trinityboringsolutions.com

Glen Rose Texas Directional Boring: Eckrant Soil, US 67 and Paluxy River

Quick Answer: On Barnard Street and US 67, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility routes beneath pavement. Glen Rose has 63.92 public road miles, and the Paluxy River accounts for 3.49 channel miles within the limits. The Yukon main office is 266 road miles away, so a route near Texas Drive is part of mobilization planning. Eckrant soil and very cobbly clay shape the mapped ground; sticky clay can load a reamer, so we stage the cut and control fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Glen Rose bores at a glance

  • County seat of Somervell County, Texas. Population 3,033 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 266 miles, about 5.2 hours of driving.
  • Ground: Eckrant soil is mapped on 27 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 34 percent of the area.
  • Highways inside the boundary: US 67, Texas State Highway 144, FM 56, FM 205 and FM 200. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Paluxy River, Comanche Creek, Van Zant Branch and Wheeler Branch.
  • Public water: City of Glen Rose, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 67 in Glen Rose?

Trinity Boring Solutions takes directional boring work in Glen Rose, Somervell County, including routes beneath Barnard Street and along US 67. The Census Bureau Vintage 2024 estimate puts the city population at 3,033. We install water and sewer lines beneath streets, gas lines and electric conduit along road corridors, and fiber routes where a path can be bored without opening the surface.

Our main office is in Yukon, Oklahoma, and Glen Rose work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring since 1982 means four decades of adjusting our approach to ground like Glen Rose’s Eckrant soil, where cobbles and shallow bedrock can affect the drill path. We stay involved from the first call through the bore log.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Glen Rose have around Eckrant soil?

The USDA soil survey maps Eckrant soil across 27% of Glen Rose, with very cobbly clay mapped as the surface texture across 27% of the city. At about 40 inches below the surface, bedrock is the leading mapped texture at 33%, while loam accounts for 26% and sandy clay loam for 13%. Average clay content there is 28%. These are mapped soil patterns, not test borings; the cobbly clay and clay layers can hold an open hole but may stick to a reamer.

USDA soil survey, inside the Glen Rose city limitsWhat is mapped
Soil series mappedEckrant 27 percent, Venus 26 percent, Bastrop 11 percent, Krum 7 percent and Granbury 5 percent
Texture at the surfaceloam 30 percent, very cobbly clay 27 percent and fine sandy loam 17 percent
Texture about 40 inches downbedrock 33 percent, loam 26 percent and sandy clay loam 13 percent
Engineering class about 40 inches downlean clay (CL) 46 percent, fat clay (CH) 12 percent and silty clay (CL ML) 4 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches34 percent of the area (34 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel39 percent of the area

Bedrock is mapped within 60 inches across 34% of Glen Rose, and hard bedrock is mapped across the same share; weathered bedrock is not mapped in that depth range. Seasonal water table soils are not mapped, while flood prone soils cover 10%, so Paluxy River crossings need depth planning. High steel corrosion risk is mapped across 39%, a concern for uncoated steel casing and tracer wire. The map includes Quaternary terrace deposits and Early Cretaceous sedimentary rock, which can mean changing material along a bore.

How do crews bore through Glen Rose bedrock and clay?

We match the drilling setup to the Glen Rose soil map and the route, since Eckrant’s cobbly clay and shallow bedrock can change how the head tracks.

  1. Eckrant soil includes very cobbly clay, so we check depth and pitch as the drill advances to help keep cobbles from pushing the head off line.
  2. Where Glen Rose’s clay holds the hole and sticks to the reamer, we use controlled fluid, ream in stages and prepare the pipe for the pull.
  3. With bedrock mapped in parts of the city within 60 inches, we allow for slower drilling and adjust tooling if the route meets harder rock.
  4. Before a bore near Barnard Street, we expose each marked utility along the path with hydrovac; surface paint shows position, not depth.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What does a bore have to cross near Barnard Street in Glen Rose?

Glen Rose bores may cross US 67, Texas State Highway 144, FM 56, FM 205, FM 200 or FM 201, all mapped inside the city limits. Barnard Street is the longest named street at 4.11 miles; Texas Drive and Bo Gibbs Boulevard are also among the longest. A route on any of these roads needs a profile that accounts for pavement, access and marked utilities. Boring can leave the roadway surface uncut while the pits sit in dirt at either end.

CrossingTypeMapped extentWho has a say
US 67US highway5 roadway miles insideState highway office
Texas State Highway 144State highway4.7 roadway miles insideState highway office
FM 56State highway2.2 roadway miles insideState highway office
FM 205State highway1.6 roadway miles insideState highway office
FM 200State highway0.5 roadway miles insideState highway office
FM 201State highway0.4 roadway miles insideState highway office
Paluxy RiverStream3.49 channel miles insideChecked for Corps of Engineers jurisdiction
Comanche CreekStream1.52 channel miles insideChecked for Corps of Engineers jurisdiction
Van Zant BranchStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Wheeler BranchStream1.04 channel miles insideChecked for Corps of Engineers jurisdiction
Montgomery BranchStream0.71 channel miles insideChecked for Corps of Engineers jurisdiction
Cross BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Glen Rose or within one mile outside the limits, and no street and rail crossings are mapped. The Paluxy River runs 3.49 channel miles in the city; Comanche Creek adds 1.52 miles, and 17 street crossings of named streams are mapped. For underground work near Paluxy River, we plan around stream conditions; no lakes or ponds are mapped within one mile. For a river or creek route, we plan to stay beneath the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who approves a bore under roads in Somervell County near Glen Rose?

For Glen Rose work in US 67, Texas State Highway 144 or an FM road right of way, the utility owner applies for a TxDOT utility permit through RULIS, with the TxDOT Fort Worth District reviewing it. We prepare the bore plan and profile for the utility owner’s application and work under its permit. At a highway crossing, the required cover depends on the line: electric and communications, water and pressurized sewer each have specified depths, and the permit may set another depth. Existing highway pavement is bored or tunneled beneath, with the crossing encased. City streets such as Barnard Street belong to the incorporated city. Paluxy River and creek routes are checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Glen Rose system?

The City of Glen Rose public water system uses purchased surface water and reports 1,569 service connections serving 2,848 people. That network makes address level utility checks important before a new route is planned near Barnard Street. Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative Service report electric service in Somervell County; we confirm the line owner for the specific location before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of Glen RosePublic water systemSurface water bought from another system1,569 connections, 2,848 people served
Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative ServiceElectric utilities reporting service in Somervell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Glen Rose’s median housing year at 1988: 28% of homes were built before 1960, 32% from 1960 to 1999 and 40% in 2000 or later. That mix can mean replacing older lines as well as adding service to newer properties along roads such as Van Zandt Road. Before drilling near a marked line, we hydrovac pothole it to verify its location and depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Glen Rose in relation to Pecan Plantation?

Glen Rose is the Somervell County seat, covers 4.0 square miles and sits at 622 feet elevation. We verify that Glen Rose addresses use ZIP codes 76043 and 76077 before planning a bore near US 67. Pecan Plantation is 9.8 miles northeast, and Canyon Creek is 10.0 miles north; Granbury is 12.9 miles north. Pecan Plantation is the nearest larger city listed. From the Yukon, Oklahoma main office, Glen Rose is 266 road miles and a 5.2 hour drive, a distance that affects how we plan mobilization for a route near US 67.

Places near Glen Rose

What boring work comes up near the Paluxy River in Glen Rose?

  • Highway crossing: A route beneath US 67 needs a bore profile, cover planning and a path that extends under the travel lanes.
  • Water service: A connection near the City of Glen Rose system can follow a street route after nearby marked lines are exposed.
  • Fiber conduit: A run along Barnard Street can pass beneath pavement, keeping the surface cut free while entry and exit pits sit off the road.
  • Creek crossing: A bore near the Paluxy River needs a planned depth below the channel and a check for federal waterway jurisdiction.
  • Street route: A line near Texas Drive can be bored around marked utilities, with hydrovac potholes confirming their location before drilling.
  • Acreage service: A route toward Pecan Plantation can be scoped for its footage, pipe size and ground conditions before mobilization from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Van Zandt Road in Glen Rose?

A map pin near Van Zandt Road matters because a short shift in the route can change which marked utilities or stream crossings need attention. For a Glen Rose quote, send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the proposed route meets nearby streets and the Paluxy River.

In Glen Rose, ground conditions are the first price consideration: Eckrant’s cobbly clay, mapped bedrock and possible changes in material can affect tooling and reaming. The number and depth of utilities to expose also matter, along with pavement or concrete, pits, excavator time and sand backfill. A crossing under US 67 or a Paluxy River route adds specific planning needs, while mobilization reflects the 266 road miles from Yukon. On FM 56, high profile or emergency work can change the scope, so we adjust our bore plan as needed.

Questions people ask about boring in Glen Rose

Does Trinity take directional boring jobs in Glen Rose and Somervell County?

Yes, we take directional boring work in Glen Rose and across Texas, including routes near US 67. Our main office is in Yukon, and our crews work from there or from satellite yards operated by partner drilling contractors we have vetted. For a Glen Rose bore near Van Zant Branch, we stay involved from first call through bore log, whichever crew is on site.

Does Eckrant soil in Glen Rose corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 39% of Glen Rose, including areas with Eckrant soil. The line owner should consider the material and coating for steel casing or tracer wire. HDPE is not subject to the mapped soil corrosion concern. The route specific material choice belongs with the line owner.

What ground will a bore pass through in Glen Rose near Eckrant soil?

The USDA soil survey maps Eckrant soil across 27% of Glen Rose, with very cobbly clay mapped over 27% of the surface. At about 40 inches down, bedrock is mapped across 33%, and loam across 26%. Those are regional mapped patterns, not test borings, so the exact conditions along a route near Barnard Street may differ.

Is there rock near the surface in Glen Rose?

Yes, bedrock is mapped within 60 inches across 34% of Glen Rose, and hard bedrock is mapped across 34% at that depth. Weathered bedrock is not mapped within 60 inches. This suggests a bore near US 67 may meet hard material in some locations, but the soil map does not establish conditions at a specific address.

Who approves a Glen Rose bore under US 67, and which TxDOT office reviews it?

The utility owner applies for the permit through TxDOT’s RULIS system, and the TxDOT Fort Worth District reviews a US 67 right of way application in Somervell County. We provide the bore plan and profile for that application and work under the owner’s permit. The permit sets the project requirements, including cover depth.

Can a Glen Rose utility line be bored beneath the Paluxy River?

A bore beneath the Paluxy River can be planned, with the route designed to pass below the channel. The river has 3.49 channel miles within Glen Rose, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. Soil, access and marked utilities also affect the proposed path.

Does Trinity cover Glen Rose, Pecan Plantation and rural sites outside the city?

Yes, Trinity takes work across Texas, including Glen Rose and nearby Pecan Plantation, 9.8 miles northeast of the city. We scope rural routes by their location, footage, pipe size and ground conditions. The Yukon main office is 266 road miles from Glen Rose, which is part of mobilization planning.

How much 811 notice is needed for a Glen Rose bore near Barnard Street?

Paint near Barnard Street shows a marked line’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the notice, make a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of directional boring in Glen Rose under US 67?

The Glen Rose route and ground set the scope: Eckrant’s cobbly clay and mapped bedrock can affect drilling time, and the number of utilities to expose matters. US 67 pavement, creek crossings, pits, backfill and equipment time also factor in. Mobilization from Yukon is considered because the main office is 266 road miles away.

Where the Glen Rose facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Glen Rose

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Glen Rose, Texas

Type the address of your job in Glen Rose. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Glen Rose

All counties: Texas county list.