Annona Texas Directional Boring: Deport Clay, US 82, Hurricane Creek
Quick Answer: Annona is an incorporated town in Red River County, so its local streets, including Main Street, belong to the town. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for routes beneath US 82 and FM 44 in Annona. Annona is 274 road miles from our Yukon, Oklahoma main office, a mobilization detail for work near Old English Road. Deport clay is mapped across 37 percent of town land, and sticky heavy clay calls for staged reaming and close control of drilling fluid.
Annona bores at a glance
- Incorporated city in Red River County, Texas. Population 185 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 274 miles, about 5.3 hours of driving.
- Ground: Deport soil is mapped on 37 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 14 percent of the area.
- Highways inside the boundary: US 82 and FM 44. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Annona, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring beneath US 82 in Annona?
Annona is an incorporated town in Red River County, and its streets, including 2nd Street, belong to the town. The Census Bureau Vintage 2024 estimate puts its population at 185. We install water, sewer, gas, electric conduit and fiber lines; in Annona, those routes could run beneath US 82, FM 44 or a local street, depending on the project.
Our main office is in Yukon, Oklahoma, and Annona work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family business started in 1965, with directional boring added in 1982. For a route near Main Street, our equipment can handle 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

What is Deport soil like to bore in Annona?
Annona ground is mapped mainly as Deport soil, which covers 37 percent of the town, with Wrightsville at 21 percent and Woodtell at 14 percent. The USDA soil survey maps clay at the surface across 51 percent of the area. At about 40 inches below the surface, it maps clay across 86 percent, with clay loam making up the rest. Deport, Wrightsville, Woodtell, and Burleson map soil patterns for Annona, not test borings, so we verify ground conditions before boring. Heavy clay can cling to a reamer and grip the pipe, so the drilling plan must account for sticky cuttings.
| USDA soil survey, inside the Annona city limits | What is mapped |
|---|---|
| Soil series mapped | Deport 37 percent, Wrightsville 21 percent, Woodtell 14 percent, Burleson 9 percent and Ashford 6 percent |
| Texture at the surface | clay 51 percent, silt loam 21 percent and fine sandy loam 14 percent |
| Texture about 40 inches down | clay 86 percent and clay loam 14 percent |
| Engineering class about 40 inches down | fat clay (CH) 79 percent and silt (ML) 21 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | 14 percent of the area (0 percent hard rock, 14 percent weathered rock) |
| Seasonal water table within 60 inches | 64 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 14 percent of Annona, with a typical depth of 45 inches; hard bedrock is not mapped within that depth. Seasonal water is mapped within 60 inches across 64 percent, while flood prone soils cover 5 percent. That wet ground can fill pits and needs pumping. High steel corrosion risk is mapped across 100 percent, so casing and tracer wire materials need attention. The Marlbrook Marl, a Late Cretaceous unit of clay and limestone, is mapped in the area.
How do we drill through Annona clay?
In Annona’s heavy clay, we manage sticky cuttings and fluid pressure rather than force the reamer through. The mapped seasonal water near 2nd Street also affects pit setup and the pace of work.
- Deport soil covers 37 percent of Annona, so we ream in stages and keep the pipe ready to pull before the heavy clay can swell around it.
- Clay is mapped at 86 percent of the area about 40 inches down; we use controlled fluid and watch returns to avoid lifting pavement near US 82.
- Seasonal water is mapped within 60 inches across 64 percent of town, so we keep pits small and pump water where Old English Road access allows.
- Before drilling near Ernest Boulevard, we hydrovac each marked utility on the route; a surface locate shows position, not burial depth.

Which roads or creeks could an Annona bore cross near Hurricane Creek?
Annona’s mapped road network includes US 82 and FM 44, each with 1.2 roadway miles inside town limits. Old English Road is the longest named street at 0.88 miles, followed by Main Street at 0.66 miles and 2nd Street at 0.58 miles. Ernest Boulevard measures 0.48 miles. A route beneath an existing highway is bored or tunneled rather than trenched through its pavement, and the specific alignment determines which streets or right of way are involved.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 82 | US highway | 1.2 roadway miles inside | State highway office |
| FM 44 | State highway | 1.2 roadway miles inside | State highway office |
| Hurricane Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Kickapoo Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| White Rock Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Annona or within one mile outside its limits, and no street and rail crossings are mapped in town. Hurricane Creek runs along or touches the boundary; Kickapoo Creek is 0.2 miles away and White Rock Creek is 1.0 mile away. No named stream crossing by a town street is mapped. The survey also maps 1.53 miles of unnamed drainage in town, but no lakes or ponds within one mile.
Whose permission does an Annona bore in Red River County need?
Annona’s incorporated streets, such as Old English Road, belong to the town, while work on US 82 or FM 44 right of way needs a TxDOT utility permit. The line owner submits the application through TxDOT’s RULIS system, and the TxDOT Paris District reviews it; we prepare the bore plan and profile for the owner’s filing. TxDOT cover rules call for 60 inches below the lowest crossed grade for electric and communication lines, and 60 inches for water and pressurized sewer crossings. Hurricane Creek is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Annona water system?
The City of Annona public water system uses purchased surface water and reports 113 service connections serving 339 people. For a water bore near Main Street, that system’s lines need to be located and exposed before drilling nearby. Electric service reported in Red River County includes Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Lamar County Electric Cooperative Association. We confirm the line owner for an address before planning electric conduit.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Annona | Public water system | Surface water bought from another system | 113 connections, 339 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Red River County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Annona’s median housing year at 1979; 16 percent of units predate 1960, 70 percent date from 1960 to 1999, and 14 percent are from 2000 or later. That mix can mean either replacing an older service or adding a newer one near Ernest Boulevard. Before the drill approaches marked utilities, we hydrovac pothole each one on the route; paint shows position, not depth.

Do you cover Annona and nearby Avery?
Annona is in Red River County at an elevation of 374 feet, and the town covers 0.8 square miles in ZIP code 75550. Avery is 7.9 miles east; Clarksville, the county seat, is 8.5 miles west. De Kalb is 17.8 miles east, while Mount Pleasant, the nearest larger city, is 29.5 miles south. Our Yukon, Oklahoma main office is 274 road miles away, a drive of 5.3 hours, which affects mobilization for work near FM 44.
Places near Annona
- Directional boring in Avery: 7.9 miles east
- Directional boring in Clarksville: 8.5 miles west
- Directional boring in De Kalb: 17.8 miles east
- Directional boring in Talco: 18.6 miles southwest
- Directional boring in Bogata: 19 miles southwest
- Directional boring in Mount Pleasant: 29.5 miles south
What kinds of bores come up in Annona near Old English Road?
- Highway crossing: A bore beneath US 82 keeps the line below the roadway instead of opening a trench through its pavement.
- Water service: A connection near the City of Annona system needs its existing water line located before the drill approaches the route.
- Fiber route: A fiber conduit along Main Street can be installed underground with entry and exit pits set off the pavement.
- Creek crossing: A route near Hurricane Creek needs depth and alignment planning, with waterway jurisdiction checked during planning.
- Street service: A water or sewer line along 2nd Street can pass below the road surface without cutting the street.
- Acreage connection: A line reached from Old English Road may need a longer bore, with access and mobilization considered from Yukon.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of Annona boring near Ernest Boulevard?
A map pin matters near Ernest Boulevard because the exact route shows whether the bore meets a street, US 82 right of way or drainage. Send the address, what will go underground, the pipe or conduit size and footage. A sketch or plans help us set the alignment and identify access for the entry and exit pits.
A short route through Deport clay with no pavement or creek crossing is simpler to plan than a long bore under US 82. Price also reflects pipe size, soil or rock, utilities that must be exposed, concrete or pavement, drainage crossings, pits, excavator time and sand backfill. Annona’s 274 road miles from Yukon affect mobilization, and high profile or emergency work can change the demands on a bore near Hurricane Creek.
Questions people ask about boring in Annona
Does Trinity take directional boring work in Annona and Red River County, and how is it staffed?
Yes. We take directional boring work in Annona, with our own crews and satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew arrives from Yukon or a partner yard. A route near US 82 can be scoped from a map pin and plans.
Who approves a bore under US 82 in Annona, and which state office reviews it?
The line owner applies for the right of way utility permit, and TxDOT’s Paris District reviews the US 82 application through RULIS. We prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT requires boring or tunneling beneath existing highway pavement, with crossing cover set by line type and permit conditions.
Can a line be bored beneath Hurricane Creek near Annona?
A bore may be planned beneath Hurricane Creek, which runs along or touches Annona’s boundary, but the route and depth must fit the site. Waterway jurisdiction is checked during planning. The USDA survey maps 5 percent of town land as flood prone, so channel depth and wet ground matter when choosing pits and the bore profile.
Who runs Annona’s public water system, and is its water purchased surface water?
For US 82 boring, we account for the City of Annona owning its public water system and using purchased surface water. Public records list 113 service connections serving 339 people. If a proposed water bore approaches a line near Main Street, we need the existing route exposed before drilling close to it.
Which electric companies report service in Annona and Red River County, and who confirms conduit specs?
Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Lamar County Electric Cooperative Association report electric service in Red River County. Those records do not identify the provider at every Annona address. We confirm the line owner before planning conduit near 2nd Street and verify the conduit requirements with that owner.
Who is in charge of Annona streets like 2nd Street, and does a bore require cutting pavement?
Annona is incorporated, so 2nd Street belongs to the town. A directional bore can pass beneath the pavement without cutting a trench across it; pits are placed in the ground at the bore ends. The exact alignment still needs to account for marked utilities and access along the street.
How far is Annona from the Yukon office, and does Mount Pleasant change the job plan?
Annona is 274 road miles and a 5.3 hour drive from our Yukon, Oklahoma main office, so we plan FM 44 work accordingly. Mount Pleasant is 29.5 miles south of town, but the job location and access determine mobilization. A route near FM 44 or Old English Road needs its own site details before we can plan equipment and pits.
How much notice does Texas811 need for boring on Old English Road in Annona, and what happens to worn marks?
For a bore on Old English Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If our start for TxDOT Paris District work slips more than 14 days past the original notice, we submit a new request. For boring near Kickapoo Creek, we refresh worn or moved marks through Texas811 before work continues.
What affects the cost of directional boring under US 82 in Annona?
The cost depends on the route, pipe or conduit size, footage, soil, pavement and the number of utilities to expose. A US 82 crossing can add permit and cover planning, while Deport clay may call for staged reaming. Creek or drainage crossings, pits, excavator time, backfill, emergency timing and the 274 road miles from Yukon also affect the work.
Where the Annona facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Annona
- U.S. Census Bureau, TIGER/Line 2024: Annona boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Annona
- U.S. Census Bureau, American Community Survey 2019 to 2023: Annona housing units and year built
- Macrostrat geologic map compilation: map units under Annona
- U.S. EPA Safe Drinking Water Information System: public water systems serving Annona
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Red River County
- U.S. Geological Survey, Elevation Point Query Service: Annona elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Annona
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Annona
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Annona, Texas
Type the address of your job in Annona. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Annona
Same county: Detroit · Deport. All counties: Texas county list.
