Aurora Texas Directional Boring: Bastsil Soil, FM 718 And Blue Creek
Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Aurora, Texas, for routes beneath roads such as FM 718. Aurora has 208 road miles from our Yukon yard, and its 26.36 public road miles include Aurora Vista Trail. The USDA soil survey maps sandy clay loam at 40 inches across 66 percent of the area, so clay can cling to the reamer. We adjust the drilling fluid and ream in stages to suit that ground.
Aurora bores at a glance
- Incorporated city in Wise County, Texas. Population 1,618 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 208 miles, about 4.1 hours of driving.
- Ground: Bastsil soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 18 percent of the area.
- Highways inside the boundary: FM 718 and Texas State Highway 114. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Blue Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Aurora near FM 718?
Trinity Boring Solutions takes directional boring work in Aurora, Wise County, including along FM 718 and Texas State Highway 114. The Census Bureau Vintage 2024 estimate puts Aurora’s population at 1,618. For routes near Aurora Vista Trail or other city streets, we install water, sewer, gas, electric conduit and fiber by boring rather than cutting across the route.
Our main office is in Yukon, Oklahoma, and Aurora work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet for 48 inch pipe under the Arkansas River in Tulsa; a typical Aurora job is shorter, such as a service line routed beneath FM 718. Our family business began in 1965, and we have done directional boring since 1982; that experience informs planning in Aurora.

How does Aurora’s Bastsil soil affect a bore?
Aurora’s mapped Bastsil fine sandy loam covers 23 percent of the city, and Bastsil is the leading mapped soil series at 30 percent. The USDA soil survey maps sandy clay loam at about 40 inches below the surface across 66 percent of Aurora, with an average clay content of 28 percent at that depth. Fine sandy loam is the most common surface texture, mapped across 42 percent. For Aurora’s sandy clay loam, these are mapped soil patterns, not test borings, so they do not confirm conditions at a bore location. Clay can stick to a reamer, while the smaller sandy share may need care to keep the hole open.
| USDA soil survey, inside the Aurora city limits | What is mapped |
|---|---|
| Soil series mapped | Bastsil 30 percent, Duffau 19 percent, Venus 15 percent, Somervell 8 percent and Frio 5 percent |
| Texture at the surface | fine sandy loam 42 percent, loam 15 percent and loamy fine sand 12 percent |
| Texture about 40 inches down | sandy clay loam 66 percent, bedrock 15 percent and clay 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 67 percent, fat clay (CH) 14 percent and clayey sand (SC) 4 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 18 percent of the area (11 percent hard rock, 7 percent weathered rock) |
| Seasonal water table within 60 inches | 8 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 20 percent of the area |
Bedrock is mapped within 40 inches in 17 percent of Aurora and within 60 inches in 18 percent; the typical mapped depth is 31 inches. Seasonal water tables are mapped within 60 inches in 8 percent, and flood prone soils cover 6 percent, so pit placement and depth need attention near Blue Creek. High steel corrosion risk is mapped across 20 percent, a consideration for steel casing and tracer wire that the line owner should address. The geologic map names Paluxy Sand of Aptian age, described as sand, clay and related material, so actual conditions can vary along a bore.
How do we plan a bore through Aurora’s sandy clay loam?
For Aurora’s sandy clay loam, we manage fluid and reaming to limit clay buildup and keep the hole stable. Near Blue Creek or a roadway, we also plan the bore path and pits around the site.
- Clay control: Aurora’s sandy clay loam can build up on a reamer, so we use a thinner fluid with polymer and open the hole in stages.
- Line exposure: Before approaching a marked utility near FM 718, we use hydrovac potholing to check its depth because surface paint only shows its position.
- Steering checks: We track the drill head from the surface and log depth and pitch as the bore advances, including near Blue Creek’s mapped channel.
- Pit and pull planning: With seasonal water tables mapped in parts of Aurora, we plan manageable pits and have the pipe ready before the final ream.

Where might an Aurora line pass under Union Pacific?
Aurora bores may pass beneath FM 718 or Texas State Highway 114, both inside the city, while US 287 and US 81 lie 0.5 miles from the limits. A highway route needs a planned crossing depth and a bore that extends beneath the travel lanes. Aurora has 26.36 public road centerline miles; its longest named streets include Aurora Vista Trail at 1.8 miles, Old Base Road at 1.6 miles and Derting Road at 1.34 miles. A bore can keep those paved routes uncut.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 718 | State highway | 2.8 roadway miles inside | State highway office |
| Texas State Highway 114 | State highway | 1.4 roadway miles inside | State highway office |
| US 287 | Highway nearby | 0.5 miles outside | State highway office |
| US 81 | Highway nearby | 0.5 miles outside | State highway office |
| Texas State Highway 114 Business | Highway nearby | 0.7 miles outside | State highway office |
| US 81 Business | Highway nearby | 0.9 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0 miles outside | The railroad |
| BNSF Railway | Railroad nearby | 1 miles outside | The railroad |
| Blue Creek | Stream | 2.25 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Oates Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| West Fork Trinity River | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Aurora, but Union Pacific runs along or touches the city boundary and BNSF Railway is 1.0 mile away. No street and rail crossings are mapped inside the limits, so a proposed route still needs checking against the actual track location. Blue Creek has 2.25 channel miles in Aurora, with two mapped street crossings of named streams. Around Aurora, no lakes or ponds are mapped within one mile, a map detail we account for when planning underground routes. A creek route needs depth planning and a check for federal waterway jurisdiction.
Whose permission does an Aurora bore in Wise County need?
Aurora’s city streets belong to the city, while work in the right of way of FM 718 or Texas State Highway 114 needs a TxDOT utility permit. The TxDOT Fort Worth District reviews that application, which the utility owner submits through RULIS; we prepare the bore plan and profile for the owner’s filing and work under its permit. Electric and communication lines crossing a state highway need 60 inches of cover below the lowest point of the crossed grade, and water lines need 60 inches. A Union Pacific crossing needs an agreement with the railroad, and a Blue Creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Wise County Aurora?
Public records do not let us match a water provider to a particular Aurora address, so the provider for a specific location must be confirmed with the city, county or local water district before planning a bore. Utilities reporting electric service in Wise County include Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. We confirm the electric line owner before planning conduit. Along FM 718, hydrovac potholing lets us expose marked water and electric lines before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Wise County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Aurora’s median housing year at 1994; 8 percent of housing was built before 1960, 55 percent from 1960 to 1999 and 37 percent in 2000 or later. That mix can mean work on older lines as well as new services near Brammer Drive. Before the drill approaches a marked utility, we pothole it to verify its depth; paint alone does not show how deep a line sits.

What is near Aurora and Newark?
Aurora is in Wise County, at an elevation of 749 feet, and covers 3.72 square miles. The city’s ZIP code is 76078. Rhome is 1.8 miles northeast, Newark is 3.2 miles southeast, and Boyd is 3.7 miles northwest; Briar, the nearest larger city listed, is 4.6 miles southwest. Decatur, the county seat, is 12.6 miles north. Aurora is 208 road miles and a 4.1 hour drive from our Yukon yard, a distance that can affect mobilization for a job near FM 718.
Places near Aurora
- Directional boring in Rhome: 1.8 miles northeast
- Directional boring in Newark: 3.2 miles southeast
- Directional boring in Boyd: 3.7 miles northwest
- Directional boring in Briar: 4.6 miles southwest
- Directional boring in New Fairview: 5.7 miles northeast
What would we bore near Aurora Vista Trail?
- Highway crossing: A bore beneath FM 718 can carry water, sewer, gas, electric conduit or fiber without cutting across the roadway.
- Street service: A service route along Derting Road can use entry and exit pits in the dirt while keeping the paved street intact.
- Creek crossing: A Blue Creek bore needs a planned path below the channel and a review of whether federal jurisdiction applies.
- Rail crossing: A proposed route near the Union Pacific boundary needs coordination with the railroad before a track crossing is planned.
- Fiber route: A conduit run near Aurora Vista Trail can be sized and routed around marked utilities exposed by potholing.
- Water service: A connection near Brammer Drive needs the address specific water provider confirmed before the bore is planned.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Aurora work near Blue Creek?
For a bore near Blue Creek, tell us the address or map pin, what line is going in, its pipe or conduit size and the footage. For example, a request along FM 718 should identify the route and what it carries; a sketch or plans can clarify the path. We can handle bores from 10 feet to 5,000 feet, with sizes from 3/4 inch service lines to 48 inch casing.
Aurora’s 208 road miles from Yukon affect mobilization, while the mapped sandy clay loam and possible shallow bedrock affect drilling time and equipment. A route under FM 718, near a Union Pacific track or across Blue Creek adds crossing planning. Length, pipe or conduit size, exposed utilities, pavement, pits, excavator time and sand backfill also shape the scope. High profile or emergency work can call for additional planning.
Questions people ask about boring in Aurora
Does Trinity take directional boring jobs in Aurora, Wise County, and how are crews assigned?
Yes. We take directional boring work in Aurora and serve Texas from our Yukon main office, using our own crews and vetted partner contractor yards to staff the work. You deal with Trinity from the first call through the bore log, whether the crew is working near FM 718 or elsewhere in Wise County.
Who approves a bore under FM 718 in Aurora?
For work in the FM 718 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Fort Worth District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under the permit issued to that owner. The required cover depends on the line type and permit conditions.
What does an Aurora bore under the Union Pacific track require?
A crossing of the Union Pacific track at Aurora’s boundary needs an agreement from Union Pacific. The railroad sets crossing conditions such as casing, depth and flagging. If the route also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.
Can a line be bored under Blue Creek in Aurora?
A bore under Blue Creek can be planned, with its depth set to pass beneath the channel. The stream has 2.25 channel miles in Aurora, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. The exact route and site conditions determine the bore plan.
Who owns electric lines in Wise County near Aurora, and who confirms conduit specs?
Several utilities report electric service in Wise County, including Oncor Electric Delivery Company and Wise Electric Cooperative. That does not identify the owner at every Aurora address, so we confirm the specific line owner before planning an electric conduit bore and check the conduit requirements with that owner.
Who controls Derting Road in Aurora, and does a bore require cutting it?
Derting Road is a city street, so it belongs to the City of Aurora. Directional boring can route a line beneath the street with pits set in the dirt on either side, avoiding a cut across the roadway. The route and marked utilities still need to be checked before drilling.
What bore sizes and lengths can Trinity handle near Brammer Drive in Aurora?
For work near Brammer Drive, we handle sizes from 3/4 inch service lines up to 48 inch casing and bore lengths from 10 feet to 5,000 feet. The right setup depends on the line, route, ground and crossings, including any pavement or utilities along the proposed path.
How much notice does Texas811 need for a bore by Aurora Vista Trail?
For work near Aurora Vista Trail, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For Aurora work, if the start slips more than 14 days past the original notice, we submit a new request. Before work continues in Aurora, we have worn or moved marks refreshed through Texas811.
What affects the cost of a directional bore under FM 718 in Aurora?
The FM 718 crossing scope affects the price, along with bore length, pipe or conduit size, Aurora’s soil and possible bedrock, and the number of utilities to expose. Pavement, pits, creek or drainage crossings, excavator time, backfill and mobilization from Yukon also matter. We assess the actual route and work requirements rather than using one factor alone.
Where the Aurora facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Aurora
- U.S. Census Bureau, TIGER/Line 2024: Aurora boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Aurora
- U.S. Census Bureau, American Community Survey 2019 to 2023: Aurora housing units and year built
- Macrostrat geologic map compilation: map units under Aurora
- U.S. Department of Transportation, North American Rail Network: track owners in Wise County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Wise County
- U.S. Geological Survey, Elevation Point Query Service: Aurora elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Aurora
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Aurora
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Aurora, Texas
Type the address of your job in Aurora. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Aurora
Same county: Decatur · Bridgeport · Pecan Acres · Runaway Bay · Alvord · Chico · Paradise · Lake Bridgeport. All counties: Texas county list.
