Atascocita Texas Directional Boring: Texla Soil, Union Pacific Track And Williams Gully
Quick Answer: Can we put your line beneath Lake Houston Parkway, a Union Pacific track or Williams Gully without cutting the surface? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Atascocita crossings such as those. The Yukon main office is 453 road miles away, and the mapped community includes 5.68 track miles of Union Pacific. Texla soil and silty clay loam can cling to the reamer, so staged passes and a ready pipe matter.
Atascocita bores at a glance
- Unincorporated community in Harris County, Texas. Population 88,174 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 453 miles, about 8.9 hours of driving.
- Ground: Texla soil is mapped on 29 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Loop 8 and FM 1960. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Williams Gully, Garners Bayou and Rockpool Gully.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring under Lake Houston Parkway in Atascocita?
Can we get your line under Lake Houston Parkway, a Union Pacific track or Williams Gully without cutting the surface? Yes, we take directional boring work in Atascocita, an unincorporated community in Harris County. The 2020 Census counted 88,174 people here. We install water, sewer, gas, electric conduit and fiber lines, including service runs beneath named streets or crossings where open cutting would disrupt the route.
Our main office is in Yukon, Oklahoma, and Atascocita work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A typical Atascocita job is shorter, such as taking a service beneath Woodland Hills Drive or a utility crossing near Williams Gully. Our family business began in 1965, and we have done directional boring since 1982 for Atascocita project planning.

What is Texla soil like to bore through in Atascocita?
The USDA soil survey maps Texla as the leading soil series in Atascocita, covering 29% of the mapped area. Sorter accounts for 18%, and Mocarey for 13%. At about 40 inches below the surface, silty clay loam is mapped across 29% of the area, while clay is mapped across 12% and sandy textures across 9%. For Atascocita planning, we treat these as mapped soil patterns, not test borings, when considering underground work. Texla and the deeper clay textures can hold an open hole, but sticky cuttings can build on a reamer and grip pipe.
| USDA soil survey, inside the Atascocita mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Texla 29 percent, Sorter 18 percent, Mocarey 13 percent, Aris 10 percent and Boy 9 percent |
| Texture at the surface | silt loam 41 percent, loam 30 percent and fine sand 9 percent |
| Texture about 40 inches down | silty clay loam 29 percent, loam 15 percent and clay 12 percent |
| Engineering class about 40 inches down | lean clay (CL) 47 percent, fat clay (CH) 23 percent and silt (ML) 18 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 97 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 98 percent of the area |
The USDA soil survey does not map bedrock in the top five feet of Atascocita, which helps with shallow soil bores but does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 97% of the area, so pits near Lake Houston Parkway may need pumping. Flood prone soils cover 1%. High steel corrosion risk is mapped across 98%, a concern for steel casing and tracer wire. The geologic map unit is Delta silt and clay of Pleistocene age, with clay and silt layers that call for attention to fluid returns.
How is a bore run through Atascocita’s silty clay loam?
Atascocita’s silty clay loam can stay open but cling to the reamer. Along streets such as Lake Houston Parkway, we adjust the drilling fluid and reaming sequence to keep the hole workable.
- We use drilling fluid suited to Atascocita’s silty clay loam, then ream in stages so sticky material does not build up around the tool.
- Because seasonal water is mapped within 60 inches across 97% of Atascocita, we keep pits small and pump them when water collects.
- Near a paved stretch of Lake Houston Parkway, we control fluid pressure and watch returns to reduce the chance of lifting the surface.
- Before a bore near Williams Gully, we expose every marked utility on the path, then track the drill head and log depth and pitch.

Where does a line have to go under Union Pacific in Atascocita?
Loop 8 and FM 1960 have mapped roadway segments inside the Atascocita community boundary, so a route crossing either highway needs to account for the state right of way. Lake Houston Parkway runs 6.79 miles within the community, Woodland Hills Drive 6.6 miles and Timber Forest Drive 3.95 miles. Atascocita Road adds another long local route. A bore can pass beneath pavement and driveways without cutting them, but the route and access points must fit the crossing and the nearby buried lines.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Loop 8 | State highway | 0.3 roadway miles inside | State highway office |
| FM 1960 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 5.68 track miles inside | The railroad |
| Williams Gully | Stream | 3.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Garners Bayou | Stream | 1.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rockpool Gully | Stream | 1.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| San Jacinto River | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Jordon Gully | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Houston | Lake or pond | 10,287 acres, inside | Checked for Corps of Engineers jurisdiction |
| Lake Doris | Lake or pond | 29 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 5.68 track miles inside Atascocita, including the Union Pacific Beaumont (Up) Subdivision; public mapping shows 3 street and rail crossings. Williams Gully runs 3.15 channel miles here, and mapped street crossings of named streams total 8. Garners Bayou and Rockpool Gully also cross the community. Lake Houston is inside the boundary and covers 10,287 acres, so a route near its water edge needs its own crossing review.
Who approves a bore in Atascocita and Harris County?
Atascocita has no city government, so a street such as Timber Forest Drive falls under the county or state, depending on the road. For work in the right of way of Loop 8, FM 1960 or another state highway, the utility owner files the TxDOT permit through RULIS and the TxDOT Houston District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. Highway cover depends on the line: electric and communication crossings need 60 inches, water crossings 60 inches and pressurized sewer crossings 60 inches. A Union Pacific track crossing needs an agreement with the railroad. Williams Gully and other water crossings are checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Harris County and Atascocita?
The water provider for a specific Atascocita address needs confirmation with the county or local water district before we plan a bore. EPA drinking water records do not tie providers to this community, so they cannot identify the system for an address. For electric service reported in Harris County, the utilities are CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore near Lake Houston Parkway.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative | Electric utilities reporting service in Harris County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Atascocita’s median housing year at 2005; 63% of homes were built in 2000 or later, and 2% before 1960. That mix can mean a Woodland Hills Drive job serves newer construction or replaces an older line. Before drilling near a marked utility, we expose it with hydrovac potholing. Paint shows the line’s position, not its depth.

Where is Atascocita in relation to Houston?
Atascocita is an unincorporated community in Harris County, 17.7 miles northeast of Houston. Its mapped area covers 23.88 square miles at an elevation of 68 feet. ZIP codes include 77346, 77396, 77338 and 77044. Humble is 4.2 miles west; Sheldon is 9.0 miles southeast, and Crosby is 9.3 miles southeast. Houston is both the county seat and the nearest larger city, 17.7 miles southwest. From our Yukon main office, Atascocita is 453 road miles and an 8.9 hour drive, a distance that affects mobilization.
Places near Atascocita
- Directional boring in Humble: 4.2 miles west
- Sheldon: 9 miles southeast
- Crosby: 9.3 miles southeast
- Barrett: 11.5 miles southeast
- Directional boring in Aldine: 11.8 miles west
- Directional boring in Houston: 17.7 miles southwest
What would we bore beneath Woodland Hills Drive in Atascocita?
- Street crossing: A line beneath Woodland Hills Drive can keep pavement and driveways intact while connecting service along the route.
- Highway crossing: A bore beneath Loop 8 needs a plan for TxDOT right of way and the utility owner’s permit.
- Rail crossing: A route under the Union Pacific Beaumont (Up) Subdivision needs the railroad’s agreement and crossing conditions.
- Creek crossing: A bore beneath Williams Gully can avoid cutting the channel bank, with jurisdiction checked during planning.
- Water service: A line near Lake Houston Parkway needs the provider confirmed for the address before we plan the connection.
- Fiber conduit: A run beneath Timber Forest Drive can cross the street without opening a trench through the pavement.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Loop 8 bore in Atascocita?
For an Atascocita quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Loop 8 or the Union Pacific track needs enough detail to show the crossing, access and nearby utilities, because those features can change the work plan.
The biggest local variable is often the route through Texla soil and silty clay loam, where sticky cuttings can affect reaming and pipe pullback. The number of utilities to expose, plus concrete or pavement along Lake Houston Parkway, also changes the scope. A Union Pacific crossing or drainage work near Williams Gully adds coordination and planning. Pit size, excavator time, backfill, line size and length matter too; mobilization reflects the 453 road miles from Yukon.
Questions people ask about boring in Atascocita
Does Trinity take directional boring jobs in Atascocita and Harris County, and who staffs them?
Yes. We take Atascocita work with our own crews and through satellite yards operated by partner drilling contractors we have vetted. Our main office is in Yukon, and you work with Trinity from the first call through the bore log, regardless of which crew is on site. We plan around local features such as Lake Houston Parkway.
What does an Atascocita bore under Union Pacific track require?
A Union Pacific track crossing needs an agreement with the railroad that owns the track. Atascocita has 5.68 track miles inside the mapped community boundary, so the crossing plan must address the railroad’s conditions. We provide the bore plan and profile for the line owner’s coordination, including a route under the Union Pacific Beaumont (Up) Subdivision.
Can a line be bored beneath Williams Gully in Atascocita?
A bore beneath Williams Gully may be possible, depending on the route and site conditions. The gully runs 3.15 channel miles within Atascocita, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. We also expose marked utilities along the proposed path before drilling near them.
Who owns electric lines in Atascocita and Harris County, and who confirms conduit specs?
CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative report electric service in Harris County, but that does not identify the provider at every Atascocita address. The line owner for the specific location must be confirmed before planning a conduit bore. That owner can confirm the line requirements for a route near Lake Houston Parkway.
Who is responsible for Timber Forest Drive in Atascocita, and must it be cut?
Atascocita is unincorporated and has no city government, so its streets fall under the county or state rather than a city. A bore can pass beneath Timber Forest Drive without cutting the pavement. The road authority depends on the specific route, and a state highway crossing such as Loop 8 follows TxDOT’s permit process.
What do Atascocita homes near Woodland Hills Drive mean for replacement bores?
Atascocita’s median housing year is 2005, and 63% of homes were built in 2000 or later, according to American Community Survey 2019 to 2023 estimates. A replacement route near Woodland Hills Drive may encounter existing utilities, while newer homes may need service extensions. We pothole each marked utility on the bore path before drilling near it.
What bore sizes and lengths can Trinity handle for a job on Atascocita Road?
We size Atascocita boring plans for lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a job along Atascocita Road, the route, line size and soil conditions help determine the equipment and plan. A sketch or plans can clarify crossings and access.
How much 811 notice is needed for a bore along Lake Houston Parkway in Atascocita?
The person arranging a bore along Lake Houston Parkway needs to contact Texas811 at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before. When an Atascocita start slips more than 14 days past the original notice, we make a new request. For work scheduled in Atascocita, we refresh marks that wear off or move through Texas811 before work continues.
What affects the cost of directional boring near Loop 8 in Atascocita?
The route and ground lead the estimate: Texla soil and silty clay loam can affect reaming, while a Loop 8 crossing adds right of way planning. Price also reflects line size and length, marked utilities to expose, pavement, drainage crossings, pits, backfill and excavator time. Mobilization matters because Atascocita is 453 road miles from Yukon.
Where the Atascocita facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Atascocita
- U.S. Census Bureau, TIGER/Line 2024: Atascocita boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Atascocita population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Atascocita housing units and year built
- Macrostrat geologic map compilation: map units under Atascocita
- U.S. Department of Transportation, North American Rail Network: track owners in Harris County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Harris County
- U.S. Geological Survey, Elevation Point Query Service: Atascocita elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Atascocita
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Atascocita
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Atascocita, Texas
Type the address of your job in Atascocita. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Atascocita
Same county: Pasadena · The Woodlands · Baytown · Spring · Channelview · La Porte · Mission Bend · Deer Park · Cloverleaf · Cinco Ranch · Bellaire · South Houston. All counties: Texas county list.
