Kress Texas Directional Boring: Pullman Clay Loam, US 87 and BNSF Railway
Quick Answer: Can you get a line under a Kress road or BNSF Railway track without cutting it? Yes: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Kress, Texas, including routes beneath US 87 and BNSF Railway tracks. Kress is 318 road miles from our Yukon, Oklahoma main office, and the 0.98 track miles of BNSF Railway inside town make rail coordination part of the plan. Pullman clay loam dominates the mapped ground; sticky clay can load a reamer, so we stage the cut and control fluid pressure.
Kress bores at a glance
- Incorporated city in Swisher County, Texas. Population 592 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 318 miles, about 5.9 hours of driving.
- Ground: Pullman soil is mapped on 93 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 87, FM 145 and Loop 292. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: BNSF Railway, with 4 mapped street and rail crossings.
- Public water: Kress Municipal Water System, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Kress, Swisher County?
We take directional boring work in Kress, Swisher County, where the Census Bureau Vintage 2024 estimate puts the population at 592. Can you get a line under a Kress road or track without cutting it? We install water, sewer, gas, electric conduit and fiber beneath streets such as Main Street or across the BNSF Railway route, with the plan set for the specific crossing.
Our main office is in Yukon, Oklahoma, and Kress work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a request for a service line beneath Kress 4th Street is a more compact job, planned around its own route and ground. As a family business started in 1965, we have done directional boring since 1982, bringing that experience to planning work in Kress.

What is Kress ground like for drilling through Pullman soil?
The USDA soil survey maps Kress mostly as Pullman soil, so a bore here is likely to work through clay loam rather than loose sand. Pullman makes up 93% of the mapped soil series, and Pullman clay loam on 0 to 1 percent slopes covers 91% of the mapped area. Surface texture is clay loam across 96% and clay across 4%. About 40 inches below the surface, the mapped texture is clay loam across 93%, with clay across 7%; the average clay content there is 40 percent. For planning directional boring in Kress, these mapped patterns show general conditions, not test borings.
| USDA soil survey, inside the Kress city limits | What is mapped |
|---|---|
| Soil series mapped | Pullman 93 percent, Randall 4 percent and Lofton 3 percent |
| Texture at the surface | clay loam 96 percent and clay 4 percent |
| Texture about 40 inches down | clay loam 93 percent and clay 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 93 percent and fat clay (CH) 7 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 7 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The soil survey does not map bedrock in Kress within the top five feet, but that leaves deeper conditions open. Seasonal water table is mapped within 60 inches across 7% of the area, while flood prone soils are not mapped. High steel corrosion risk covers 100% of the mapped area, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil concern. The geologic map shows Eolian Sheet Sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age, so field conditions still need checking along a Pullman route.
What does it take to bore Kress clay loam?
Kress clay loam can stay around a reamer and grip the pipe, so we match the drilling fluid and reaming pace to the Pullman soil. Main Street pavement also calls for controlled returns and careful utility exposure.
- Fluid plan: Pullman clay loam can cling to the reamer, so we use a thinner fluid mix with polymer and watch returns near Kress pavement.
- Reaming: The heavy mapped clay in Kress calls for staged reaming, which helps manage sticky cuttings and keeps the hole suited to the planned pipe.
- Pullback: We have the pipe ready before the final ream on a Kress route, then pull it the same day so the clay has less time to grip it.
- Utility checks: Near 4th Street, we expose every marked utility on the bore path with hydrovac before drilling close, since locate paint does not give depth.

What might a Kress bore cross near BNSF Railway?
Kress routes can involve US 87, FM 145 or Loop 292, with Interstate 27 just 0.3 miles outside the city limits. A line beneath existing highway pavement calls for boring or tunneling rather than an open cut. Within town, 1st Street runs 1.0 mile, Main Street 0.71 miles and 4th Street 0.67 miles. Dudley Avenue adds another route to consider. We set the bore path and pits to suit the road, access and marked utilities rather than assuming a straight shot.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 2 roadway miles inside | State highway office |
| FM 145 | State highway | 2 roadway miles inside | State highway office |
| Loop 292 | State highway | 0.6 roadway miles inside | State highway office |
| Interstate 27 | Highway nearby | 0.3 miles outside | State highway office |
| BNSF Railway | Railroad | 0.98 track miles inside | The railroad |
BNSF Railway has 0.98 track miles inside Kress, on the Plainview Subdivision, and public mapping shows four street and rail crossings in town. A track route therefore needs railroad coordination before the bore plan is set. No named streams are mapped inside Kress or within one mile outside its limits, and there are no mapped lakes or ponds within one mile. That leaves no mapped creek crossing to plan around, but the railroad and street crossings still shape access and alignment.
Whose approval does a Kress bore under US 87 need?
For work in the US 87 right of way in Kress, the line owner files the utility permit through TxDOT’s online RULIS system, and the TxDOT Lubbock District reviews it. We prepare the bore plan and profile for the owner’s application and work under its issued permit. TxDOT’s cover rules call for 60 inches at highway crossings for electric and communication lines and water lines; along the right of way, the figures are 48 inches for electric and communication and 36 inches for water. Pressurized sewer crossings call for 60 inches, subject to a different depth set in the permit. Kress city streets belong to the city, while BNSF Railway sets its own crossing agreement conditions.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may be near Kress Municipal Water System routes?
The Kress Municipal Water System uses groundwater wells and has 292 service connections serving 493 people. That matters for a nearby service bore because the planned route still needs utility locations before drilling. Southwestern Public Service and Lighthouse Electric Cooperative report electric service in Swisher County; we confirm the line owner for the specific Kress address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Kress Municipal Water System | Public water system | Groundwater wells | 292 connections, 493 people served |
| Southwestern Public Service and Lighthouse Electric Cooperative | Electric utilities reporting service in Swisher County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Kress’s median housing year at 1967; 25% of homes were built before 1960, 72% from 1960 to 1999 and 3% in 2000 or later. A bore near Main Street may serve a replacement for older pipe or a new connection, and those are different scopes. We use hydrovac potholing to expose marked utilities on the route before drilling near them, since paint does not show their depth.

How far is Kress from Plainview and our Yukon yard?
Kress is in Swisher County at an elevation of 3,470 feet, and its incorporated area covers 0.56 square miles. ZIP code 79052 serves Kress, so we use it to identify the area when planning underground work. Edmonson is 10.4 miles southwest, Seth Ward is 10.8 miles south, Tulia is 12.0 miles north, and Plainview is 12.2 miles south. Tulia is the county seat, while Plainview is the nearest larger city. From our Yukon yard, Kress is 318 road miles away and a 5.9 hour drive, which is part of planning mobilization for a US 87 or BNSF Railway crossing.
Places near Kress
- Directional boring in Edmonson: 10.4 miles southwest
- Directional boring in Seth Ward: 10.8 miles south
- Directional boring in Tulia: 12 miles north
- Directional boring in Plainview: 12.2 miles south
- Directional boring in Hart: 20.9 miles west
What kinds of bores come up in Kress near 4th Street?
- Highway crossing: A line beneath US 87 needs a bore plan suited to TxDOT right of way and the pavement crossing.
- Rail crossing: A route beneath the BNSF Railway track in Kress needs railroad coordination for its crossing conditions.
- Water service: A connection near the Kress Municipal Water System can be routed beneath a street without opening the whole paved run.
- Street replacement: A sewer or water line beneath Main Street can avoid an open cut while the marked utilities are exposed first.
- Fiber conduit: A conduit route along 4th Street can be planned around its pavement, existing services and the Pullman clay loam.
- Regional connection: A route toward Plainview can be scoped for its footage, pipe size and the mobilization from Yukon.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Kress quote near Dudley Avenue?
For a Kress quote, send the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help us read the route near Dudley Avenue. Those details show whether the job is a service, a street crossing or a longer run, and where we need to check access and existing lines.
The price reflects the ground, crossings and logistics of the Kress job. Pullman clay loam can mean staged reaming and more attention to fluid returns. A route beneath US 87 or BNSF Railway brings highway or railroad coordination into the scope, while pavement, concrete and the number of utilities to expose also matter. Pit size, excavator time and sand backfill can change the work. The 318 road miles from Yukon affect mobilization, and high profile or emergency timing can add planning demands.
Questions people ask about boring in Kress
Does Trinity take directional boring jobs in Kress, Swisher County, and how are crews assigned?
Yes, we take directional boring work in Kress, Swisher County. Our own crews handle the work, and partner drilling contractors we have personally vetted operate satellite yards that can support the job. You work with Trinity from the first call through the bore log, whether the route is near Main Street or the BNSF Railway.
Who is responsible for Kress 4th Street, and can a bore avoid cutting it?
Kress is an incorporated city, so its city streets belong to the city itself. A bore beneath 4th Street can avoid cutting the pavement when the route and access suit the work. We check marked utilities and plan entry and exit pits off the travel surface.
How old are Kress homes near Main Street, and does that affect a replacement bore?
The American Community Survey 2019 to 2023 estimates give Kress a median housing year of 1967. Older buried lines near Main Street may call for a replacement route, while a new service has a different connection point and scope. Before drilling close to marked utilities in Kress, we expose them so the bore can be planned around their locations.
Can Pullman soil in Kress corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 100% of Kress, including areas mapped as Pullman soil. The line owner should consider the material and any protection needed for steel casing or tracer wire. HDPE does not share the mapped soil corrosion concern, but the line owner selects the materials.
What ground does a Kress bore pass through in Pullman soil?
The USDA soil survey maps Pullman soil across 93% of Kress, with clay loam across 93% at about 40 inches below the surface. Clay makes up the remaining 7% at that depth, and average clay content is 40 percent. Those are mapped conditions, not a test of the specific route near 4th Street.
Will a directional bore in Kress hit rock?
Bedrock is not mapped within the top five feet in Kress, but that does not rule out deeper rock along a route. The geologic map lists Eolian Sheet Sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age. A bore plan still needs to account for the ground encountered along its path.
What bore sizes and lengths can Trinity handle near Kress Dudley Avenue?
For a route near Dudley Avenue, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The actual size and length depend on the line and site plan. A sketch helps us understand access and the route around Kress streets or crossings.
How much notice does Texas811 need for a Kress bore near 1st Street?
For a bore near 1st Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If work starts more than 14 days after the original notice, file again. If marks are worn or moved in Kress, we have them refreshed through Texas811 before work continues.
What affects the cost of a directional bore under Kress US 87?
The US 87 route is priced by its scope, not by one fixed factor. Pullman clay loam, pipe size and bore length affect the ground work; highway coordination, pavement and utilities to expose affect crossings. Pit work, excavator time, backfill and mobilization from Yukon also matter. Emergency timing or a high profile route can add planning needs.
Where the Kress facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kress
- U.S. Census Bureau, TIGER/Line 2024: Kress boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Kress
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kress housing units and year built
- Macrostrat geologic map compilation: map units under Kress
- U.S. EPA Safe Drinking Water Information System: public water systems serving Kress
- U.S. Department of Transportation, North American Rail Network: track owners in Swisher County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Swisher County
- U.S. Geological Survey, Elevation Point Query Service: Kress elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kress
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kress
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kress, Texas
Type the address of your job in Kress. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kress
Same county: Happy. All counties: Texas county list.
