trinityboringsolutions.com

De Kalb Texas Directional Boring: Sawyer Soil, US 82 and Orear Branch

Quick Answer: Need a line beneath US 82, Orear Branch, or a De Kalb street without opening the surface? We do directional boring, also called horizontal directional drilling (HDD), for crossings like US 82 in De Kalb, Texas. Our Yukon main office is 293 road miles away, and FM 992 is one local route to consider for access and staging. Sawyer soil covers 46% of the mapped area, and clay mapped at about 40 inches can grip the reamer and pipe. We adjust the fluid and reaming plan to suit that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

De Kalb bores at a glance

  • Incorporated city in Bowie County, Texas. Population 1,426 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 293 miles, about 5.7 hours of driving.
  • Ground: Sawyer soil is mapped on 46 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: US 82, FM 992, FM 1840 and FM 990. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of De Kalb, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Orear Branch in De Kalb?

We take directional boring work in De Kalb, Bowie County, where the Census Bureau Vintage 2024 estimate puts the population at 1,426. Our crews can place water, sewer, gas, electric conduit and fiber beneath routes such as Front Street or FM 992, keeping the surface crossing intact. We plan each line around its route and the marked utilities along it.

Our main office is in Yukon, Oklahoma, and De Kalb work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965, and we have done directional boring since 1982. More than four decades of boring helps us plan for the sticky clay mapped below Sawyer soil and along De Kalb routes.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does Sawyer soil mean for a bore in De Kalb?

The USDA soil survey maps Sawyer silt loam on 46% of De Kalb and Blevins silt loam on 35%. At about 40 inches below the surface, clay is mapped across 51% of the area, while silt loam accounts for 35%. The mapped average clay content at that depth is 35%. These are mapped soil patterns, not test borings, so a route near Front Street can still vary. Sticky clay may ball on a reamer or grip pipe, which affects fluid choice and the timing of the pull.

USDA soil survey, inside the De Kalb city limitsWhat is mapped
Soil series mappedSawyer 46 percent, Blevins 35 percent, Adaton 8 percent, Rosalie 5 percent and Woodtell 4 percent
Texture at the surfacesilt loam 89 percent, loamy fine sand 5 percent and very fine sandy loam 4 percent
Texture about 40 inches downclay 51 percent, silt loam 35 percent and silty clay loam 8 percent
Engineering class about 40 inches downfat clay (CH) 51 percent and lean clay (CL) 47 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches56 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel59 percent of the area

The soil survey maps bedrock within 40 inches on none of De Kalb, and weathered bedrock within 60 inches on 4%. The mapped geologic units include Quaternary terrace deposits and Late Cretaceous sedimentary material, so a bore near Orear Branch may meet different material than one elsewhere. A seasonal water table within 60 inches is mapped on 56% of the area, while flood prone soils account for 2%. High steel corrosion risk is mapped on 59%, a concern for steel casing and tracer wire; the line owner selects coatings. HDPE is not affected by that soil corrosion concern.

How do crews handle clay on a De Kalb bore?

On De Kalb routes through Sawyer soil, we plan for clay that can stick to the reamer and grip the pipe. We adjust fluid, reaming stages and the pull timing to fit the mapped ground.

  1. With clay mapped at about 40 inches under De Kalb, we use thinner fluid and polymer, then open the hole in stages to limit sticky buildup.
  2. On heavy clay near Sawyer soil, we watch fluid returns and keep pressure controlled so fluid does not lift pavement along streets such as Front Street.
  3. Because a seasonal water table within 60 inches is mapped on 56% of De Kalb, we keep pits small and pump them if water collects.
  4. For a route near Orear Branch, we plan depth beneath the channel and check water crossing jurisdiction; pits stay on the dirt sides rather than in the crossing.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What might a De Kalb bore have to cross near US 82?

US 82 runs 2.2 mapped roadway miles inside De Kalb. FM 992 accounts for 1.6 miles, FM 1840 for 0.6 miles and FM 990 for 0.2 miles within the limits; US 259 is 0.1 miles outside them. The public street network includes 37.77 centerline miles. Front Street is the longest named street at 4.11 miles, followed by Martin Luther King Drive at 1.84 miles and Runnels Street at 1.81 miles. A bore can pass beneath pavement instead of cutting across these routes.

CrossingTypeMapped extentWho has a say
US 82US highway2.2 roadway miles insideState highway office
FM 992State highway1.6 roadway miles insideState highway office
FM 1840State highway0.6 roadway miles insideState highway office
FM 990State highway0.2 roadway miles insideState highway office
US 259Highway nearby0.1 miles outsideState highway office
Orear BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Mud CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Anderson CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside De Kalb or within one mile outside its limits, so the records show no local track crossing to plan around. No named streams are mapped inside the city, and no street crossings of named streams are mapped there. Orear Branch is 0.3 miles from the limits, Mud Creek is 0.5 miles away and Anderson Creek is 0.7 miles away. The city has 0.45 miles of unnamed drainage; no lakes or ponds are mapped within one mile. A planned creek crossing still needs jurisdiction checked during planning.

Whose permission does a De Kalb bore in Bowie County need?

De Kalb is incorporated, so its city streets belong to the city. For work in the right of way of US 82, FM 992, FM 1840 or FM 990, the line owner, not the driller, applies for a TxDOT utility permit through the online RULIS system. The TxDOT Atlanta District reviews it. We give the line owner the bore plan and profile and work under the permit issued to that owner. TxDOT cover rules call for 60 inches at crossings for electric and communication lines, and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. Pressurized sewer crossings need 60 inches. The permit can set another depth. Orear Branch jurisdiction is checked during planning if the route crosses water.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be near a De Kalb bore by City of De Kalb?

The City of De Kalb public water system uses purchased surface water and has 953 service connections serving 1,511 people. Before a bore near a water main, we use hydrovac potholing to expose marked lines and confirm their position. Electric service reporting in Bowie County includes Southwestern Electric Power, Bowie Cass Electric Cooperative and Southwest Arkansas Electric Cooperative. We confirm the electric line owner before planning a conduit bore, including on streets such as Fannin Street.

Line ownerWhat it isSourceSize
City of De KalbPublic water systemSurface water bought from another system953 connections, 1,511 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative and Southwest Arkansas Electric CooperativeElectric utilities reporting service in Bowie CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put De Kalb’s median housing year at 1971. The estimates show 20% of homes built before 1960, 74% from 1960 to 1999 and 6% in 2000 or later. That mix can mean a project is replacing older service or extending a newer one near Runnels Street. Locate marks show position, not depth, so we expose each marked utility before drilling near it.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover De Kalb and nearby Avery?

De Kalb is in Bowie County, at an elevation of 409 feet, and covers 1.37 square miles. Its ZIP code is 75559. Avery is 9.9 miles west, and New Boston, the county seat, is 11.8 miles east. Annona is 17.8 miles west, while Hooks is 19.2 miles east. Wake Village is the nearest larger city listed, 28.8 miles east. From our Yukon, Oklahoma main office, the road distance is 293 miles and the drive is 5.7 hours, so that distance can affect mobilization for work near US 82.

Places near De Kalb

What kinds of bores come up on Front Street in De Kalb?

  • Highway crossing: A bore beneath US 82 keeps the highway surface intact; the line owner arranges the TxDOT right of way permit.
  • Water service: A new service near the City of De Kalb system can pass beneath Front Street without an open cut across the pavement.
  • Fiber conduit: A fiber run along Runnels Street can be planned around marked utilities and the clay mapped beneath De Kalb.
  • Drainage crossing: A route near Orear Branch needs a plan for channel depth and a check for federal waterway jurisdiction.
  • Street crossing: A bore beneath Martin Luther King Drive can connect properties without cutting through the paved street.
  • Farm and acreage service: A longer run toward Avery can carry water or electric conduit while avoiding surface cuts along the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a De Kalb bore near Fannin Street?

For a quote near Fannin Street, give us the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help. The route matters here. A crossing near US 82 or one of the drainage paths can take a different plan than a service run on a clear section of Front Street.

A short, clear run near Front Street with known utility marks is simpler to plan. The price changes with length, pipe or conduit size, soil and rock, utilities to cross and expose, pavement, drainage crossings, pits, excavator time and sand backfill. Clay mapped under Sawyer soil may affect reaming and fluid work. A US 82 right of way or a route near Orear Branch can add crossing and access details, and the 293 road miles from Yukon affect mobilization.

Questions people ask about boring in De Kalb

Does Trinity take directional boring jobs in De Kalb and Bowie County?

Yes. We take directional boring work in De Kalb, and we keep one point of contact from the first call through the bore log. Our own crews handle the work, with support from partner contractor yards that Trinity has vetted. That lets us plan a route under a street such as Front Street without claiming a local office.

Can groundwater near Orear Branch cause problems for De Kalb bore pits?

It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches on 56% of De Kalb, and Orear Branch is 0.3 miles from the city limits. We plan for small pits and pumping if water collects. Flood prone soils are mapped on 2% of the area, so a route near drainage needs attention too.

Does Sawyer soil in De Kalb corrode steel, and what pipe can I use?

The soil survey maps high steel corrosion risk on 59% of De Kalb, including ground mapped as Sawyer soil. That is a consideration for steel casing and tracer wire. HDPE is not affected by soil corrosion. The line owner chooses any coating for steel, so we account for the planned material when laying out a bore near Fannin Street.

What kind of ground does a De Kalb bore pass through in Sawyer soil?

Sawyer silt loam is mapped across 46% of De Kalb, with Blevins silt loam on 35%. At about 40 inches, the soil survey maps clay across 51% of the area and silt loam across 35%. Sticky clay can collect on the reamer, so a bore near Runnels Street may call for staged reaming and a timely pipe pull.

Will a bore in De Kalb hit rock below the mapped soil?

The soil survey maps bedrock within 40 inches on none of De Kalb, but weathered bedrock is mapped within 60 inches on 4% of the area. The geologic map also identifies Quaternary terrace deposits and Late Cretaceous sedimentary material. Those records help frame a bore near US 82, but they do not describe every point on a route.

Who approves a De Kalb bore under US 82, and which TxDOT office reviews it?

For work in the US 82 right of way, the line owner submits the TxDOT utility permit application through RULIS, and the TxDOT Atlanta District reviews it. We provide the bore plan and profile for the owner’s filing. Cover depth depends on the line type and crossing, and the permit can specify a different depth for the US 82 work.

Can I reach Trinity after hours for an urgent bore on Runnels Street in De Kalb?

Yes. Call (405) 409-7423; a person answers 24 hours a day. Tell us the location on Runnels Street, what line needs work and whether the issue is urgent. We also provide 24 hour emergency response, and the route details help us understand the situation before a crew is dispatched.

How early should I call Texas811 for a De Kalb bore near Front Street?

For a bore near Front Street, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If the start slips more than 14 days after the original notice, make a new request. Have worn or moved marks refreshed before work continues.

What affects the cost of a directional bore under US 82 in De Kalb?

The job details set the price, not the highway name alone. Length, pipe size, soil, exposed utilities, pavement, pits, equipment time and drainage crossings all matter. Clay mapped under Sawyer soil can affect the drilling plan, while US 82 right of way details and the 293 road miles from Yukon can shape access and mobilization.

Where the De Kalb facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in De Kalb

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in De Kalb, Texas

Type the address of your job in De Kalb. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for De Kalb

Same county: Texarkana · Nash · Red Lick · Redwater · Leary. All counties: Texas county list.