Anson Texas Directional Boring: Tillman Clay Loam, Carter Creek, US 83
Quick Answer: Tillman clay loam holds a bore hole, but sticky clay can load the reamer. We do directional boring, also called horizontal directional drilling (HDD), for routes under Carter Creek and Anson streets. Anson is 270 road miles from our Yukon, Oklahoma main office, with Avenue North among the streets a bore may cross. USDA maps show heavy clay at about 40 inches, so we manage drilling fluid and ream in stages.
Anson bores at a glance
- County seat of Jones County, Texas. Population 2,544 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 270 miles, about 5.3 hours of driving.
- Ground: Tillman soil is mapped on 74 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 5 percent of the area.
- Highways inside the boundary: US 83, US 277 and US 180. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Carter Creek.
- Public water: City of Anson, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Anson and Jones County?
Tillman clay loam is common around Anson, and it can cling to drilling tools. We take directional boring work in Anson, the Jones County seat. The Census Bureau Vintage 2024 estimate is 2,544; for Anson work, US 83 crossings still call for site specific planning. A route beneath Avenue I or Commercial Avenue can carry water, sewer, gas, electric conduit or fiber, with the line type and path set by the job.
Our main office is in Yukon, Oklahoma, and Anson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965 and has done directional boring since 1982. We have had no utility strike in over 25 years, a record that matters near City of Anson water lines and electric service reported in Jones County.

What ground does a bore encounter in Anson near Tillman soil?
The USDA soil survey maps Tillman soils across 74% of Anson, including Tillman clay loam on 47% of the mapped area and Tillman clay loam with 1 to 3 percent slopes on 27%. About 40 inches down, clay is mapped across 83% of the area, and clay loam across 16%. The average clay content at that depth is 40%. Tillman, Sagerton, Spur, and Rotan map soil patterns around Anson, not test borings for a proposed bore. Sticky clay can build on a reamer, so the drilling plan may call for staged reaming and a same day pullback.
| USDA soil survey, inside the Anson city limits | What is mapped |
|---|---|
| Soil series mapped | Tillman 74 percent, Sagerton 10 percent, Spur 7 percent, Rotan 4 percent and Stamford 4 percent |
| Texture at the surface | clay loam 87 percent, loam 7 percent and clay 5 percent |
| Texture about 40 inches down | clay 83 percent and clay loam 16 percent |
| Engineering class about 40 inches down | fat clay (CH) 78 percent and lean clay (CL) 21 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | 5 percent of the area (0 percent hard rock, 5 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 83 percent of the area |
The soil survey maps bedrock within 60 inches across 5% of Anson, with typical bedrock depth at 32 inches; that mapped pattern calls for checking the route rather than assuming uniform ground. A seasonal water table is not mapped within 60 inches, while flood prone soils cover 7%, a reason to plan carefully near Carter Creek. High steel corrosion risk is mapped on 83% of the area, so the line owner should weigh casing and tracer wire materials; HDPE does not share steel’s corrosion concern. The Seymour Formation is Pleistocene age and includes sand and silty deposits, so site conditions can vary.
How do we bore through Anson clay and Tillman soil?
Tillman clay loam and heavy clay mapped near Anson call for a controlled fluid plan. Along Avenue North or near Carter Creek, we adjust the bore to the route and ground rather than treating every stretch alike.
- Tillman clay loam can cling to the reamer, so we use a thinner fluid mix and work through staged reaming on routes near Avenue I.
- Heavy clay is mapped around 40 inches deep across much of Anson; we watch fluid returns near Commercial Avenue to avoid pressure lifting pavement.
- When a route reaches Carter Creek, we plan the bore depth beneath the channel and check whether the crossing falls under federal jurisdiction.
- Before drilling near marked lines along US 83, we hydrovac expose each utility, then track the drill head and record depth and pitch.

Where might a line go under Avenue North in Anson?
US 83, US 277 and US 180 run inside Anson, while US 80 runs along or touches the city limits. A bore beneath an existing highway is installed by boring or tunneling, not by opening the pavement. Avenue North is the longest named street in the city at 1.96 miles; Avenue I covers 1.58 miles and Commercial Avenue 1.56 miles. Those routes can involve pavement and multiple utility crossings, so the bore path and access points matter.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | US highway | 3.1 roadway miles inside | State highway office |
| US 277 | US highway | 3.1 roadway miles inside | State highway office |
| US 180 | US highway | 1.3 roadway miles inside | State highway office |
| US 80 | Highway nearby | Runs along or touches the city limits | State highway office |
| Carter Creek | Stream | 1.42 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Redmud Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Anson South Lake | Lake or pond | 90 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Anson or within one mile outside the limits, so no local track crossing appears in the public records. Carter Creek runs 1.42 channel miles through the city, and four mapped street crossings of named streams are present. Redmud Creek is 0.6 miles from the city limits, and Anson South Lake lies nearby outside them. Creek and lake routes need depth planning, and a water crossing is checked for federal jurisdiction during planning.
Do I need a permit for a bore under US 83 in Anson?
US 83, US 277 and US 180 are state highway routes for permit purposes, so work in their right of way goes through TxDOT’s Abilene District. The utility owner, not our drilling crew, files the application in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. TxDOT requires boring or tunneling beneath existing highway pavement, and rural highway bores extend under all travel lanes. Cover depends on the line type and location, and the permit can set a different depth. Anson city streets, including Avenue North, belong to the city. A Carter Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Anson near the City of Anson water system?
The City of Anson public water system uses purchased surface water and reports 2,334 service connections serving 3,078 people. A bore near its water lines needs marked utilities exposed before drilling close by. AEP Texas North, Big Country Electric Cooperative and Taylor Electric Cooperative report electric service in Jones County. Those records do not identify the provider at every Anson address, so we confirm the line owner before planning an electric conduit route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Anson | Public water system | Surface water bought from another system | 2,334 connections, 3,078 people served |
| AEP Texas North, Big Country Electric Cooperative and Taylor Electric Cooperative | Electric utilities reporting service in Jones County | EIA Form 861 | Confirm the line owner by address |
We treat the American Community Survey 2019 to 2023 five year estimates of Anson’s median housing year, 1966, as context, not a utility depth guide on Avenue I. It estimates 38% of homes were built before 1960, 56% from 1960 to 1999 and 6% in 2000 or later. A replacement bore along Commercial Avenue may meet older lines, while a newer service can need a different route. We hydrovac pothole marked utilities on the bore path; paint shows position, not depth.

Where is Anson in relation to Abilene?
Anson is the county seat of Jones County, at an elevation of 1,730 feet, and covers 2.76 square miles. Its ZIP code is 79501. Hawley is 11.4 miles southeast, Lueders is 16.2 miles east, and Hamlin is 16.6 miles northwest. Abilene, the nearest larger city, is 22.7 miles southeast. The Yukon yard is 270 road miles away, a 5.3 hour drive; that distance is part of planning crew mobilization for an Anson bore.
Places near Anson
- Directional boring in Hawley: 11.4 miles southeast
- Directional boring in Lueders: 16.2 miles east
- Directional boring in Hamlin: 16.6 miles northwest
- Directional boring in McCaulley: 18.1 miles west
- Directional boring in Impact: 19.6 miles southeast
- Directional boring in Abilene: 22.7 miles southeast
What would we bore near Avenue I in Anson?
- Highway crossing: A route beneath US 83 or US 277 needs a bore planned for the highway right of way and all travel lanes.
- Water service: A connection near the City of Anson system can run beneath a driveway or Avenue I without cutting the surface.
- Fiber route: A conduit run along Commercial Avenue can pass below pavement, with marked utilities exposed along the planned path.
- Creek crossing: A bore beneath Carter Creek needs a depth plan for the channel and a check for federal jurisdiction.
- Street crossing: A route beneath Avenue North can keep pavement intact while connecting service on opposite sides.
- Electric conduit: Near an Anson address, we confirm the line owner before planning conduit and expose marked utilities along the bore path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near Avenue J in Anson?
For a route near Avenue J, start with the job location, such as an address or map pin. Tell us what will go underground, such as a water line near the City of Anson system, then give the pipe or conduit size and footage. A sketch or plans help show crossings, pits and the route.
Price follows the route and the work it takes. Tillman clay and the area’s mapped heavy clay matter because sticky ground can take staged reaming and fluid control. A crossing beneath US 83 adds highway requirements, while Carter Creek brings a water crossing into the plan. We also consider line size, footage, utilities to expose, pavement, pit and excavator needs, and mobilization from Yukon, 270 road miles away. Emergency or high profile work can change the scope.
Questions people ask about boring in Anson
Does Trinity take directional boring jobs in Anson and Jones County, and how are crews assigned?
Yes. We take work in Anson and across Texas. Our own crews and partner drilling contractors Trinity has vetted handle the field work, with Trinity coordinating the job from the first call through the bore log. That gives a customer one point of contact for a route near Avenue North, whichever crew is on site.
Who owns electric lines in Jones County near Anson, and who confirms conduit specs?
AEP Texas North, Big Country Electric Cooperative and Taylor Electric Cooperative report electric service in Jones County. The provider at a particular Anson address must be confirmed with the line owner before we plan a conduit bore. That check helps set the route and conduit requirements near a street such as Commercial Avenue.
Who is responsible for Commercial Avenue in Anson, and can a bore avoid cutting it?
Commercial Avenue is a city street, so it belongs to the City of Anson. Directional boring can pass beneath pavement without opening a trench through the street. The route still needs planning for marked utilities, entry and exit pits, and any required approvals for the particular work.
Does Anson housing near Avenue I suggest older lines may need replacement bores?
It can. The American Community Survey 2019 to 2023 five year estimates give Anson a median housing year of 1966, with 38% of homes built before 1960. Older properties can have lines that need replacement, while newer services may need a fresh connection. Potholing near Avenue I helps locate marked utilities before drilling.
Can Tillman soil in Anson corrode steel, and what pipe should a project use?
The USDA soil survey maps high steel corrosion risk on 83% of Anson, much of it in Tillman soils. The line owner should consider that risk when selecting steel casing or tracer wire materials. HDPE is not affected by this soil corrosion concern, but the pipe choice depends on the line and project.
What ground does a bore pass through in Anson’s Tillman soil?
Tillman is the leading mapped soil series in Anson, and clay is mapped across 83% of the area at about 40 inches below the surface. The USDA soil survey shows an average clay content of 40% at that depth. Sticky clay can collect on the reamer, so staged reaming and fluid control may be needed.
Can I reach Trinity after hours for an urgent bore near Commercial Avenue in Anson?
Yes. For Anson projects, we answer Trinity’s phone 24 hours a day at (405) 409-7423 and coordinate permits through TxDOT Abilene District. For an urgent job near Commercial Avenue, share the location and what needs to go underground so we can understand the route and scope. Trinity also provides 24 hour emergency response.
How far ahead should I call Texas811 for an Anson bore near Avenue North?
Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If a bore near Avenue North slips more than 14 days past the original notice, make a new request. We ask for worn or moved marks to be refreshed through Texas811 before work continues near Carter Creek in Anson.
What affects the cost of a directional bore in Anson near US 83?
The route, footage and pipe or conduit size shape the scope, along with Tillman clay, utilities to expose, pavement and pit work. A US 83 crossing adds highway planning, while a Carter Creek route can require water crossing review. Mobilization also matters because Anson is 270 road miles from the Yukon yard.
Where the Anson facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Anson
- U.S. Census Bureau, TIGER/Line 2024: Anson boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Anson
- U.S. Census Bureau, American Community Survey 2019 to 2023: Anson housing units and year built
- Macrostrat geologic map compilation: map units under Anson
- U.S. EPA Safe Drinking Water Information System: public water systems serving Anson
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jones County
- U.S. Geological Survey, Elevation Point Query Service: Anson elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Anson
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Anson
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Anson, Texas
Type the address of your job in Anson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Anson
Same county: Stamford. All counties: Texas county list.
