trinityboringsolutions.com

Avery Texas Directional Boring: Kullit Clay, US 82 and Mill Creek

Quick Answer: From our Yukon, Oklahoma office, 282 road miles from Avery, our own crews and vetted partner crews take directional boring and horizontal directional drilling (HDD) work for routes beneath US 82. The work can carry water, sewer, gas, electric conduit or fiber. Kullit soil covers 53% of mapped land, and clay at about 40 inches can cling to a reamer and grip pipe. Near Mill Creek, we plan the bore and pull around those ground conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Avery bores at a glance

  • Incorporated city in Red River County, Texas. Population 447 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 282 miles, about 5.5 hours of driving.
  • Ground: Kullit soil is mapped on 53 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 21 percent of the area.
  • Highways inside the boundary: US 82, US 82 Business and FM 911. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mill Creek.
  • Public water: City of Avery, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near US 82 in Avery?

At 282 road miles from our Yukon yard, Avery directional boring is handled by our own crews and vetted partner crews along US 82. Red River County’s Avery had a Census Bureau Vintage 2024 estimate of 447 people. Water, sewer, gas, electric conduit and fiber routes may follow US 82, Austin Street or Texas Avenue, where a bore can carry a line beneath the roadway.

Our main office is in Yukon, Oklahoma, and Avery work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have worked in directional boring since 1982. Our range from 3/4 inch service lines to 48 inch casing fits routes such as water or fiber along US 82.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Kullit soil affect boring in Avery?

Kullit is the leading mapped soil series in Avery, covering 53% of the area in the USDA soil survey. The survey maps fine sandy loam at the surface across 89% of the town, but conditions change lower down. At about 40 inches, clay is mapped in 62% of the area, clay loam in 22%, and sandy clay loam in 12%; average clay content there is 40%. With Kullit among Avery’s soil series, we do not map sandy ground at that depth. That clay can stick to a reamer and grip pipe, so the drilling fluid and reaming sequence matter.

USDA soil survey, inside the Avery city limitsWhat is mapped
Soil series mappedKullit 53 percent, Woodtell 21 percent, Bernaldo 12 percent and Annona 8 percent
Texture at the surfacefine sandy loam 89 percent and loam 8 percent
Texture about 40 inches downclay 62 percent, clay loam 22 percent and sandy clay loam 12 percent
Engineering class about 40 inches downfat clay (CH) 83 percent and lean clay (CL) 12 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches21 percent of the area (0 percent hard rock, 21 percent weathered rock)
Seasonal water table within 60 inches56 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel84 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches in 21% of Avery, with a typical depth of 45 inches; hard bedrock is not mapped within that depth. A seasonal water table is mapped within 40 inches across 56% of the area, so Austin Street bore pits may need pumping. Flood prone soils cover 1%. High steel corrosion risk is mapped across 84%, which makes casing and tracer wire material a line owner decision. The map units include Cenozoic terrace deposits and Late Cretaceous sedimentary ground, a mix that can include sand, clay, gravel, chalk and mud.

What does it take to bore clay in Avery?

We bore Avery’s clay by managing fluid and reamer buildup in Kullit soil, with Austin Street access shaping the setup rather than an open cut across the roadway.

  1. In Kullit soil, clay can cling to the reamer, so we use a thinner fluid mix and step through reaming stages before pulling pipe the day the hole is opened.
  2. With Avery’s mapped clay content averaging 40% at about 40 inches, we watch fluid returns closely so pressure does not lift pavement beside US 82.
  3. Before the drill approaches a marked utility, we expose it with hydrovac potholing; paint along FM 911 shows the line’s position, not its depth.
  4. For a marked line beneath Austin Street, a hydrovac pothole confirms its depth before we set the path; a walkover locator tracks the head and records depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross near Mill Creek in Avery?

Avery bores may pass beneath US 82, US 82 Business or FM 911, the highways mapped inside town limits. Austin Street is the longest named street at 1.15 miles, followed by Utah Street at 0.83 miles and Ft Worth Street at 0.76 miles. Texas Avenue adds another named route through town. On a highway route, boring can keep the pavement intact; the path and pits still need to fit the specific right of way and nearby streets.

CrossingTypeMapped extentWho has a say
US 82US highway2.2 roadway miles insideState highway office
US 82 BusinessUS highway0.8 roadway miles insideState highway office
FM 911State highway1.8 roadway miles insideState highway office
Mill CreekStream0.44 channel miles insideChecked for Corps of Engineers jurisdiction
Young CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad or street and rail crossing is mapped in Avery, so a track route is not part of the mapped local crossing picture. Mill Creek runs 0.44 channel miles inside town, and one mapped street crossing meets a named stream. With Mill Creek mapped as a stream, we have no lakes or ponds mapped within one mile to account for in bore planning. A Mill Creek crossing needs a planned profile that stays beneath the channel, and its possible U.S. Army Corps of Engineers jurisdiction is checked during planning.

Whose permission does a bore need in Avery and Red River County?

A bore in Avery needs TxDOT review when it occupies the US 82 right of way, while Austin Street and Texas Avenue are city streets. Avery is incorporated, so its streets belong to the town rather than Red River County. For US 82, US 82 Business or FM 911 right of way, the utility owner applies through TxDOT’s RULIS system and the TxDOT Paris District reviews it. We prepare the bore plan and profile for that filing and work under the owner’s permit. Existing highway pavement is bored or tunneled, and a Mill Creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near City of Avery in Avery?

The City of Avery public water system uses purchased surface water and serves 408 people through 256 service connections. That gives a water bore a local system to coordinate with, but the exact line owner still needs to be confirmed. Utilities reporting electric service in Red River County include Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Lamar County Electric Cooperative. We confirm the owner for the specific route before planning an electric conduit bore near US 82.

Line ownerWhat it isSourceSize
City of AveryPublic water systemSurface water bought from another system256 connections, 408 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Red River CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Avery’s median housing year at 1983; 11% of homes were built before 1960, 76% from 1960 to 1999 and 13% in 2000 or later. That mix can mean either a replacement line or a newer service, including along Utah Street. Before the drill nears a marked utility, we expose it with hydrovac potholing because locate paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Avery and Annona?

Avery is in Red River County at an elevation of 469 feet, within 0.95 square miles of land and ZIP code 75554. Annona is 7.9 miles west, while De Kalb is 9.9 miles east; Clarksville, the county seat, is 16.4 miles west. New Boston is 21.7 miles east and Talco is 22.7 miles southwest. The nearest larger city, Mount Pleasant, is 29.4 miles southwest. Our Yukon yard is 282 road miles away, about a 5.5 hour drive, so that trip is part of planning a bore in Avery.

Places near Avery

What boring work comes up on Austin Street in Avery?

  • Highway crossing: A route under US 82 needs a bore profile that clears the travel lanes while keeping the existing pavement uncut.
  • Water service: A connection near the City of Avery water system can be bored beneath Texas Avenue instead of trenching across the roadway.
  • Fiber route: A fiber conduit along Austin Street can pass beneath driveways and pavement, with marked utilities exposed before drilling near them.
  • Creek crossing: A Mill Creek bore needs a planned path below the channel and a jurisdiction check during planning.
  • Electric conduit: Near FM 911, we confirm the line owner and locate marked utilities before setting the conduit route.
  • Replacement service: Along Utah Street, a replacement water or sewer line can be bored beneath the street surface rather than opened across it.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Texas Avenue in Avery?

To quote an Avery bore, send a map pin so we can see whether the route sits by Texas Avenue, US 82 or Mill Creek. Tell us what goes underground, the pipe or conduit size and the footage. A sketch or plans help us see the entry and exit pits, pavement and any marked crossings along the route.

The price follows the work at the specific Avery site. Mobilization reflects the 282 road miles from Yukon, while Kullit clay can affect drilling and reaming time. A route beneath US 82 brings right of way and pavement details into the plan; a Mill Creek crossing adds creek and drainage considerations. We also account for line exposures, pipe size and length, pits, excavator time, sand backfill, and any high profile or emergency work.

Questions people ask about boring in Avery

Does Trinity Boring Solutions take directional boring jobs in Avery, Red River County, and how are they staffed?

Yes, we take directional boring work in Avery, with our own crews and vetted partner drilling crews handling jobs in Red River County. From the first call through the bore log, we coordinate with you on Austin Street crossings, whichever crew is on site. A route near US 82 can be planned around its road and utility crossings.

What do Avery’s older homes along Utah Street mean for replacement bores?

Avery’s housing includes older homes as well as newer services, so a replacement bore may need to meet existing lines while a new service follows a different route. The American Community Survey 2019 to 2023 estimates put the median housing year at 1983, with 11% built before 1960. Along Utah Street, we expose marked utilities before drilling near them.

Can groundwater or flood prone ground affect bore pits near Mill Creek in Avery?

It can affect pit planning near Mill Creek: the USDA soil survey maps a seasonal water table within 40 inches across 56% of Avery, while flood prone soils cover 1%. We plan for compact pits and pumping where needed, and keep a creek bore below the channel. Mill Creek crossing jurisdiction is checked during planning.

Does Kullit soil in Avery corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 84% of Avery, including areas mapped as Kullit soil. HDPE is not affected by soil corrosion, while the line owner chooses suitable coatings for steel casing or tracer wire. The actual pipe choice depends on the line and route near features such as US 82.

What ground does a bore pass through in Avery’s Kullit soil?

Kullit is mapped across 53% of Avery, and the USDA soil survey shows fine sandy loam at the surface across 89% of the town. At about 40 inches, clay is mapped in 62% of the area and clay loam in 22%. That sticky ground can build up on a reamer, so staged reaming helps on an Austin Street route.

Is bedrock mapped within five feet in Avery, and is it hard or weathered?

Weathered bedrock is mapped within 60 inches in 21% of Avery, with a typical depth of 45 inches. Hard bedrock is not mapped within 60 inches, but that does not rule out rock at greater depth. The mapped geology includes Cenozoic terrace deposits, so a route near Mill Creek still needs ground conditions considered.

How much 811 notice does an Avery bore near Austin Street need, and what if marks move?

For an Austin Street excavation, Texas811 needs the locate request at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For work routed through the TxDOT Paris District, if the start slips more than 14 days past the original notice, we submit a new request. On Creek Road 4455, if marks wear off or move, we have them refreshed through Texas811 before continuing work.

How far is Avery from the Yukon office, and does Mount Pleasant change the job?

Avery is 282 road miles and about a 5.5 hour drive from our Yukon, Oklahoma main office. Mount Pleasant is 29.4 miles southwest of Avery, but it does not change the route distance from Yukon. For a bore along US 82, the job location, ground and crossings help determine the mobilization and work plan.

How can a TxDOT Paris District permit affect directional bore costs under US 82 in Avery?

The cost depends on the Avery route, not only the length. For a US 82 bore, we consider the pipe or conduit size, Kullit clay, pavement and right of way details, utility exposures and pit work. Mill Creek or drainage crossings can add planning, and the 282 road miles from Yukon affect mobilization.

Where the Avery facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Avery

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Avery, Texas

Type the address of your job in Avery. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Avery

Same county: Bogata · Detroit · Deport. All counties: Texas county list.