trinityboringsolutions.com

Breckenridge Texas Directional Boring: Bluegrove Soil, US 180 and Gonzales Creek

Quick Answer: US 180 is a major route to account for, and Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), in Breckenridge, Texas. From our Yukon, Oklahoma main office, Breckenridge is 236 road miles away, with US 183 also running through town. Bluegrove soil is common in the mapped area, and clay can cling to the reamer or grip the pipe. We adjust the drilling fluid and ream in stages to manage that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Breckenridge bores at a glance

  • County seat of Stephens County, Texas. Population 5,190 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 236 miles, about 5 hours of driving.
  • Ground: Bluegrove soil is mapped on 34 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 53 percent of the area.
  • Highways inside the boundary: US 180, US 183, FM 287 and FM 3099. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Gonzales Creek and Big Branch.
  • Public water: City of Breckenridge, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 180 in Breckenridge?

For utility routes crossing US 180, Trinity Boring Solutions handles directional boring in Breckenridge, Stephens County. The Census Bureau Vintage 2024 estimate lists Breckenridge at 5,190, while we plan underground work around each route’s site conditions. We install water, sewer, gas, electric conduit and fiber for routes along streets such as Walker Street or near US 183, choosing the bore path to fit the line and the crossing.

Our main office is in Yukon, Oklahoma, and Breckenridge work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short Walker Street service may call for a 3/4 inch line; larger work can use 48 inch casing, with bore lengths from 10 feet to 5,000 feet. When planning a bore near US 180 in Breckenridge, we draw on a family business begun in 1965 and directional boring experience since 1982.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Bluegrove soil mean for Breckenridge bores?

Bluegrove is the most common mapped soil series in Breckenridge, covering 34% of the mapped area, and Bluegrove loam with 1 to 3 percent slopes accounts for 32%. The USDA soil survey maps clay loam across 41% of the surface and loam across 32%. At about 40 inches below the surface, it maps bedrock across 43% and clay across 40%; sandy ground is not mapped at that depth. Clay can stick to the reamer and tighten around pipe, so the ground calls for controlled fluid and staged reaming.

USDA soil survey, inside the Breckenridge city limitsWhat is mapped
Soil series mappedBluegrove 34 percent, Thurber 28 percent, Gageby 13 percent, Truce 7 percent and Leeray 5 percent
Texture at the surfaceclay loam 41 percent, loam 32 percent and clay 8 percent
Texture about 40 inches downbedrock 43 percent, clay 40 percent and clay loam 13 percent
Engineering class about 40 inches downfat clay (CH) 36 percent and lean clay (CL) 20 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches53 percent of the area (7 percent hard rock, 46 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils13 percent of the area
High corrosion risk for uncoated steel84 percent of the area

The USDA soil survey maps bedrock within 60 inches across 53% of Breckenridge, with a typical depth of 29 inches; most of that mapped bedrock is weathered rather than hard. The Harpersville Formation, a Paleozoic unit with siltstone, mudstone and limestone, adds a reason to check changing ground as the bore advances. Seasonal water tables are not mapped, while flood prone soils cover 13%. High steel corrosion risk is mapped across 84%, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that steel corrosion concern.

How do crews handle bedrock and Bluegrove soil in Breckenridge?

Bluegrove clay and shallow mapped bedrock shape how we drill in Breckenridge. We expose marked lines, track the drill head and adjust the reaming plan as the ground changes near streets such as Elliott Street.

  1. Bluegrove soil is often clay loam, so we use a controlled fluid mix and staged reaming to limit sticky cuttings and keep the bore workable.
  2. Where Breckenridge’s mapped bedrock appears along a route, we slow the advance and adapt the bit if the formation changes from weathered to hard.
  3. Near Gonzales Creek, we plan the bore depth around the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
  4. At Walker Street, we hydrovac expose marked utilities before drilling near them, then track the head from the surface and log depth and pitch.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Which roads and creeks can a bore cross in Breckenridge near Gonzales Creek?

US 180 has 5.1 mapped roadway miles inside Breckenridge, and US 183 has 1.5, so a route crossing either needs a planned path beneath the road. FM 287 and FM 3099 also run inside the limits; Texas State Highway 67 is 1.4 miles outside them. Walker Street is the longest named street at 3.92 miles, followed by Elliott Street at 2.66 miles and Lindsey Street at 2.28 miles. A bore can keep pavement intact while pits sit off the crossing.

CrossingTypeMapped extentWho has a say
US 180US highway5.1 roadway miles insideState highway office
US 183US highway1.5 roadway miles insideState highway office
FM 287State highway1.2 roadway miles insideState highway office
FM 3099State highway0.6 roadway miles insideState highway office
Texas State Highway 67Highway nearby1.4 miles outsideState highway office
Gonzales CreekStream1.6 channel miles insideChecked for Corps of Engineers jurisdiction
Big BranchStream0.13 channel miles insideChecked for Corps of Engineers jurisdiction
Brown BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Rush BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Hitson BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Dry BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Grand LakeLake or pond46 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Breckenridge or within 1 mile outside the limits, and no street and rail crossings are mapped. Gonzales Creek runs 1.6 channel miles through town, and Big Branch adds 0.13 channel miles; six mapped street crossings of named streams call for route planning around water. Grand Lake is a 46 acre lake within 1 mile, but outside city limits. Creek and lake crossings are checked for federal jurisdiction during planning.

Whose permission does a bore in Stephens County need in Breckenridge?

Incorporated Breckenridge has city streets such as Walker Street and Lindsey Street, while US 180, US 183, FM 287 and FM 3099 are state roads. A bore in a state right of way needs a TxDOT utility permit, reviewed for Stephens County by the TxDOT Brownwood District. The utility owner files in TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. Under US 180, cover requirements depend on the line: electric and communication crossings need 60 inches, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. Gonzales Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Breckenridge water system?

The City of Breckenridge public water system uses surface water and reports 6,646 service connections serving 5,807 people. That existing network matters when laying out a new service near US 180 or Walker Street. Utilities reporting electric service in Stephens County include AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association and United Electric Cooperative Service. Before planning an electric conduit bore on Walker Street, we confirm the line owner for that specific Breckenridge address.

Line ownerWhat it isSourceSize
City of BreckenridgePublic water systemSurface water6,646 connections, 5,807 people served
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association and United Electric Cooperative ServiceElectric utilities reporting service in Stephens CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Breckenridge’s median housing year at 1971; 31% of homes were built before 1960, 65% from 1960 to 1999 and 4% in 2000 or later. Along older streets such as Elliott Street, a replacement bore may pass buried lines of different ages, while a newer service has its own route to clear. We hydrovac expose marked utilities on the bore path before drilling near them, since locate paint does not show depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Breckenridge from Woodson and our Yukon yard?

Breckenridge is in Stephens County, where it is the county seat, at an elevation of 1,204 feet and within 4.2 square miles. ZIP code 76424 covers the city. Woodson is 19.6 miles northwest, Moran is 20.7 miles southwest, Albany is 22.3 miles west, Ranger is 24.2 miles southeast and Eastland is 25.1 miles south. Breckenridge is 236 road miles and a 5.0 hour drive from our Yukon, Oklahoma yard, a distance that affects crew mobilization for work near US 180.

Places near Breckenridge

What would we bore near Walker Street in Breckenridge?

  • Highway crossing: A bore beneath US 180 can carry water, sewer or conduit without cutting the roadway pavement.
  • Street service: A water or sewer line along Walker Street can be routed beneath the paved crossing with entry and exit pits in the dirt.
  • Creek crossing: A bore beneath Gonzales Creek can keep the channel bank uncut while the route is checked during planning.
  • Utility replacement: A new line near Elliott Street can pass beneath pavement, with potholing to locate existing buried utilities before drilling.
  • Water connection: A service route near the City of Breckenridge water system can be planned around existing connections and marked lines.
  • Fiber conduit: A conduit route along US 183 can be bored beneath road pavement rather than opened through the crossing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Wheeler Street in Breckenridge?

A map pin matters near Wheeler Street because the exact route determines which existing lines and street crossings a bore must clear. Send the Breckenridge address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to Gonzales Creek or a nearby road.

The price reflects the ground, crossings and logistics of the specific Breckenridge route. Bluegrove clay or shallow bedrock can change drilling and reaming time; a US 180 crossing adds highway planning, while Gonzales Creek brings a water crossing into the route. Pipe size, bore length, marked utilities to expose, pavement, pits and backfill also affect the work. Mobilization from Yukon matters at 236 road miles, and emergency or high profile work can change the plan.

Questions people ask about boring in Breckenridge

Does Trinity Boring Solutions take directional boring work in Stephens County near Breckenridge?

Yes, we take directional boring work in Stephens County and staff it with our own crews or crews from vetted partner drilling contractors. Our Yukon office remains your point of contact from the first call through the bore log, including a job near US 180.

Who owns electric lines in Stephens County near Breckenridge, and who confirms conduit specs?

Electric providers reporting service in Stephens County include AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association and United Electric Cooperative Service. The line owner for a Breckenridge address must be confirmed before a conduit bore, and that owner can confirm the required conduit specifications.

Does the city control Lindsey Street in Breckenridge, and can we bore without cutting it?

Lindsey Street is a city street in incorporated Breckenridge. Directional boring can carry a utility beneath its pavement without opening a trench across the street, with pits set on either side of the crossing. The route still needs to account for marked utilities below the street.

How old are buried lines near Elliott Street in Breckenridge, and can they be replaced by bore?

The American Community Survey 2019 to 2023 estimates place Breckenridge’s median housing year at 1971, with 31% of homes built before 1960. That does not date a specific buried line, but it makes utility exposure important for a replacement bore near Elliott Street. We pothole marked lines before drilling close to them.

Will groundwater or flood prone ground affect bore pits near Gonzales Creek in Breckenridge?

Seasonal water tables are not mapped in Breckenridge, but flood prone soils cover 13% of the city area and Gonzales Creek crosses town. We check the crossing location and ground conditions before setting pits; creek routes are also checked for U.S. Army Corps of Engineers jurisdiction during planning.

Does Bluegrove soil corrode steel in Breckenridge, and what pipe should we use?

The USDA soil survey maps high steel corrosion risk across 84% of Breckenridge, where Bluegrove is the leading soil series. The line owner chooses casing and tracer wire materials for the job. HDPE is not affected by this soil corrosion concern, but the right pipe depends on the line and its specifications.

Does Trinity cover Woodson and rural sites outside Breckenridge?

We take work across Texas, including projects near Woodson and rural sites outside Breckenridge. Woodson is 19.6 miles northwest of the city, and the exact address helps us plan access, route and mobilization from Yukon for the job.

How much Texas811 notice is needed for a bore on Walker Street in Breckenridge?

For a Walker Street bore, the locate request must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Breckenridge bore start near Gonzales Creek slips more than 14 days past the original notice, we make a new request. On Wheeler Street in Breckenridge, we have worn or moved marks refreshed through Texas811 before work continues along the planned bore route.

What affects the cost of a directional bore near US 180 in Breckenridge?

US 180 adds a highway crossing to consider, while Bluegrove clay or mapped bedrock can affect drilling time. Price also depends on bore length and pipe size, utilities to expose, pavement, creek crossings, pits, backfill and equipment needs. Breckenridge’s 236 road miles from Yukon also affect mobilization.

Where the Breckenridge facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Breckenridge

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Breckenridge, Texas

Type the address of your job in Breckenridge. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Breckenridge

All counties: Texas county list.