Bremond Texas Directional Boring: Crockett Loam, Union Pacific, Main Street
Quick Answer: Crockett loam is Bremond’s main mapped soil, and its clay holds a bore open but can cling to the reamer. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Bremond, including routes beneath Union Pacific track and Main Street. Our Yukon, Oklahoma main office is 341 road miles away, with Texas State Highway 14 among the local route conditions we plan around. At about 40 inches, clay covers 82 percent of mapped area, so we use controlled fluid and staged reaming.
Bremond bores at a glance
- Incorporated city in Robertson County, Texas. Population 883 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 341 miles, about 6.6 hours of driving.
- Ground: Crockett soil is mapped on 82 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 82 percent of the area.
- Highways inside the boundary: Texas State Highway 14, FM 46, FM 2293, FM 2954 and FM 1373. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
- Public water: City of Bremond, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle Bremond directional boring near Union Pacific track?
Trinity Boring Solutions takes directional boring work in Bremond, Robertson County, where Crockett loam is the main mapped soil. The Census Bureau Vintage 2024 estimate counts 883 residents in Bremond; we base underground crossing plans on site conditions, not population alone. Water, sewer, gas, electric conduit and fiber can go beneath Main Street or along routes serving homes on Commerce Street. We plan the line and bore around the route, pipe size and ground.
Our main office is in Yukon, Oklahoma, and Bremond work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965 and has done directional boring since 1982. Our no utility strike record of over 25 years matters around existing City of Bremond water lines and electric service reported in Robertson County.

What ground does a Bremond bore cross in Crockett soil?
Crockett loam is the dominant mapped soil in Bremond, covering 82 percent of the area by soil series. The USDA soil survey maps Crockett loam on 1 to 3 percent slopes across 79 percent. At about 40 inches below the surface, clay is mapped across 82 percent of the area, with an average clay content of 43 percent. For a Bremond bore at that depth, no sandy area is mapped, so we account for the mapped ground conditions when planning the crossing. This clay can hold the bore open, but it can stick to the reamer and grip pipe as it swells.
| USDA soil survey, inside the Bremond city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 82 percent, Edge 8 percent, Rader 7 percent and Chazos 3 percent |
| Texture at the surface | loam 82 percent, fine sandy loam 15 percent and loamy fine sand 3 percent |
| Texture about 40 inches down | clay 82 percent, clay loam 8 percent and sandy clay 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 89 percent and lean clay (CL) 11 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 82 percent of the area (0 percent hard rock, 82 percent weathered rock) |
| Seasonal water table within 60 inches | 7 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 89 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 82 percent of Bremond, with a typical depth of 53 inches; that points to slower drilling near the soil and rock contact. Seasonal water table conditions are mapped within 60 inches in 7 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped across 89 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that concern. The Cenozoic clayey sand and sandy clay decomposition residuum includes fine sand and sandy silty clay, which can change as the bore reaches weathered material.
How do we drill through Bremond clay?
Bremond’s Crockett loam has heavy clay below the surface, so our plan controls fluid and reamer contact. We adjust the bore to the route and the lines exposed along Main Street.
- We use a thinner drilling fluid and polymer in Bremond’s heavy Crockett clay, then open the hole in stages to limit clay buildup on the reamer.
- Because clay can swell and grip pipe, we prepare the pipe before the final reaming pass and aim to pull it through the open hole the same day.
- Near Main Street pavement, we watch fluid returns and keep pressure controlled so drilling fluid does not lift the surface.
- Before drilling near a City of Bremond water line or marked electric line, we hydrovac expose it; a walkover locator tracks the head and records depth and pitch.

What is in the way of a new line in Bremond near Main Street?
Texas State Highway 14, FM 46, FM 2293, FM 2954, FM 1373 and FM 2413 run inside Bremond, so a route that reaches a state road needs its right of way checked. Main Street is the longest named street at 1.52 miles in the city, followed by Commerce Street at 1.45 miles and Collins Street at 1.0 mile. Austin Street runs 0.98 miles. Boring can pass below paved streets and driveways without cutting through them, with entry and exit pits placed in dirt where the route allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 14 | State highway | 1.5 roadway miles inside | State highway office |
| FM 46 | State highway | 0.7 roadway miles inside | State highway office |
| FM 2293 | State highway | 0.6 roadway miles inside | State highway office |
| FM 2954 | State highway | 0.3 roadway miles inside | State highway office |
| FM 1373 | State highway | 0.3 roadway miles inside | State highway office |
| FM 2413 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.53 track miles inside | The railroad |
| Big Willow Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Copperas Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.53 track miles inside Bremond on its Ennis Subdivision, and 7 mapped street and rail crossings make track proximity a route concern. A track crossing needs an agreement from Union Pacific. No named streams are mapped inside the city, and no street crossings of named streams are mapped. Big Willow Creek is 0.6 miles from the city limits and Copperas Creek is 0.9 miles away; either would need crossing conditions checked during planning. Around Bremond, no lakes or ponds are mapped within one mile, which we consider when reviewing the underground route.
Whose permission does a Bremond bore need in Robertson County?
A bore in Bremond depends on the route: city streets such as Main Street belong to the incorporated city, while Texas State Highway 14 and the farm to market roads fall under TxDOT right of way rules. The TxDOT Bryan District reviews a utility permit for work there. The utility that owns the line submits its application through RULIS; we prepare the bore plan and profile and work under the owner’s permit. A Union Pacific track crossing requires an agreement with the railroad, which sets the crossing conditions. If a route crosses Big Willow Creek, planning checks whether the U.S. Army Corps of Engineers has jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Bremond water system?
The City of Bremond public water system uses groundwater wells and reports 621 service connections serving 858 people. That existing water network is a key locate and potholing concern for a new bore on Main Street or near other city routes. Robertson County electric service is reported by Entergy Texas, Texas-New Mexico Power, City of Bryan and Navasota Valley Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Bremond | Public water system | Groundwater wells | 621 connections, 858 people served |
| Entergy Texas, Texas-New Mexico Power, City of Bryan and Navasota Valley Electric Cooperative | Electric utilities reporting service in Robertson County | EIA Form 861 | Confirm the line owner by address |
Bremond’s American Community Survey 2019 to 2023 five year estimates place the median housing year at 1975; we assess each underground route on site. It estimates 35 percent of housing was built before 1960, 42 percent from 1960 to 1999 and 23 percent in 2000 or later. Those figures describe housing, not the age of buried lines. A replacement bore along Collins Street still needs marked utilities exposed by hydrovac before drilling near them; paint shows position, not depth.

Where is Bremond in relation to Marlin?
Bremond is in Robertson County, at an elevation of 460 feet and with 0.89 square miles of land inside its limits. ZIP code 76629 covers the city. Kosse is 10.2 miles north, Calvert is 12.9 miles south, Franklin is 14.8 miles southeast, and Marlin is 16.2 miles northwest. Franklin is the county seat; Marlin is the nearest larger city. The Yukon, Oklahoma main office is 341 road miles away, a 6.6 hour drive, so mobilization is part of planning for work on Texas State Highway 14 or a rural route.
Places near Bremond
- Directional boring in Kosse: 10.2 miles north
- Directional boring in Calvert: 12.9 miles south
- Directional boring in Franklin: 14.8 miles southeast
- Directional boring in Marlin: 16.2 miles northwest
- Directional boring in Thornton: 17.9 miles north
What would we bore near Big Willow Creek in Bremond?
- Highway crossing: A bore beneath Texas State Highway 14 needs a route plan for the road right of way and any pavement above the crossing.
- Street crossing: A new line beneath Main Street or Commerce Street can avoid an open cut through the paved route.
- Rail crossing: A line beneath Union Pacific track needs a crossing agreement and a plan that follows its conditions.
- Water service: A new connection near the City of Bremond system needs the groundwater line located and exposed before drilling nearby.
- Creek crossing: A route toward Big Willow Creek needs its channel and possible federal jurisdiction considered during planning.
- Fiber route: Conduit serving a route along Austin Street can be installed below pavement, with marked utilities exposed before the drill approaches.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Austin Street in Bremond?
For a Bremond quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. A route near Austin Street may differ from one beside Union Pacific track or Texas State Highway 14. The map pin helps us judge access, crossings and the route before we set the bore scope.
Crockett clay is the first price factor because it can stick to the reamer and grip pipe, affecting how we open and complete the bore. Length, pipe or conduit size and the utilities that must be exposed also shape the work. A Union Pacific crossing, pavement on Main Street or a route near Big Willow Creek adds crossing details to plan. Pit work, excavator time, backfill, emergency timing and mobilization from the Yukon office also affect the job price.
Questions people ask about boring in Bremond
Does Trinity take directional boring jobs in Bremond, Robertson County, and how are crews assigned?
Yes. Trinity Boring Solutions takes directional boring work in Bremond and across Texas. Our main office is in Yukon, and work is staffed by our own crews or by crews from satellite yards run by partner drilling contractors we have vetted. The customer works with Trinity through the bore log, including on a Main Street route.
Who owns electric lines in Bremond, Robertson County, and who confirms conduit specs?
Electric service in Robertson County is reported by Entergy Texas, Texas-New Mexico Power, City of Bryan and Navasota Valley Electric Cooperative. That list does not identify the provider at every address. We confirm the line owner for a proposed Texas State Highway 14 or Main Street route before planning the conduit bore, and the owner confirms its specifications.
Who is responsible for Collins Street in Bremond, and does a bore require cutting it?
Bremond is incorporated, so Collins Street is a city street. Directional boring can place a line below the paved street without cutting a trench across it; the entry and exit pits still need suitable locations. We check the marked utilities along Collins Street and expose them before drilling near them.
Does Bremond housing data on Commerce Street tell us how old buried lines are?
No. The American Community Survey 2019 to 2023 five year estimates give housing a median year of 1975, but they do not date buried pipes. With 35 percent of housing built before 1960, a replacement route near Commerce Street should be treated as a utility locating task, not as proof of a line’s age.
Can Crockett soil in Bremond corrode steel, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across 89 percent of Bremond, including areas dominated by Crockett loam. On a Bremond crossing, we coordinate with the line owner, who selects any coating for steel casing or tracer wire. HDPE is not affected by soil corrosion, but the pipe material still depends on the line and its specifications.
What kind of ground will a bore pass through in Bremond’s Crockett soil?
Crockett loam covers 82 percent of Bremond by mapped soil series. At about 40 inches below the surface, clay covers 82 percent of the mapped area and average clay content is 43 percent; 89 percent is classified CH. That sticky ground can build on a reamer, so staged opening and controlled fluid matter.
Does Trinity cover Kosse and rural sites outside Bremond?
Yes. Trinity takes directional boring work across Texas, including Bremond, Kosse and rural routes beyond city limits. Kosse is 10.2 miles north of Bremond, and the route and access determine the crew plan. A pin or address near Texas State Highway 14 helps us assess the location and crossings.
How much notice does Texas811 need for a bore on Main Street in Bremond?
For a Main Street bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For scheduling a Bremond bore, we follow Texas811 guidance that describes the notice period as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of a Bremond bore near Texas State Highway 14?
Crockett clay can increase the care needed for reaming and pipe pullback, while a Texas State Highway 14 crossing adds route and pavement details. Length, pipe or conduit size, marked utilities to expose, pits, excavator time and backfill all affect the scope. A Union Pacific crossing, creek route, emergency schedule or mobilization from Yukon can also change the price.
Where the Bremond facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bremond
- U.S. Census Bureau, TIGER/Line 2024: Bremond boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bremond
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bremond housing units and year built
- Macrostrat geologic map compilation: map units under Bremond
- U.S. EPA Safe Drinking Water Information System: public water systems serving Bremond
- U.S. Department of Transportation, North American Rail Network: track owners in Robertson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Robertson County
- U.S. Geological Survey, Elevation Point Query Service: Bremond elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bremond
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bremond
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bremond, Texas
Type the address of your job in Bremond. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bremond
Same county: Hearne. All counties: Texas county list.
