trinityboringsolutions.com

Bryan Texas Directional Boring: Zack Soil, Turkey Creek and Union Pacific Tracks

Quick Answer: Can we get a line beneath US 190 or Turkey Creek without cutting the surface? Yes, we use directional boring, also called horizontal directional drilling (HDD), for Bryan crossings and work beneath Harvey Mitchell Parkway. Our Yukon, Oklahoma main office is 380 road miles away, with Texas Avenue among the local routes that shape mobilization. Zack soil is common in Bryan, and clay at depth can cling to a reamer, so the drilling fluid and reaming plan matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bryan bores at a glance

  • County seat of Brazos County, Texas. Population 91,541 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 380 miles, about 7.4 hours of driving.
  • Ground: Zack soil is mapped on 25 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: US 190, Texas State Highway 21, Texas State Highway 6, Texas State Highway 47 and FM 2818. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: Union Pacific, with 51 mapped street and rail crossings.
  • Named streams inside the boundary: Turkey Creek, Carters Creek, Cottonwood Branch and Still Creek.
  • Public water: City of Bryan, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Bryan near Harvey Mitchell Parkway?

Can we get a line beneath Harvey Mitchell Parkway without cutting the road? We can plan a directional bore for Bryan, the incorporated county seat of Brazos County. The Census Bureau Vintage 2024 estimate puts Bryan at 91,541, a population figure we keep in view when planning underground work. We install water, sewer, gas, electric conduit and fiber lines beneath local streets such as Texas Avenue, subject to the route and utility clearances.

Our main office is in Yukon, Oklahoma, and Bryan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range covers a 3/4 inch service line near Villa Maria Road through a 48 inch casing beneath a highway, with bore lengths from 10 feet to 5,000 feet. The family business began in 1965, and we have done directional boring since 1982.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Bryan soil like to bore through Zack soil?

The USDA soil survey maps Zack as 25 percent of Bryan’s soil series. Fine sandy loam covers 71 percent of the surface, but about 40 inches down, clay loam is mapped under 32 percent of the area and clay under 16 percent. The survey reports an average clay content of 34 percent at that depth. In Bryan, we treat these mapped patterns as planning context, not as test borings that establish conditions along a bore route. Clay can stick to a reamer and grip pipe, so a bore near Zack soil calls for a fluid and reaming plan suited to the actual ground.

USDA soil survey, inside the Bryan city limitsWhat is mapped
Soil series mappedZack 25 percent, Boonville 17 percent, Sandow 8 percent, Tabor 8 percent and Zulch 7 percent
Texture at the surfacefine sandy loam 71 percent, loam 14 percent and variable 6 percent
Texture about 40 inches downclay loam 32 percent, loam 25 percent and clay 16 percent
Engineering class about 40 inches downlean clay (CL) 56 percent and fat clay (CH) 38 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches37 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel63 percent of the area
Mapped as urban land (disturbed fill)5 percent of the area

Bedrock is mapped in 1 percent of Bryan within 60 inches and in none of the area within 40 inches, so the top five feet are mostly not mapped as bedrock. The Yegua Formation, of Bartonian age, includes clay and sandstone, which can change drilling pace below the soil. A seasonal water table is mapped within 60 inches in 37 percent of the area, and flood prone soils in 9 percent. High steel corrosion risk is mapped in 63 percent, so the line owner should consider casing and tracer wire materials.

How do we bore Bryan clay loam?

Bryan’s clay loam and seasonal wet ground call for a bore plan that protects the hole and nearby pavement. The route, utility marks and actual soil conditions guide the fluid, reaming and pullback choices.

  1. Where Zack soil holds the hole open but sticks to the reamer, we can use a thinner fluid blend, staged reaming and a prompt pipe pull.
  2. With clay loam mapped under 32 percent of Bryan at about 40 inches, we watch fluid returns so pressure does not lift nearby pavement.
  3. At Turkey Creek, flood prone soils and the channel shape the planned depth; we check the crossing for possible Corps jurisdiction during planning.
  4. Where seasonal water is mapped within 60 inches, pits may need pumping; marked lines near Harvey Mitchell Parkway are exposed before drilling approaches.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What might a new line cross in Bryan near Turkey Creek?

US 190, Texas State Highway 21 and Texas State Highway 6 run through Bryan, along with Texas State Highway 47 and FM 2818. A bore beneath a highway avoids cutting the pavement, but its route and depth must meet the state permit. Harvey Mitchell Parkway is the city’s longest named street at 9.88 miles, followed by Texas Avenue at 8.41 miles and Villa Maria Road at 7.02 miles. Those long corridors can put a proposed line near several existing utilities.

CrossingTypeMapped extentWho has a say
US 190US highway14.7 roadway miles insideState highway office
Texas State Highway 21State highway28.5 roadway miles insideState highway office
Texas State Highway 6State highway19.3 roadway miles insideState highway office
Texas State Highway 47State highway14.6 roadway miles insideState highway office
FM 2818State highway11.8 roadway miles insideState highway office
Texas State Highway 6 BusinessState highway8.4 roadway miles insideState highway office
FM 158State highway5.2 roadway miles insideState highway office
FM 1179State highway2.3 roadway miles insideState highway office
Texas State Highway 30State highway2.1 roadway miles insideState highway office
FM 1687State highway1.6 roadway miles insideState highway office
FM 2154State highway1 roadway miles insideState highway office
FM 60State highway0.7 roadway miles insideState highway office
FM 974State highway0.6 roadway miles insideState highway office
Spur 231Highway nearby1.1 miles outsideState highway office
Swipe the table sideways to see every column.

Union Pacific has 21.45 track miles in Bryan, and 51 mapped street and rail crossings make track coordination relevant to route planning. Turkey Creek runs 7.37 channel miles in the city; Bryan has 95 mapped street crossings of named streams. Carters Creek and Cottonwood Branch are also present. Fin Feather Lake and Country Club Lake are inside the city limits, so a route near water needs careful planning and a check for federal jurisdiction.

Do I need a permit to bore in Bryan or Brazos County?

Since Bryan is incorporated, we treat its city streets as belonging to the city when considering a boring route. For work in the right of way of US 190, state highways or farm to market roads, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Bryan District reviews it. TxDOT rules set cover depths, and the district can require a different depth in the permit. A bore beneath Union Pacific track needs an agreement from the railroad. For a Turkey Creek crossing, we check during planning whether the U.S. Army Corps of Engineers has jurisdiction. Texas811 needs a locate request at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days before work.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water and electric lines in Bryan near City of Bryan?

The City of Bryan public water system uses groundwater wells and reports 29,354 service connections serving 91,031 people. That makes water lines a key part of planning a new service or replacement route beneath Texas Avenue. County records list Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative as reporting electric service in Brazos County. We confirm the line owner before planning an electric conduit bore because the county list does not identify the provider at every address.

Line ownerWhat it isSourceSize
City of BryanPublic water systemGroundwater wells29,354 connections, 91,031 people served
Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric CooperativeElectric utilities reporting service in Brazos CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bryan’s median housing year at 1989; 13 percent of housing was built before 1960 and 36 percent in 2000 or later. A route near older homes on Texas Avenue may involve existing lines being replaced, while newer construction can need new service. Before drilling near a marked utility, we use hydrovac potholing to expose it and verify its depth, since locate paint shows its position but not how deep it sits.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Bryan, College Station and nearby rural sites?

Bryan is in Brazos County, where it is the county seat. The city covers 55.35 square miles at an elevation of 359 feet. Its ZIP codes are 77807, 77803, 77802, 77808 and 77801. Lake Bryan is 6.2 miles northwest, and College Station is 7.5 miles southeast; Wixon Valley is 7.7 miles northeast. We take work in Bryan, College Station and rural areas around them. From our Yukon yard, the road distance is 380 miles and the drive is 7.4 hours, which can affect mobilization for a job near US 190.

Places near Bryan

What would we bore in Bryan near Texas Avenue?

  • Highway crossing: A bore beneath US 190 avoids cutting the pavement, with cover and route reviewed through the TxDOT Bryan District permit process.
  • Water service: A new connection near Texas Avenue can tie into the City of Bryan system, which draws water from groundwater wells.
  • Fiber conduit: A route beneath Harvey Mitchell Parkway can keep a fiber line out of the paved roadway and expose marked utilities first.
  • Creek crossing: A line beneath Turkey Creek needs a route planned for the channel and a check for Corps jurisdiction.
  • Rail crossing: A bore under Union Pacific track needs an agreement with the railroad that owns the line.
  • Park route: A water or sewer line near Sue Haswell Park can be planned to pass beneath paved access without an open cut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore in Bryan near US 190?

For a quote near US 190, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us understand the route. Include any known highway, track or creek crossing so we can review the path before planning the bore.

A short, open route away from utilities and pavement is simpler to plan than a crossing under US 190 or Union Pacific track. Length, pipe size, soil, exposed utilities, pavement, creek crossings, pits, excavator time and sand backfill all affect the work. Zack soil and clay loam can change the reaming plan, while Turkey Creek adds a water crossing to assess. The 380 road miles from Yukon also affect mobilization, as can an emergency schedule or a high profile route.

Questions people ask about boring in Bryan

Does Trinity take directional boring work in Bryan and Brazos County?

Yes. We take directional boring work in Bryan and across Texas. Your project is handled through Trinity, whether our own crew or a vetted partner contractor is at the site. Our main office is in Yukon, Oklahoma, and we can plan routes beneath Bryan streets such as Texas Avenue.

Can Zack soil in Bryan corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 63 percent of Bryan, so uncoated steel casing and tracer wire deserve attention. For underground work in Bryan, we consider HDPE because it is not affected by that soil corrosion concern. The line owner chooses any coating for steel, and a route near Zack soil should be evaluated against the actual materials and ground.

What ground will a bore pass through in Bryan around Zack soil?

The USDA soil survey maps Zack as 25 percent of Bryan’s soil series. At about 40 inches below the surface, clay loam is mapped under 32 percent of the area and loam under 25 percent. Clay can cling to the reamer, while the mapped shares describe broad soil patterns rather than the exact ground at a Texas Avenue address.

Could our directional bore in Bryan encounter rock along its planned underground route?

Bedrock is mapped in 1 percent of Bryan within 60 inches and in none of the area within 40 inches, so it is not commonly mapped near the surface. The geologic map identifies the Yegua Formation, of Bartonian age, with clay and sandstone. A route near Turkey Creek still needs planning for the ground actually encountered.

Who approves a bore under US 190 in Bryan?

The utility owner applies for a TxDOT utility permit through RULIS when work is in the US 190 right of way. The TxDOT Bryan District reviews the application, and the permit sets the project requirements. We provide the bore plan and profile for the utility owner’s filing.

What do I need to bore beneath Union Pacific track in Bryan?

A crossing beneath Union Pacific track needs an agreement from the railroad that owns it. That agreement sets requirements such as casing, depth and flagging. Bryan has 21.45 track miles, so we need the proposed route to identify which track crossing is involved and coordinate the bore plan accordingly.

Does Trinity cover Lake Bryan and rural sites outside Bryan?

Yes. We take work in Bryan, nearby College Station and rural sites around the area. Lake Bryan is 6.2 miles northwest of Bryan, and College Station is 7.5 miles southeast. The route, access and distance from our Yukon main office help determine how to plan a particular job.

How early should I call Texas811 for a bore near Harvey Mitchell Parkway in Bryan?

Request a Texas811 locate at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before work. If a bore near Harvey Mitchell Parkway slips more than 14 days past the original notice, make a new request. Before we continue work in Bryan, we have worn or moved marks refreshed to keep the marked locations current.

What affects the cost of directional boring near US 190 in Bryan?

The job scope sets the price, with length, pipe size, soil, utility crossings, pavement, creek crossings, pits and equipment time among the factors. A bore under US 190 or near Union Pacific track adds crossing details to plan. Zack soil can affect reaming, and the 380 road miles from Yukon can affect mobilization.

Where the Bryan facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bryan

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bryan, Texas

Type the address of your job in Bryan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bryan

All counties: Texas county list.