trinityboringsolutions.com

Runaway Bay Texas Directional Boring: Bonti Soil, US 380 And Willow Creek

Quick Answer: Can we get your line beneath US 380 or Runaway Bay Drive without cutting the pavement? Yes, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Runaway Bay, Texas, for those routes. Yukon is 206 road miles away, and a route near Half Moon Way needs mobilization planned around that trip. At the bore, Bonti soil and mapped clay matter: clay can cling to the reamer, so we control fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Runaway Bay bores at a glance

  • Incorporated city in Wise County, Texas. Population 2,123 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 206 miles, about 4.2 hours of driving.
  • Ground: Bonti soil is mapped on 10 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 32 percent of the area.
  • Highways inside the boundary: US 380 and Texas State Highway 114. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Runaway Bay, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Runaway Bay and Wise County?

Trinity Boring Solutions takes directional boring work in Runaway Bay, Wise County, where the Census Bureau Vintage 2024 estimate puts the population at 2,123. Can you get a line under US 380 or Runaway Bay Drive without cutting pavement? We install water, sewer, gas, electric conduit and fiber along those routes, with the bore path planned for the line and access.

Our main office is in Yukon, Oklahoma, and Runaway Bay work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. Near Runaway Bay Drive, our work ranges from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Runaway Bay and Bonti soil?

The USDA soil survey maps Bonti soil in Runaway Bay, including Bonti-Exray complex on 8 percent of the mapped area. Fine sandy loam is mapped at the surface across 11 percent, while at about 40 inches the survey maps bedrock under 20 percent, clay under 13 percent and silty clay under 3 percent. Average clay content at that depth is 43 percent, and heavy clay is mapped under 17 percent. Bonti, Truce, Darnell and Thurber map soil patterns near Runaway Bay, but we still check field conditions rather than treating maps as test borings. Clay can hold the hole open but may stick to the reamer and grip the pipe.

USDA soil survey, inside the Runaway Bay city limitsWhat is mapped
Soil series mappedBonti 10 percent, Truce 9 percent, Darnell 5 percent, Thurber 4 percent and Hensley 4 percent
Texture at the surfacefine sandy loam 11 percent, very fine sandy loam 9 percent and extremely stony fine sandy loam 5 percent
Texture about 40 inches downbedrock 20 percent, clay 13 percent and silty clay 3 percent
Engineering class about 40 inches downlean clay (CL) 9 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches32 percent of the area (4 percent hard rock, 28 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel30 percent of the area

Bedrock is mapped within 60 inches across 32 percent of Runaway Bay, including 4 percent hard bedrock and 28 percent weathered bedrock; the typical mapped depth is 31 inches. That calls for checking the route and adjusting the bit if the bore reaches rock. The USDA survey maps no seasonal water table within 60 inches and 1 percent flood prone soils. High steel corrosion risk covers 30 percent, a concern for uncoated steel casing and tracer wire. The Jasper Creek Formation, mapped in the area and dated Kasimovian, is described as mudstone and sandstone, so ground conditions can vary along a bore.

How do we bore Runaway Bay ground with mapped bedrock?

For a Runaway Bay bore through clay or weathered rock, we match the tooling and drilling fluid to the route. Bonti soil and the mapped Jasper Creek Formation make the soil survey a starting point, not a substitute for checking the actual bore path.

  1. Where Bonti soil has clay, we use controlled fluid and staged reaming to manage sticky cuttings, then pull the pipe soon after the hole is opened.
  2. Because bedrock is mapped within 60 inches across 32 percent of Runaway Bay, we check the drill head’s depth and pitch as the bore advances.
  3. At a route near Willow Creek, we plan the bore depth around the channel and check whether the crossing falls within U.S. Army Corps of Engineers jurisdiction.
  4. Before drilling near a marked line along Runaway Bay Drive, we expose it with hydrovac potholing; a surface mark shows position, not depth.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Could a bore near Runaway Bay Drive meet creeks in Runaway Bay?

US 380 and Texas State Highway 114 each have 3.1 mapped roadway miles within Runaway Bay, so a highway route needs its own crossing plan. Runaway Bay Drive is the longest named street at 2.44 miles, followed by Port O Call Drive at 2.18 miles and Half Moon Way at 1.76 miles. These street corridors can shape access and bore length. The specific line route determines whether a crossing is needed and where the pits can sit without cutting pavement.

CrossingTypeMapped extentWho has a say
US 380US highway3.1 roadway miles insideState highway office
Texas State Highway 114State highway3.1 roadway miles insideState highway office
Willow CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Boons CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Jasper CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Coal Bed BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Lake BridgeportLake or pond12 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Runaway Bay or within 1 mile outside its limits, and no street and rail crossings are mapped in the city. Willow Creek, Boons Creek, Jasper Creek and Coal Bed Branch run along or touch the boundary, while 5.62 miles of unnamed drainage are mapped within the city. No street crossings of named streams are mapped inside the limits. Lake Bridgeport is nearby, with a 12 acre lake or pond mapped within 1 mile outside the city, so any proposed water crossing needs site specific planning.

Who has to sign off on a Runaway Bay bore under US 380?

For a bore under US 380 or Texas State Highway 114 in Runaway Bay, the line owner, not the drilling contractor, submits the utility permit application through TxDOT’s online RULIS system. The TxDOT Fort Worth District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover requirements include 60 inches for electric and communication lines at crossings and 48 inches when running along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way; pressurized sewer crossings need 60 inches. The district can set different depths in the permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Runaway Bay near the City of Runaway Bay water system?

The City of Runaway Bay public water system uses surface water and reports 1,296 service connections serving 2,458 people. For a water bore near Runaway Bay Drive, the connection and route should be confirmed before planning. Electric service reported in Wise County includes Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri County Electric Cooperative and Wise Electric Cooperative. The line owner for the specific address is confirmed before we plan an electric conduit bore.

Line ownerWhat it isSourceSize
City of Runaway BayPublic water systemSurface water1,296 connections, 2,458 people served
Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Wise CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Runaway Bay’s median housing year at 1986; 1 percent of units were built before 1960, 71 percent from 1960 to 1999 and 28 percent in 2000 or later. That mix can mean work for a replacement line as well as a newer service near Half Moon Way. Along Runaway Bay Drive, we hydrovac pothole each marked utility on the bore path before drilling near it. For example, a proposed line under Jim Walters Drive needs marked utilities exposed so their depth is known, not inferred from paint.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Runaway Bay in relation to Bridgeport and Yukon?

Runaway Bay is in Wise County, 17.0 miles west of county seat Decatur, at an elevation of 856 feet and covering 2.52 square miles. For work near US 380, we confirm ZIP code 76426 serves Runaway Bay before coordinating site details. Lake Bridgeport is 3.4 miles northeast, and Bridgeport, the nearest larger city, is 6.4 miles east. Chico is 9.4 miles northeast, Paradise is 10.9 miles east and Perrin is 14.9 miles southwest. Our Yukon, Oklahoma yard is 206 road miles away, a 4.2 hour drive, which affects how we plan mobilization for work near US 380.

Places near Runaway Bay

What would we bore near Runaway Bay and Half Moon Way?

  • Highway crossing: A line beneath US 380 can be bored below the existing pavement, with the owner handling the TxDOT permit.
  • Street service: A water or sewer connection near Runaway Bay Drive can run beneath pavement, with pits placed in dirt on each side.
  • Fiber conduit: A route along Half Moon Way can carry conduit without opening the street surface.
  • Creek crossing: A proposed bore at Willow Creek needs a planned depth under the channel and a jurisdiction check.
  • Water system work: A line near the City of Runaway Bay system needs its owner and route confirmed before we plan the bore.
  • Drainage crossing: A bore near Jasper Creek Road can be planned around the mapped drainage and local ground conditions.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Runaway Bay bore near Willow Creek?

A map pin matters near Willow Creek because the exact route shows whether the bore approaches a boundary channel or unnamed drainage. For a quote, send the Runaway Bay address or pin, what will go underground, and the pipe or conduit size and footage. A sketch or plans help us check access, crossings and the likely pit locations.

Price is based on the route and work, with Bonti soil and possible weathered bedrock affecting tooling and reaming. Bore length and pipe size matter, as do utilities to expose, pavement near US 380, drainage or Willow Creek crossings, and pits or excavator time. The 206 road miles from Yukon also factor into mobilization. High profile or emergency work can add planning needs, so the map pin and scope help show what the Runaway Bay job requires.

Questions people ask about boring in Runaway Bay

Does Trinity Boring Solutions take Runaway Bay jobs in Wise County, and who staffs them?

Yes. We take directional boring work in Runaway Bay, Wise County, and keep the customer working with Trinity from the first call through the bore log. Our own crews or crews from satellite yards operated by drilling partners we have vetted can handle the work. A route under US 380 still needs its own site and permit planning.

What ground should I expect on a Runaway Bay bore through Bonti soil?

The USDA soil survey maps Bonti soil and fine sandy loam in Runaway Bay, with clay and silty clay among the materials mapped at about 40 inches. Average clay content at that depth is 43 percent. Clay can hold the hole but stick to the reamer, so a route near Half Moon Way may call for staged reaming and controlled fluid.

Is there rock along a Runaway Bay bore, and how much is mapped near the surface?

Bedrock is mapped within five feet across 32 percent of Runaway Bay. The survey classifies 4 percent as hard bedrock and 28 percent as weathered bedrock, with typical bedrock depth at 31 inches. A bore near Jasper Creek Road should be planned with the chance of rock in mind, though the mapped percentages do not describe every individual route.

Who approves a Runaway Bay bore under US 380?

The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Fort Worth District reviews a US 380 crossing in Runaway Bay. We provide the bore plan and profile for the owner’s application and work under the owner’s permit. The permitted cover depth can vary by line type and the district’s requirements.

Can a line be bored under Willow Creek near Runaway Bay?

A bore under Willow Creek can be considered after the route and channel are reviewed. The creek runs along or touches the Runaway Bay boundary, so the actual crossing location matters. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the bore depth is set to pass beneath the channel.

Does the City of Runaway Bay own its water system, and does it use surface water?

The City of Runaway Bay owns the public water system, which uses surface water. Runaway Bay’s system reports 1,296 service connections for 2,458 people, so we verify marked utilities before choosing a bore path. For a bore near Runaway Bay Drive, the water line owner and exact connection still need to be confirmed before we plan the route.

What bore sizes and lengths can you handle for work near Jim Walters Drive in Runaway Bay?

For a Runaway Bay job near Jim Walters Drive, our range runs from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The line size, ground and available route determine what setup fits. A map pin and plans help us evaluate the specific crossing.

How early should I request a Runaway Bay Drive locate before boring?

For a bore along Runaway Bay Drive, request a Texas811 locate at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a crossing on Texas State Highway 114, if the start slips more than 14 days past the original notice, we make a new request. If marks wear or move near Port O Call Drive, we have them refreshed through Texas811 before work continues.

What affects the price of a Runaway Bay directional bore under US 380?

The price depends on the Runaway Bay route and scope, not a set rate. Bonti soil, possible bedrock, bore length, pipe size, utilities to expose, pavement at US 380, pits and any drainage crossing can affect the work. We account for the 206 road miles from the Yukon main office when planning mobilization to Runaway Bay. A map pin and plans help identify the factors for the job.

Where the Runaway Bay facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Runaway Bay

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Runaway Bay, Texas

Type the address of your job in Runaway Bay. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Runaway Bay

Same county: Decatur · Briar · Pecan Acres · Boyd · Rhome · New Fairview · Aurora · Alvord · Newark. All counties: Texas county list.