Directional Boring Contractors in Stephens County, TX

Trinity Boring Solutions is a directional boring contractor serving Stephens County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Breckenridge. Breckenridge, the county seat, is about 237 road miles south of the Trinity main office in Yukon, Oklahoma. The usual crossings in Stephens County are US 183 and US 180, the Clear Fork Brazos River and Union Pacific track. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Stephens County, Texas

Type the address of your job in Stephens County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Stephens County?

Stephens County covers 897 square miles, has about 9,475 residents and sits in the TxDOT Brownwood District.

County seatBreckenridge
Population9,475 (2024 Census estimate), up 4.1% since 2020
Land area897 square miles
Largest cities and townsBreckenridge (5,190)
TxDOT districtTxDOT Brownwood District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association and United Electric Cooperative Service
Interstate and US highwaysUS 183 and US 180
State Highways67
RiversClear Fork Brazos River
Creeks and other streamsCaddo Creek, Cedar Creek, Gonzales Creek, Little Cedar Creek, Big Sandy Creek, Pecan Creek, Middle Fork Gonzales Creek and Sandy Creek
LakesLake Daniel and Possum Kingdom Lake
RailroadsUnion Pacific, about 6 main line miles
Average precipitation29.7 inches a year (1991 to 2020)
New housing units permitted3 in 2025
Road distance from Trinity main officeAbout 237 miles from Yukon, Oklahoma to Breckenridge
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Stephens County?

A bore in Stephens County most often has to cross a highway such as US 183, US 180 or State Highway 67, a stream such as the Clear Fork Brazos River, Caddo Creek or Cedar Creek and Union Pacific track. State Highways 67 also run through the county. The Census map names 25 larger streams in Stephens County, led by the Clear Fork Brazos River, Caddo Creek, Cedar Creek, Gonzales Creek, Little Cedar Creek and Big Sandy Creek. The rest are Pecan Creek, Middle Fork Gonzales Creek, Sandy Creek, Hubbard Creek, East Fork Gonzales Creek, Hog Branch, Dry Branch, Battle Creek, Givens Creek, Big Branch, West Fork Bufford Creek, Iron Ore Creek, Hitson Branch, Long Run Creek, Jacks Branch, North Fork Palo Pinto Creek, Finley Branch, Veale Creek and Live Oak Creek. Lake Daniel and Possum Kingdom Lake are the main mapped lakes. The federal rail map shows about 6 miles of main line track in Stephens County, owned by Union Pacific.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Stephens County?

Rock is the main thing to plan for in Stephens County: the federal soil survey records bedrock within five feet of the surface on about 65 percent of the county, a mix of hard and soft, weathered rock. Depth to rock in Stephens County is confirmed by potholing before the rig is set, and rock tooling is loaded when the path cannot avoid it. May is the wettest month in Stephens County at 3.9 inches on average and January the driest at 1.4. Stephens County averages 29.7 inches of precipitation a year, so rain delays are occasional.

  • Most common soils: Thurber (11%), Bluegrove (10%) and Bonti (9%).
  • Surface texture: most often clay loam (18%) or clay (14%).
  • Bedrock within 5 feet: about 65% of the county. It is a mix of hard rock and softer weathered rock.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 73% of the county.
  • Gravelly, cobbly or stony surface soil: about 18% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Stephens County, Texas (survey area TX429, version 24, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Stephens County?

The TxDOT Brownwood District permits bores under state highways in Stephens County, the Stephens County Commissioners Court handles county roads, and Breckenridge handles its own streets.

  • State highways. US 183, US 180, the other numbered state routes and the farm to market roads in Stephens County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under Union Pacific track in Stephens County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under the Clear Fork Brazos River, Caddo Creek or Lake Daniel is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Stephens County?

AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association and United Electric Cooperative Service serve Stephens County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas North, Oncor Electric Delivery Company and Texas-New Mexico Power are investor owned utilities; Comanche County Electric Cooperative Association and United Electric Cooperative Service are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Stephens County is planned. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Stephens County?

Stephens County permitted 3 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Stephens County went from 9,099 in 2020 to 9,475 in 2024, a gain of 4.1 percent. Bore work in Stephens County is a mix of new services and replacement of older lines.

Which Cities and Towns in Stephens County Does Trinity Serve?

Trinity takes directional boring work in Breckenridge, the only incorporated place in Stephens County with about 5,190 residents, and at sites outside the city limits.

City or town2024 population
Breckenridge5,190

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Stephens County.

Stephens County borders Eastland County, Palo Pinto County, Shackelford County, Throckmorton County and Young County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Eastland (Eastland), Palo Pinto (Palo Pinto), Albany (Shackelford), Throckmorton (Throckmorton) and Graham (Young).

Which Directional Boring Services Are Available in Stephens County?

Every Trinity service is available in Stephens County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Stephens County job before you call.

Stephens County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Breckenridge, Texas?

Yes. Trinity Boring Solutions takes work in Breckenridge and the rural parts of Stephens County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 183 in Stephens County?

The TxDOT Brownwood District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Stephens County Commissioners Court and city streets through the city.

Is there rock in Stephens County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 65 percent of Stephens County, a mix of hard and soft, weathered rock. Potholing confirms it on the actual bore path.

Can a line be bored under the Clear Fork Brazos River in Stephens County?

Yes. A drill is steered below the bed of the Clear Fork Brazos River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in Stephens County?

Union Pacific, with about 6 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in Stephens County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Stephens County?

A general range comes from the footage and the pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many Stephens County jobs.

How Do You Get a Bore Quote in Stephens County?

Call (405) 409-7423 any time or send the address in Stephens County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.