Stamford Texas Directional Boring: Rowena Clay, US 277 and Flat Paint Creek
Quick Answer: Need a line under US 277 without cutting the pavement? Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for Stamford crossings. Stamford is 257 road miles from our Yukon, Oklahoma main office, so a route near Flat Paint Creek affects mobilization as well as the bore plan. The USDA maps Rowena clay loam here, and heavy clay can cling to a reamer and grip the pipe. We adjust fluid and ream in stages to keep a bore workable under Stamford streets.
Stamford bores at a glance
- Incorporated city in Haskell County and Jones County, Texas. Population 2,952 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 257 miles, about 5.3 hours of driving.
- Ground: Rowena soil is mapped on 15 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 21 percent of the area.
- Highways inside the boundary: US 277, US 277 Business, Texas State Highway 6, FM 142 and FM 1226. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Flat Paint Creek, Stink Creek and Spring Creek.
- Public water: City of Stamford, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone bore beneath Flat Paint Creek in Stamford?
Trinity Boring Solutions takes water, sewer, gas, electric conduit and fiber work in Stamford, where those lines can run beneath US 277, Texas State Highway 6 or local streets. The Census Bureau Vintage 2024 estimate puts Stamford at 2,952 people across Haskell and Jones counties. We plan each bore around its route and the existing lines near it.
Our main office is in Yukon, Oklahoma, and Stamford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have done directional boring since 1982, after the family business began in 1965. Four decades of boring matter on Stamford routes because Rowena clay and shallow weathered bedrock call for controlled reaming and careful steering.

How does Rowena soil affect directional boring in Stamford?
The USDA soil survey maps Rowena as 15% of Stamford’s soil series, and the Rowena clay loam map unit covers 15% of the city. At about 40 inches below the surface, clay is mapped across 46% of the area; the survey’s average clay content at that depth is 45%. Surface texture maps 29% clay loam and 20% clay. Our mapped Rowena, Vernon, Tillman, and Knoco patterns guide planning, but they are not test borings for Stamford. Sticky clay can ball on the reamer and swell against pipe, so the ground affects how we size the ream and manage fluid.
| USDA soil survey, inside the Stamford city limits | What is mapped |
|---|---|
| Soil series mapped | Rowena 15 percent, Vernon 10 percent, Tillman 7 percent, Knoco 7 percent and Stamford 3 percent |
| Texture at the surface | clay loam 29 percent and clay 20 percent |
| Texture about 40 inches down | clay 46 percent |
| Engineering class about 40 inches down | fat clay (CH) 38 percent and lean clay (CL) 11 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | 21 percent of the area (2 percent hard rock, 20 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 49 percent of the area |
The USDA survey places bedrock within 60 inches across 21% of Stamford, with 20% mapped as weathered and 2% as hard. Red Silty Clay Disintegration Residuum of Quaternary age and the Permian Clear Fork Group help explain why a bore may move from clay into shale or other rock. A hard soil bit may handle weathered material, while hard rock can need a rock bit and slower steering. Seasonal water tables are not mapped within 60 inches, but flood prone soils cover 3%; Flat Paint Creek needs a channel aware plan. High steel corrosion risk covers 49%, so line owners should consider casing and tracer wire materials.
How do we bore Stamford clay without opening pavement?
Rowena clay and the mapped Clear Fork Group mean a Stamford bore can shift from sticky soil to rock. We match the fluid, reamer and steering checks to the route.
- Rowena clay can stick to the reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe the same day.
- Near US 277 pavement, we watch fluid returns and keep pressure low enough to reduce the chance of lifting a slab.
- Where the Clear Fork Group changes into weathered rock, we slow the advance and check depth and pitch as the Stamford drill head moves.
- Before approaching marked lines near the City of Stamford water system, we hydrovac expose them; paint shows position, not depth, along each route.

What crossings should a Stamford bore plan for on US 277?
US 277 has 6.0 mapped roadway miles inside Stamford, alongside Texas State Highway 6 and FM 142, FM 1226, FM 2976 and FM 600. Texas State Highway 283 touches the limits, while Texas State Highway 92 is 1.3 miles away. For crossings beneath Texas State Highway 6 pavement, we follow TxDOT rules calling for boring or tunneling below existing pavement. Swenson Street is the longest named street at 2.03 miles, followed by Reynolds Street at 1.73 miles and McKinley Street at 1.58 miles. For those routes, we locate and expose marked lines before drilling near them.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 277 | US highway | 6 roadway miles inside | State highway office |
| US 277 Business | US highway | 0.8 roadway miles inside | State highway office |
| Texas State Highway 6 | State highway | 4.3 roadway miles inside | State highway office |
| FM 142 | State highway | 1.7 roadway miles inside | State highway office |
| FM 1226 | State highway | 1.4 roadway miles inside | State highway office |
| FM 2976 | State highway | 0.9 roadway miles inside | State highway office |
| FM 600 | State highway | 0.2 roadway miles inside | State highway office |
| Texas State Highway 283 | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 92 | Highway nearby | 1.3 miles outside | State highway office |
| Flat Paint Creek | Stream | 1.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Stink Creek | Stream | 0.23 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Spring Creek | Stream | 0.2 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Horse Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Buffalo Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Stamford or within 1 mile, and no street and rail crossing is mapped, so no track route appears in the local crossing picture. Flat Paint Creek runs 1.14 channel miles inside the city; Stink Creek and Spring Creek also appear on the map. Two mapped street crossings intersect named streams. Lake Stamford and College Lake are inside the limits, so a creek or lake route needs depth planning and a jurisdiction check.
Whose approval does a Stamford bore in Haskell County need?
Stamford is an incorporated city, so its city streets belong to the city itself. A bore in the right of way of US 277, Texas State Highway 6 or a farm to market road needs a TxDOT utility permit; the TxDOT Abilene District reviews the application. The utility that owns the line files online through RULIS, while we prepare the bore plan and profile and work under the owner’s permit. Flat Paint Creek or another creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped in Stamford.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are near the City of Stamford system in Stamford?
The City of Stamford public water system uses surface water and reports 2,582 service connections serving 3,101 people. AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County. Those providers do not identify the electric owner for every address, so we establish the line owner before planning a conduit bore. Near a City of Stamford water line, hydrovac potholing helps locate the actual buried line before the drill approaches.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Stamford | Public water system | Surface water | 2,582 connections, 3,101 people served |
| AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative | Electric utilities reporting service in Haskell County and Jones County | EIA Form 861 | Confirm the line owner by address |
We treat Stamford’s 1958 median housing year in the American Community Survey 2019 to 2023 five year estimates as context, not a measure of underground conditions. The survey estimates 56% of housing units were built before 1960, 36% from 1960 to 1999 and 8% in 2000 or later. That mix can mean a job along Ferguson Street replaces older pipe or adds a new service. We hydrovac expose marked utilities on the bore path, including water and electric lines, because surface marks do not show depth.

What is near Stamford and Haskell?
Stamford covers 5.96 square miles on the border of Haskell and Jones counties, with 74% of the city in Haskell County. Its elevation is 1,449 feet, and its ZIP codes are 79553 and 79521. Haskell, the county seat, is 11.1 miles northwest; Lueders is 17.0 miles south, Rule is 19.5 miles northwest, Weinert is 19.7 miles north and Rochester is 23.8 miles northwest. Abilene is 41.7 miles south. From our Yukon yard, Stamford is 257 road miles and a 5.3 hour drive, which affects mobilization for work near US 277.
Places near Stamford
- Directional boring in Haskell: 11.1 miles northwest
- Directional boring in Lueders: 17 miles south
- Directional boring in Rule: 19.5 miles northwest
- Directional boring in Weinert: 19.7 miles north
- Directional boring in Rochester: 23.8 miles northwest
- Directional boring in Abilene: 41.7 miles south
What kinds of bores fit McKinley Street in Stamford?
- Highway crossing: A bore beneath US 277 can keep the pavement intact, with the alignment and TxDOT review planned before work.
- Water service: A connection near the City of Stamford system starts with identifying buried water lines and exposing marked crossings.
- Fiber conduit: A route along Swenson Street can avoid cutting pavement and sidewalks, with pits set in dirt at each end.
- Creek crossing: Flat Paint Creek calls for a route beneath the channel and a jurisdiction check during planning.
- Residential service: Work near McKinley Street or Ferguson Street can use a 3/4 inch service line in a bore between entry and exit pits.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Stamford bore near Swenson Street?
A map pin near Swenson Street or Flat Paint Creek matters because the exact spot can change the route, pavement, creek and buried utility crossings. For a Stamford quote, send the job address or pin, what goes underground, pipe or conduit size and footage. A sketch or plans help us place the pits and trace the alignment.
The 257 road miles from Yukon enter the mobilization plan for a Stamford job. Rowena clay can call for staged reaming, while a Clear Fork rock contact can slow drilling; each US 277, Flat Paint Creek or pavement crossing adds planning and exposure work. Pipe size and bore length matter too, along with the number of utilities to pothole, concrete, pit access, excavator time, sand backfill and whether the schedule is high profile or emergency.
Questions people ask about boring in Stamford
Does Trinity take directional boring jobs in Stamford and Haskell County?
Yes. Trinity takes directional boring work in Stamford and across Texas, including routes in Haskell County. The job stays with Trinity from the first call through the bore log, whether our own crew or a crew from a vetted partner contractor is on site. We coordinate the work through our Yukon main office.
Does Rowena soil in Stamford create a corrosion issue for steel pipe?
The USDA survey maps high steel corrosion risk across 49% of Stamford, which matters for steel casing and tracer wire near Rowena soils. HDPE does not corrode from this mapped soil condition. The line owner decides which materials and protection to specify for steel components on a particular route.
What ground does a bore pass through in Stamford’s Rowena soil?
The USDA soil survey maps Rowena across 15% of Stamford’s soil series, and clay covers 46% of the mapped area at about 40 inches below ground. That is a soil map, not a test boring. Sticky clay may cling to the reamer, so staged reaming and fluid control matter along routes such as McKinley Street.
Could a Stamford bore run into rock near the surface?
Rock can occur within a bore’s shallow path: the survey maps bedrock within 60 inches across 21% of Stamford. Weathered bedrock is mapped across 20% and hard bedrock across 2%. The Quaternary Red Silty Clay Disintegration Residuum can grade into shale, while the Permian Clear Fork Group includes several rock types.
Who approves a bore beneath US 277 in Stamford?
TxDOT reviews a utility permit for work in the US 277 right of way through its Abilene District. The utility that owns the line submits the application in RULIS; we prepare the bore plan and profile and work under that owner’s permit. The route and required cover are addressed in the permit.
Can you bore beneath Flat Paint Creek in Stamford?
A bore beneath Flat Paint Creek can be planned without cutting open the channel. The creek runs 1.14 channel miles inside Stamford, so the route needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction. We also expose marked utilities along the bore path before the drill approaches them.
What bore sizes and lengths can you handle near Ferguson Street in Stamford?
Along Swenson Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. That range can fit different scopes near Ferguson Street, but the route, soil and crossings determine the equipment and plan for a particular job.
How much 811 notice do I need for a Stamford bore near Swenson Street?
For a Swenson Street bore, request Texas811 locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For work near Flat Paint Creek, if the start slips more than 14 days past the original notice, we submit a new request. Before work continues near FM 142, we refresh worn or moved marks through Texas811.
What affects the cost of directional boring under US 277 in Stamford?
The scope sets the price for a US 277 bore: length, pipe size, Rowena clay or rock, utility crossings, pavement and creek work all affect the plan. Pit access, excavator time, backfill and schedule can add work, while the 257 road miles from Yukon affect mobilization.
Where the Stamford facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Stamford
- U.S. Census Bureau, TIGER/Line 2024: Stamford boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Stamford
- U.S. Census Bureau, American Community Survey 2019 to 2023: Stamford housing units and year built
- Macrostrat geologic map compilation: map units under Stamford
- U.S. EPA Safe Drinking Water Information System: public water systems serving Stamford
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Haskell County and Jones County
- U.S. Geological Survey, Elevation Point Query Service: Stamford elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Stamford
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Stamford
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Stamford, Texas
Type the address of your job in Stamford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Stamford
County: Jones County directional boring. Same county: Anson · Hamlin · Hawley. All counties: Texas county list.
