trinityboringsolutions.com

Aldine Texas Directional Boring: Clodine Soil, Union Pacific and Halls Bayou

Quick Answer: Hardy Road, Aldine Mail Road and Chrisman Road are long local routes; we use directional boring, or horizontal directional drilling (HDD), in Aldine, Texas, to cross them without opening pavement. FM 525 crosses the community, and the Yukon main office is 448 road miles away, shaping mobilization near Union Pacific track. Clodine soil covers 77 percent of mapped ground, and loam at about 40 inches calls for a plan suited to wet soil. Halls Bayou adds a creek crossing to route planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Aldine bores at a glance

  • Unincorporated community in Harris County, Texas. Population 15,999 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 448 miles, about 8.6 hours of driving.
  • Ground: Clodine soil is mapped on 77 percent of the area, with loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Spur 548 and FM 525. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Halls Bayou.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Spur 548 in Aldine?

Hardy Road and FM 525 are among the routes where we can bore water, sewer, gas, electric conduit or fiber lines, keeping a new line beneath the route rather than in its travel surface. The Census Bureau counted 15,999 people in Aldine in the 2020 Census; this unincorporated Harris County community has no city government.

Our main office is in Yukon, Oklahoma, and Aldine work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We take on work from a 3/4 inch service line to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982; Aldine’s mix of older streets and routes such as FM 525 can call for either scale.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Aldine ground like to bore through Clodine soil?

The USDA soil survey maps Clodine soil across 77 percent of Aldine, with Addicks mapped under 16 percent and Bernard under 6 percent. At the surface, fine sandy loam covers 77 percent of the mapped area, loam 18 percent and clay loam 6 percent. At about 40 inches, the survey maps loam under 94 percent and clay under 6 percent, with average clay content of 18 percent. For Aldine, we treat mapped patterns as planning guidance, not test borings, before setting a bore path. The loam and fine soil can soften when wet, so crews manage drilling fluid to avoid washing out the hole.

USDA soil survey, inside the Aldine mapped community boundaryWhat is mapped
Soil series mappedClodine 77 percent, Addicks 16 percent and Bernard 6 percent
Texture at the surfacefine sandy loam 77 percent, loam 18 percent and clay loam 6 percent
Texture about 40 inches downloam 94 percent and clay 6 percent
Engineering class about 40 inches downlean clay (CL) 84 percent and silty clay (CL ML) 16 percent
Average clay content about 40 inches down18 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches100 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The Lissie Formation, mapped as Pleistocene sand, silt and clay, puts no bedrock marker in Aldine’s upper five feet; deeper rock is not ruled out. The USDA survey maps a seasonal water table within 40 inches across 100 percent of the area, so pits may need pumping and wet ground affects setup. Flood prone soils are not mapped along Halls Bayou, but the channel still needs crossing review. High steel corrosion risk is mapped across 100 percent of Aldine, so the line owner should consider casing and tracer wire materials; HDPE has no soil corrosion concern.

How do crews handle Aldine loam during a bore?

The USDA survey maps loam at about 40 inches across most of Aldine, along with a shallow seasonal water table. We adjust the drilling plan to keep the hole stable and the work area controlled near local streets and drainage.

  1. Because Clodine soil and loam are widespread in Aldine, we control fluid and ream in stages so the hole holds its shape without being washed out.
  2. With a seasonal water table mapped within 40 inches across Aldine, crews keep pits manageable and pump water when it collects near a Hardy Road bore.
  3. Before drilling near a marked line on Aldine Mail Road, we hydrovac pothole to expose it; surface marks show position but not depth.
  4. For an Aldine route in an area with mapped high steel corrosion risk, the line owner selects suitable casing and tracer wire materials, or considers HDPE.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line in Aldine near Hardy Road?

Spur 548 and FM 525 run inside Aldine, while Loop 8 touches the mapped community boundary. Interstate 45 and Texas State Highway 249 are each 0.2 miles outside it. Hardy Road is the longest named street in the community at 4.53 miles; Aldine Mail Road runs 2.72 miles and Chrisman Road 2.6 miles. Those routes can put pavement and existing services over a proposed path, so a bore plan needs to account for the exact crossing and access for entry and exit pits.

CrossingTypeMapped extentWho has a say
Spur 548State highway5.7 roadway miles insideState highway office
FM 525State highway1.4 roadway miles insideState highway office
Loop 8Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 249Highway nearby0.2 miles outsideState highway office
Interstate 45Highway nearby0.2 miles outsideState highway office
Spur 261Highway nearby1.4 miles outsideState highway office
Union PacificRailroad2.82 track miles insideThe railroad
Halls BayouStream3.69 channel miles insideChecked for Corps of Engineers jurisdiction
Greens BayouStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.82 track miles inside Aldine, and two street and rail crossings are mapped. Any proposed track crossing needs an agreement with Union Pacific that sets the crossing details. Halls Bayou runs 3.69 channel miles through the community, with five mapped street crossings of named streams. A bore route at the bayou needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.

Who approves a bore in Aldine and Harris County?

Aldine is an unincorporated community, so it has no city government to approve its streets; county or state authority depends on the route. For a bore under FM 525, Spur 548 or another state highway, TxDOT Utility Accommodation Rules set cover depths: electric and communication lines need 60 inches at a crossing and 48 inches along the right of way; water needs 60 inches at a crossing and 36 inches along it; pressurized sewer needs 60 inches at crossings. The line owner submits the TxDOT utility permit application through RULIS for review by the Houston District, while we prepare the bore plan and profile. At an Aldine Union Pacific crossing, we obtain the railroad’s agreement before scheduling boring work across its right of way. Halls Bayou is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Harris County and Aldine?

For a bore near Halls Bayou or Hardy Road, the water provider for the specific address has to be confirmed with Harris County or the local water district before a bore is planned. Electric service reported in Harris County includes CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative; that county list does not identify the provider for every Aldine address. We confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
CenterPoint Energy, Entergy Texas and San Bernard Electric CooperativeElectric utilities reporting service in Harris CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Aldine’s median housing year at 1971; 21 percent of homes were built before 1960, 68 percent from 1960 to 1999 and 11 percent in 2000 or later. A replacement bore along Aldine Mail Road may meet older buried services as well as newer connections. Before drilling near a marked line, we use hydrovac potholing to expose it; paint shows its position, not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Aldine and nearby Humble?

Aldine is an unincorporated Harris County community covering 7.87 square miles at an elevation of 78 feet. Its ZIP codes are 77039, 77060, 77037 and 77032. Humble is 8.5 miles northeast, and Houston is 8.8 miles south; Houston is also the county seat and the nearest larger city listed. From our Yukon, Oklahoma main office, Aldine is 448 road miles away, an 8.6 hour drive, so distance is part of planning work near Hardy Road and the Union Pacific track.

Places near Aldine

What boring work comes up in Aldine near Aldine Mail Road?

  • Street crossing: A bore beneath Hardy Road can keep a new water or sewer line out of the pavement.
  • Highway crossing: An FM 525 crossing needs a route planned to meet the TxDOT permit and cover requirements.
  • Utility conduit: A conduit route near Aldine Mail Road starts with confirming the line owner and exposing marked utilities.
  • Creek crossing: A water or sewer bore near Halls Bayou needs channel planning and a jurisdiction check.
  • Rail crossing: A proposed crossing of Union Pacific track needs the railroad’s agreement and its crossing conditions.
  • Service line: A short service bore near Chrisman Road can connect a property without opening the street surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote an Aldine bore near Union Pacific?

A map pin matters near Hardy Road because the exact side of a street or drainage route can change the crossing plan. Send the address or pin, what will go underground, pipe or conduit size and footage; a sketch or plans help us check the proposed route and access for pits.

A short, direct route with clear access can be simpler to plan than a crossing with pavement, tight pits or several marked utilities. In Aldine, Clodine soil and the shallow water table affect drilling and pit work; a route under FM 525 or Union Pacific track adds crossing planning. Price also reflects pipe size, length, exposed utilities, concrete, creek crossings, equipment time and mobilization from Yukon.

Questions people ask about boring in Aldine

Does Trinity Boring Solutions take directional boring work in Aldine and Harris County, and how are crews assigned?

Yes. We take directional boring work across Texas, including Aldine in Harris County. Our crews work from the Yukon main office or from satellite yards run by vetted drilling partners, while you deal with Trinity through the work and bore log. Routes near Hardy Road are planned around the specific site and crossings.

Who owns electric lines in Aldine, Harris County, and who confirms conduit specifications?

The specific line owner must be confirmed before a conduit bore. CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative report electric service in Harris County, but that does not establish which provider serves an address near FM 525. The line owner confirms conduit specifications for its system and the planned work.

Who is responsible for Chrisman Road in Aldine, and does a bore require cutting it?

Aldine has no city government because it is an unincorporated community, so street authority rests with the county or state depending on the road. A bore can pass beneath Chrisman Road without cutting its surface. The authority for that specific segment and any required approval depend on whether it is a county or state route.

How old are buried lines near Aldine Mail Road in Aldine, and what does that mean for replacement bores?

Aldine’s median housing year is 1971 in the American Community Survey 2019 to 2023 estimates, and 21 percent of homes predate 1960. Replacement routes near Aldine Mail Road may encounter older services as well as later connections. We expose marked utilities before drilling close to them, since paint does not show depth.

Can groundwater near Halls Bayou in Aldine affect bore pits or cause flood prone ground?

Yes, a shallow water table can affect pit work: the USDA survey maps it within 40 inches across 100 percent of Aldine. Flood prone soils are not mapped, but a proposed Halls Bayou crossing still needs channel planning and a check for Corps jurisdiction. Crews may need to pump water from pits.

Does Clodine soil in Aldine corrode steel, and what pipe should I use?

The USDA survey maps high steel corrosion risk across 100 percent of Aldine, including areas mapped as Clodine soil. The line owner chooses coatings or other material requirements for steel casing and tracer wire. HDPE is not affected by soil corrosion, but the suitable pipe depends on the line and project specifications.

Can I reach Trinity after hours about an urgent bore near Chrisman Road in Aldine?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423 for urgent work near Chrisman Road or elsewhere in Aldine. We can discuss what is going in the ground, the route and the immediate site conditions, including access and nearby marked utilities.

How much notice does Texas811 need for a bore near Hardy Road in Aldine, and what if marks move?

For a bore near Hardy Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Aldine work, if our start slips more than 14 days past the original notice, we submit a new request. Before we continue an Aldine bore, we refresh worn or moved marks through Texas811.

What affects the cost of directional boring near Spur 548 in Aldine?

The job route and scope set the price, not one factor alone. Length, pipe size, soil, exposed utilities, pavement, pits and equipment time all matter. Near Spur 548, highway crossing requirements can add planning, while Clodine soil and Aldine’s distance from Yukon affect drilling and mobilization. Creek or rail crossings can also change the work.

Where the Aldine facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Aldine

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Aldine, Texas

Type the address of your job in Aldine. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Aldine

Same county: Pasadena · The Woodlands · Baytown · Atascocita · Channelview · La Porte · Mission Bend · Deer Park · Cloverleaf · Cinco Ranch · Bellaire · South Houston. All counties: Texas county list.