trinityboringsolutions.com

Kurten Texas Directional Boring: Boonville Soil, Bowman Creek and US 190

Quick Answer: US 190 is a major route to plan around, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Kurten, Texas. Bowman Creek and the town’s roads shape where a line can cross. Kurten is 389 road miles from our Yukon, Oklahoma main office, so a route near FM 2038 helps us scope access and mobilization. Boonville soil gives way to clay loam at about 40 inches, where sticky ground can grip pipe and call for staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kurten bores at a glance

  • Incorporated city in Brazos County, Texas. Population 406 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 389 miles, about 7.5 hours of driving.
  • Ground: Boonville soil is mapped on 33 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 190, FM 2038 and Texas State Highway 21. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Bowman Creek and Allcorn Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Bowman Creek in Kurten?

US 190 and Bowman Creek are the local features to check when a utility route is laid out. We take directional boring work in Kurten, Brazos County, whose population is 406 according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber, with the route set to suit a crossing on Dilly Shaw Tap Road or another named road.

Our main office is in Yukon, Oklahoma, and Kurten work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A line planned near Bowman Creek is a different scale of work, but the same careful route planning matters. Our family business began in 1965, and we have done directional boring since 1982, with Kurten 389 road miles from our Yukon main office.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show for Kurten and Boonville soil?

The USDA soil survey maps Boonville soil across 33 percent of Kurten, with Boonville fine sandy loam on 26 percent of the mapped area. Fine sandy loam is the surface texture across 77 percent. About 40 inches below the surface, clay loam is mapped under 49 percent and clay under 26 percent. Those are mapped soil patterns, not test borings. For a route near Oakland Lane, the clay below the surface can hold an open hole, stick to the reamer and swell around pipe, so the drilling fluid and reaming pace need to suit the ground.

USDA soil survey, inside the Kurten city limitsWhat is mapped
Soil series mappedBoonville 33 percent, Tabor 13 percent, Zack 11 percent, Zulch 10 percent and Mabank 7 percent
Texture at the surfacefine sandy loam 77 percent, loam 11 percent and loamy fine sand 9 percent
Texture about 40 inches downclay loam 49 percent, clay 26 percent and loam 11 percent
Engineering class about 40 inches downlean clay (CL) 66 percent and fat clay (CH) 32 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches58 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel92 percent of the area

Bedrock is not mapped in the top five feet of Kurten, which does not rule out rock at greater depth. The USDA soil survey maps a seasonal water table within 60 inches across 58 percent of the area, so pits near Bowman Creek may need pumping. Flood prone soils cover 1 percent. High steel corrosion risk is mapped across 92 percent, so the line owner should choose protection for steel casing or tracer wire; HDPE avoids that soil corrosion concern. The map also shows High gravel deposits of Cenozoic age and Middle Eocene sedimentary units, which can mean changing ground along a bore.

How do we drill Kurten clay loam?

Kurten soil shifts from fine sandy loam near the surface to clay loam at about 40 inches. On a route by Boonville soil, we plan for clay that can cling to the tooling and tighten around the installed pipe.

  1. With clay loam mapped under 49 percent of Kurten at about 40 inches, we use a thinner fluid with polymer and ream in stages to manage sticky cuttings.
  2. Where Boonville soil gives way to clay, we keep an eye on fluid returns so pressure does not lift pavement near US 190 or a town street.
  3. The seasonal water table is mapped within 60 inches across 58 percent of Kurten, so we keep pits small and pump them if water collects near Bowman Creek.
  4. Before drilling near a marked line along Oakland Lane, we expose it with hydrovac; a walkover locator tracks the head while we log depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line near Bowman Creek in Kurten?

US 190, FM 2038 and Texas State Highway 21 all run inside Kurten, so a route crossing one of them needs its own depth and access plan. The named streets give more choices for a local approach: Dilly Shaw Tap Road runs 1.49 miles within town, Oakland Lane 0.81 miles and Kurten Cemetery Road 0.75 miles. A bore can pass beneath pavement rather than cutting across it, but the road authority and the utility owner need to be part of the highway crossing plan.

CrossingTypeMapped extentWho has a say
US 190US highway2.7 roadway miles insideState highway office
FM 2038State highway5.9 roadway miles insideState highway office
Texas State Highway 21State highway5.5 roadway miles insideState highway office
Bowman CreekStream1.4 channel miles insideChecked for Corps of Engineers jurisdiction
Allcorn CreekStream0.25 channel miles insideChecked for Corps of Engineers jurisdiction
Sand CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Mathis CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Robertson BranchStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Kurten or within one mile outside its limits, so there is no mapped track crossing to plan around. Bowman Creek runs 1.4 channel miles in town and Allcorn Creek runs 0.25 miles; the mapped street inventory shows one crossing of a named stream. No lakes or ponds are mapped within one mile of Kurten, so we consider Bowman Creek when planning boring work. A bore near Bowman Creek needs a route and pit plan that accounts for the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Do I need a permit to bore under US 190 in Kurten?

For a bore in the US 190, FM 2038 or Texas State Highway 21 right of way, the utility owner applies for a TxDOT utility permit through RULIS, reviewed by the TxDOT Bryan District. We provide the bore plan and profile for the utility owner’s filing. Under US 190, electric and communication lines need 60 inches of cover below the lowest crossed grade; water and pressurized sewer lines also need 60 inches at crossings. TxDOT rules call for boring or tunneling beneath existing highway pavement, with casing and a bore extending beneath all travel lanes on rural highways. Kurten is incorporated, so we recognize Oakland Lane as a city street and plan our boring work with that ownership in mind. No railroad is mapped nearby; if a proposed route reaches a track, the railroad that owns it sets the crossing agreement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Brazos County near Kurten?

The water provider for a specific Kurten address must be confirmed with the city, Brazos County or the local water district before a bore is planned. EPA drinking water records do not tie a system to Kurten by name, so we cannot match a provider to an address from those records. Electric utilities reporting service in Brazos County include Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative. Before a conduit bore near Dilly Shaw Tap Road, the line owner must be confirmed and marked lines exposed with hydrovac potholing.

Line ownerWhat it isSourceSize
Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric CooperativeElectric utilities reporting service in Brazos CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Kurten’s median housing year is 1990 in the American Community Survey 2019 to 2023 five year estimates, and we consider the Boonville soil series in underground planning. The survey estimates 15 percent of homes were built before 1960, 56 percent from 1960 to 1999 and 29 percent in 2000 or later. A replacement bore along Oakland Lane may encounter older lines, while newer services still need their own route checked. We pothole marked utilities before drilling near them because surface paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Kurten and nearby Wixon Valley?

Kurten is in Brazos County at an elevation of 337 feet and covers 4.55 square miles. The town’s ZIP code is 77808. Wixon Valley is 3.1 miles southwest, Bryan is 10.6 miles southwest, Iola is 11.8 miles east, Lake Bryan is 12.6 miles southwest and College Station is 14.2 miles south. Bryan is both the nearest larger city and the county seat. From our Yukon, Oklahoma main office, the drive to Kurten is 389 road miles and about 7.5 hours, which we account for when planning a job near US 190.

Places near Kurten

Which jobs call for a bore along Kurten Cemetery Road?

  • Highway crossing: A route beneath US 190 needs a TxDOT permit plan, the required cover and a bore extending beneath all travel lanes on a rural highway.
  • Water service: A new service near Kurten Cemetery Road starts with confirmation of the address water provider and a route clear of marked utilities.
  • Fiber route: Fiber conduit along Dilly Shaw Tap Road can pass below pavement instead of cutting the street surface.
  • Creek crossing: A line near Bowman Creek needs depth and pit planning, plus a check for U.S. Army Corps of Engineers jurisdiction.
  • Electric conduit: Near Oakland Lane, we confirm which Brazos County utility owns the line and expose marked utilities before drilling.
  • Sewer replacement: A bore near US 190 can replace a buried line while keeping the highway pavement uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Dilly Shaw Tap Road in Kurten?

Send a map pin for the exact spot, especially if the route is near Dilly Shaw Tap Road or Bowman Creek. That location shows us which road, drainage or property access may shape the bore. We also need what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route before quoting.

A short, clear route through Boonville fine sandy loam is simpler to plan than a longer bore through sticky clay loam. Price also reflects pipe size, footage, utilities to cross and expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. A US 190 crossing brings highway requirements into the scope, while Bowman Creek may add crossing review and access planning. Kurten’s 389 road miles from Yukon also affect mobilization.

Questions people ask about boring in Kurten

Does Trinity take directional boring jobs in Kurten, Brazos County, and who staffs them?

Yes. We take directional boring work in Kurten, and our own crews or crews from satellite yards operated by vetted drilling partners handle the field work. You work with Trinity from the first call through the bore log, no matter which crew is on site. That applies to a route near Bowman Creek as well as one by US 190.

Who is responsible for Kurten Cemetery Road, and does a bore require cutting it?

Kurten Cemetery Road is a city street because Kurten is incorporated, and we plan our boring work with that city ownership in mind. A bore can pass beneath Kurten Cemetery Road without cutting the pavement, driveway or sidewalk. The route still needs to be planned around marked utilities and the street’s access conditions, with the city street authority involved in decisions about work in its street.

How old are homes and buried lines near Oakland Lane in Kurten?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1990, with 15 percent of homes built before 1960. That does not establish the age of any buried line on Oakland Lane. For a replacement bore, we expose marked utilities first and plan the new route around what is found underground.

Can groundwater or flood prone soil affect bore pits near Bowman Creek in Kurten?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 58 percent of Kurten, so pits near Bowman Creek may collect water and need pumping. Flood prone soils are mapped across 1 percent of the area. We plan the crossing depth beneath the channel and check for U.S. Army Corps of Engineers jurisdiction.

Does Boonville soil in Kurten corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 92 percent of Kurten. The line owner chooses coatings for steel casing or tracer wire. HDPE does not share that soil corrosion concern. Along a route near Kurten Cemetery Road, the material decision belongs in the plan before the bore is set.

What ground does a bore pass through in Kurten Boonville soil?

Boonville is mapped across 33 percent of Kurten, and fine sandy loam is the surface texture across 77 percent. At about 40 inches, clay loam is mapped under 49 percent and clay under 26 percent. Those are USDA soil survey patterns, not test borings. The deeper clay can stick to the reamer and grip pipe, so we stage the reaming.

Can I reach Trinity after hours about an urgent bore on Kurten Cemetery Road?

Yes. A person answers Trinity’s phone, (405) 409-7423, 24 hours a day. If an urgent bore is needed near Kurten Cemetery Road, share the location and what line needs to go in so we can understand the request. Emergency work can affect the job scope and mobilization.

How much notice does Texas811 need for a bore on Dilly Shaw Tap Road in Kurten?

Paint along Dilly Shaw Tap Road shows a line’s position, not its depth, so marked utilities still need to be exposed before drilling nearby. Texas811 needs a request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the notice, make a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of directional boring under US 190 in Kurten?

The scope drives the price. Length, pipe or conduit size, Boonville soil, utilities to cross and expose, pavement, pits, creek crossings and mobilization all matter. A US 190 crossing needs a TxDOT permit plan and highway cover requirements, while work near Bowman Creek can add crossing and access planning. The exact route and ground conditions decide how much work is involved.

Where the Kurten facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kurten

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kurten, Texas

Type the address of your job in Kurten. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kurten

All counties: Texas county list.