideThe railroad
Dry CreekStream3.19 channel miles insideChecked for Corps of Engineers jurisdiction
Court BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 5.07 track miles inside Quail Creek, and public mapping shows 2 street and rail crossings in the community. A line beneath those tracks needs an agreement with the railroad; its terms set crossing conditions. Dry Creek runs for 3.19 channel miles, and public mapping shows 3 streets crossing named streams. A Dry Creek bore needs planning for the channel and a check for U.S. Army Corps of Engineers jurisdiction. For Quail Creek planning, no lakes or ponds are mapped within one mile, a useful constraint when reviewing the bore route.

Who approves a Quail Creek bore in Victoria County?

Quail Creek has no city government, so street control and permits belong to Victoria County or the state, depending on the road. US 77, US 59 Business and US 59 are state highways, and work in their right of way needs a TxDOT utility permit. The TxDOT Yoakum District reviews the application. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. A Union Pacific track crossing needs an agreement with the railroad, and Dry Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Quail Creek Municipal Utility District?

Quail Creek Municipal Utility District operates a groundwater well system serving 1,944 people through 648 service connections. That makes its water lines a key locate and potholing concern on routes near the district. AEP Texas Central, Guadalupe Valley Electric Cooperative and Victoria Electric Cooperative report electric service in Victoria County. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near the water system.

Line ownerWhat it isSourceSize
Quail Creek Municipal Utility DistrictPublic water systemGroundwater wells648 connections, 1,944 people served
AEP Texas Central, Guadalupe Valley Electric Cooperative and Victoria Electric CooperativeElectric utilities reporting service in Victoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Quail Creek’s median housing year at 1995; 2 percent of units were built before 1960, 66 percent from 1960 to 1999 and 32 percent in 2000 or later. That mix can mean either replacing older lines or adding service to newer housing. Near Old Goliad Road, we hydrovac marked utilities on the bore path before drilling close to them, since surface paint does not show depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Quail Creek in relation to Bloomington?

Quail Creek is in Victoria County, 6.9 miles southwest of Victoria, the county seat and nearest larger city. The mapped community covers 3.08 square miles at an elevation of 112 feet, and its ZIP code is 77905. Bloomington is 14.1 miles southeast, Placedo is 16.8 miles east, Inez is 19.1 miles east and Goliad is 20.0 miles west. From our Yukon, Oklahoma main office, Quail Creek is 506 road miles and a 10.2 hour drive, which affects mobilization for work near US 77.

Places near Quail Creek

Which Quail Creek jobs call for a bore near Industrial Park Drive?

  • Highway crossing: A bore beneath US 77 can keep the road surface intact, with the utility owner arranging the TxDOT right of way permit.
  • Street crossing: On Old Goliad Road, a bore can pass below the pavement while marked utilities are exposed before drilling approaches them.
  • Rail crossing: A line beneath Union Pacific track needs a railroad agreement and a plan suited to the crossing conditions.
  • Creek crossing: A Dry Creek bore needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Water service: Work near Quail Creek Municipal Utility District lines starts with locating and exposing marked lines along the planned route.
  • Conduit bore: Industrial Park Drive can be a route for electric conduit or fiber, with the electric line owner confirmed before conduit planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Quail Creek quote for work near Dry Creek?

For a Quail Creek quote, share the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us place the route against Dry Creek, US 77 or the Union Pacific track. Those details show where a bore may need pits, utility exposure or a crossing plan before we scope the work.

At Quail Creek, soil conditions come first: Telferner ground and sandy clay at about 40 inches can affect reaming and fluid control. The route matters next, especially crossings of US 77, Union Pacific track or Dry Creek, where utilities may need exposure and the crossing plan may take more work. Pipe or conduit size, bore length, pavement, pits and excavator time also affect the scope. Mobilization reflects the 506 road miles from Yukon, and emergency or high profile work can add planning needs.

Questions people ask about boring in Quail Creek

Does Trinity Boring Solutions take directional boring work in Quail Creek, Victoria County, and who staffs it?

Yes. We take directional boring work in Quail Creek, Victoria County, using our own crews or crews working from satellite yards run by vetted drilling contractor partners. We handle Quail Creek projects from the first call through the bore log, whichever crew is on site. Routes near US 77 still need planning around marked utilities and road ownership.

Who approves a Quail Creek bore under US 77, and which state office handles it?

TxDOT handles a bore in the US 77 right of way, with the Yoakum District reviewing the permit. The utility owner submits the application in TxDOT’s RULIS system, and we prepare the bore plan and profile. At Quail Creek, the road owner and exact route determine whether the work falls in the highway right of way.

What does a Quail Creek bore beneath Union Pacific track require?

A bore beneath the Union Pacific track in Quail Creek needs an agreement from the railroad that owns it. The agreement sets crossing conditions, including casing, depth and flagging. Public records map 5.07 track miles inside the community, so the proposed route must be checked against the track before the bore is planned.

Can a Quail Creek line be bored under Dry Creek?

A line can be planned beneath Dry Creek, subject to site conditions and a check for U.S. Army Corps of Engineers jurisdiction. Dry Creek has 3.19 channel miles inside Quail Creek, and mapped street crossings of named streams number 3. We plan the bore depth to stay beneath the channel and protect the banks from open cutting.

Who operates Quail Creek’s public water system, and where does its water come from?

Quail Creek Municipal Utility District runs the public water system, which draws from groundwater wells. Quail Creek’s public water system serves 1,944 people through 648 service connections, figures we consider when planning underground work. Before a bore near district lines, marked utilities on the route need to be exposed so the drill can be guided around them.

Which electric providers should a Quail Creek, Victoria County conduit project check with?

AEP Texas Central, Guadalupe Valley Electric Cooperative and Victoria Electric Cooperative report electric service in Victoria County. That county level reporting does not identify the provider for each Quail Creek address. We confirm the owner of the line on the specific route before planning a conduit bore, including one near Industrial Park Drive.

How much notice does Texas811 need for a Quail Creek bore near Old Goliad Road, and what if marks move?

For a bore near Old Goliad Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Quail Creek work, if the start slips more than 14 days past the original notice, we submit a new request. On Quail Creek work, we refresh marks that wear off or move through Texas811 before continuing.

How far is Quail Creek from Victoria and Trinity’s Yukon main office, and does that affect the job?

Quail Creek is 6.9 miles southwest of Victoria and 506 road miles from our Yukon, Oklahoma main office, a 10.2 hour drive. That distance can affect mobilization for work near US 59 Business or Dry Creek. The route, equipment and site access also shape the schedule and scope.

What affects the cost of directional boring in Quail Creek under US 77?

The job scope determines the price, with Quail Creek’s soil and crossings among the main factors. Telferner soil and sandy clay can affect reaming; a US 77 crossing adds right of way planning, while utilities may require exposure. Pipe size, bore length, pits, pavement, creek or rail crossings and the 506 road miles from Yukon also affect the work.

Where the Quail Creek facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Quail Creek

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Quail Creek, Texas

Type the address of your job in Quail Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Quail Creek

All counties: Texas county list.