Wixon Valley Texas Directional Boring: Boonville Soil, US 190 and Mathis Creek
Quick Answer: Wixon Valley is an incorporated small city, so its city streets, including Dilly Shaw Tap Road, belong to the city. We take directional boring, also called horizontal directional drilling (HDD), work in Wixon Valley for routes that cross US 190. The Yukon, Oklahoma main office is 386 road miles away, with Bryan 7.7 miles southwest of Wixon Valley. Boonville fine sandy loam is mapped across 28 percent of the city, and clay loam below can hold an open hole and grip pipe.
Wixon Valley bores at a glance
- Incorporated city in Brazos County, Texas. Population 233 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 386 miles, about 7.5 hours of driving.
- Ground: Boonville soil is mapped on 28 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 190, FM 2776 and Texas State Highway 21. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Wixon Valley and Mathis Creek?
Wixon Valley is a city in Brazos County, with a population of 233 according to the Census Bureau Vintage 2024 estimate. We take directional boring work here for water, sewer, gas, electric conduit and fiber lines. A service line along Wixon Road or a route toward Mathis Creek needs a plan that fits its actual path, ground and crossings.
Our main office is in Yukon, Oklahoma, and Wixon Valley work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical Wixon Valley job is much shorter, such as a service route near US 190. For directional boring near US 190, our family business dates to 1965, and we have done this work since 1982.

How does Boonville soil affect drilling in Wixon Valley?
The USDA soil survey maps Boonville soil across 28 percent of Wixon Valley, mostly as Boonville fine sandy loam, with 1 to 3 percent slopes. Zack fine sandy loam accounts for 24 percent and Zulch fine sandy loam for 17 percent. At about 40 inches below the surface, clay loam is mapped under 46 percent of the area, while clay is mapped under 8 percent. The average clay content at that depth is 31 percent. These are mapped patterns, not test borings, so the route still needs field review.
| USDA soil survey, inside the Wixon Valley city limits | What is mapped |
|---|---|
| Soil series mapped | Boonville 28 percent, Zack 24 percent, Zulch 17 percent, Robco 11 percent and Tabor 7 percent |
| Texture at the surface | fine sandy loam 77 percent and loamy fine sand 22 percent |
| Texture about 40 inches down | clay loam 46 percent, loam 24 percent and sandy clay loam 15 percent |
| Engineering class about 40 inches down | lean clay (CL) 68 percent, fat clay (CH) 25 percent and silty sand (SM) 7 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 47 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 89 percent of the area |
The USDA soil survey maps a seasonal water table within 60 inches under 47 percent of Wixon Valley, which can mean wet pits that need pumping. For boring depth planning around Wixon Road, we account for the fact that bedrock is not mapped in the top five feet. The Yegua Formation, of Bartonian age, includes claystone and sandstone, but the map does not establish the material at a specific bore. High steel corrosion risk is mapped under 89 percent of the area, so the line owner should address casing and tracer wire materials. We plan crossings near Mathis Creek with the knowledge that flood prone soils are not mapped.
How do we drill Wixon Valley’s clay loam?
Boonville fine sandy loam at the surface and mapped clay loam below call for a plan that fits the route. Near Wixon Road or US 190, we control fluid and reaming to protect the hole and pavement.
- In Boonville fine sandy loam, we use drilling fluid to help hold the sandy ground open, then stage the reaming so the hole is ready for the line.
- Where the mapped clay loam lies below Wixon Valley’s surface soils, thinner fluid and polymer can reduce sticky cuttings and pipe grip during a pull.
- With a seasonal water table mapped within 60 inches under 47 percent of the area, we keep pits manageable and pump water when needed.
- Near US 190 pavement, we control fluid pressure and track the drill head from the surface, recording depth and pitch as the bore advances.

What might a new line cross in Wixon Valley near Dilly Shaw Tap Road?
US 190, FM 2776 and Texas State Highway 21 run inside Wixon Valley. A bore in their right of way follows TxDOT requirements, while a route along Dilly Shaw Tap Road, Endeavor Loop or Wixon Road has to account for city street access and existing utilities. Dilly Shaw Tap Road is the longest named street mapped in the city at 1.3 miles. Endeavor Loop measures 0.79 miles and Wixon Road 0.55 miles. The street and highway crossing plan affects bore length, pits and the work area.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 190 | US highway | 1.1 roadway miles inside | State highway office |
| FM 2776 | State highway | 2.3 roadway miles inside | State highway office |
| Texas State Highway 21 | State highway | 2.3 roadway miles inside | State highway office |
| Mathis Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Wickson Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Wickson Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Wixon Valley or within 1 mile outside its limits, so a rail agreement is not part of the mapped local crossing picture. No named streams are mapped inside the city, and no mapped street crossings of named streams are recorded there. Mathis Creek is 0.1 miles from the city limits, Wickson Creek is 0.5 miles away and Little Wickson Creek is 0.8 miles away. A route reaching a creek needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction. Along FM 2776, our underground routing considers that no lakes or ponds are mapped within 1 mile.
Who approves a Wixon Valley bore under US 190?
For work in the right of way of US 190, FM 2776 or Texas State Highway 21, the utility owner files the application in TxDOT’s online RULIS system, not the drilling contractor. We provide the bore plan and profile for the utility owner’s filing, and the TxDOT Bryan District reviews it. TxDOT’s cover rules set 60 inches at highway crossings for electric and communication lines and 60 inches for water lines; along the right of way, the respective depths are 48 inches and 36 inches. Pressurized sewer crossings need 60 inches of cover. The permit can set another depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Wixon Valley, Brazos County?
The provider serving a specific Wixon Valley address could not be matched from the available EPA drinking water records. Before a bore is planned, the water provider for that address has to be confirmed with the city, Brazos County or the local water district. Utilities reporting electric service in Brazos County include Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative. The line owner must be confirmed before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative | Electric utilities reporting service in Brazos County | EIA Form 861 | Confirm the line owner by address |
We treat Wixon Valley’s median housing year of 1994 from the American Community Survey 2019 to 2023 five year estimates as background, not a substitute for checking underground conditions. The survey estimates 2 percent of homes were built before 1960, 56 percent from 1960 to 1999 and 42 percent in 2000 or later. That mix can mean a replacement route beside older services or a new connection near newer housing. Before a bore along Endeavor Loop reaches a marked line, we expose each marked utility by hydrovac potholing; paint shows position, not depth.

What is near Wixon Valley and Bryan?
Wixon Valley is in Brazos County, covers 1.79 square miles and sits at an elevation of 334 feet. Its ZIP code is 77808. Kurten is 3.1 miles northeast, while Bryan, the county seat and nearest larger city, is 7.7 miles southwest. Lake Bryan is 9.6 miles west, College Station is 12.5 miles south and Iola is 14.3 miles east. From Trinity’s Yukon, Oklahoma main office, the road distance is 386 miles and the drive is 7.5 hours. That distance is part of planning mobilization for a Wixon Valley bore.
Places near Wixon Valley
- Directional boring in Kurten: 3.1 miles northeast
- Directional boring in Bryan: 7.7 miles southwest
- Directional boring in Lake Bryan: 9.6 miles west
- Directional boring in College Station: 12.5 miles south
- Directional boring in Iola: 14.3 miles east
What would we bore near Endeavor Loop in Wixon Valley?
- Highway crossing: A route beneath US 190 is bored rather than open cut, with the utility owner arranging TxDOT review for right of way work.
- Street service: A water or sewer service along Wixon Road can use entry and exit pits instead of an open cut across the street.
- Fiber conduit: A fiber route near Endeavor Loop can be sized and planned around marked utilities before the drill approaches them.
- Creek approach: A proposed route toward Mathis Creek needs depth planning for the channel and a jurisdiction check during planning.
- Electric conduit: A conduit route near Dilly Shaw Tap Road starts with confirming the electric line owner and exposing marked utilities in the bore path.
- Water service: A connection near Kurten Cemetery Road needs the address specific water provider confirmed before the bore plan is set.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Wixon Valley bore near Kurten Cemetery Road?
For a route near Kurten Cemetery Road, start with the address or a map pin so we can place the work. Tell us what goes underground, such as water or fiber, then give the pipe or conduit size and the footage. A sketch or plans help show whether the path approaches US 190, a city street or a drainage crossing.
The Yukon office is 386 road miles from Wixon Valley, so mobilization is part of the job scope. Boonville soil and clay loam can affect drilling time and fluid needs. The price also reflects bore length, pipe or conduit size, utilities to expose, pavement, pits and excavator time. A route crossing US 190 or reaching Mathis Creek adds permit or crossing planning. For Texas State Highway 21, we account for possible scope changes from high profile or emergency work and the TxDOT Bryan District permit office.
Questions people ask about boring in Wixon Valley
Does Trinity Boring Solutions take jobs in Wixon Valley, Brazos County, and how are crews assigned?
Yes. Trinity takes directional boring work in Wixon Valley, Brazos County. We handle the job from the first call through the bore log, whether our own crew or a vetted partner contractor’s crew is on site. For a route near Dilly Shaw Tap Road, the specific address and scope help us plan the work.
Who approves a bore under US 190 in Wixon Valley, and which state office reviews it?
The utility owner applies for a TxDOT utility permit when work uses the US 190 right of way. The TxDOT Bryan District reviews the filing through the online RULIS system. We provide the bore plan and profile for the owner’s application, and the permit sets the approved details for the crossing.
Can a line be bored under Mathis Creek near Wixon Valley?
A bore may be planned for a route under Mathis Creek, but the route and channel conditions need review first. Mathis Creek is 0.1 miles from Wixon Valley’s limits, and a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We need the location and line details to assess the approach.
Who owns electric lines in Wixon Valley, Brazos County, and who confirms conduit specs?
The specific electric line owner must be identified before a conduit bore is planned. Utilities reporting service in Brazos County include Entergy Texas, City of Bryan, City of College Station, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative. The line owner confirms conduit requirements for a route such as one near US 190.
Does the city or county control Wixon Valley streets like Wixon Road, and must a bore cut the road?
Wixon Valley is incorporated, so its city streets belong to the city itself; Brazos County does not own those city streets. A bore along Wixon Road can pass beneath the street without an open cut. The route still needs utility locates and planning for pits on either side.
What do Wixon Valley housing ages near Endeavor Loop mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1994, with 56 percent of homes built from 1960 to 1999. Near Endeavor Loop, a project could replace an older service or add a line for newer housing. We expose marked utilities before drilling close to them.
How much notice does Texas811 need for a Wixon Valley bore on Dilly Shaw Tap Road?
Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays. For a bore on Dilly Shaw Tap Road, the request cannot be earlier than 14 days before work, and the ticket has a 20 day life. If the start slips more than 14 days past the original notice, submit a new request; refresh marks that wear off or move.
How far is Wixon Valley from Bryan and Trinity’s Yukon main office, and does that affect the job?
Bryan is 7.7 miles southwest of Wixon Valley, while Trinity’s Yukon, Oklahoma main office is 386 road miles away, a 7.5 hour drive. That distance can affect mobilization for a bore near US 190. The route, soil and equipment needs also shape the work plan.
What affects the cost of directional boring in Wixon Valley near US 190?
The job scope determines the price, not a single local rate. For a US 190 route, factors include length, pipe size, TxDOT coordination, pavement and utilities to expose. Boonville soil and clay loam can affect drilling conditions; pits, excavator time, creek or drainage crossings and mobilization from Yukon also matter.
Where the Wixon Valley facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Wixon Valley
- U.S. Census Bureau, TIGER/Line 2024: Wixon Valley boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Wixon Valley
- U.S. Census Bureau, American Community Survey 2019 to 2023: Wixon Valley housing units and year built
- Macrostrat geologic map compilation: map units under Wixon Valley
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Brazos County
- U.S. Geological Survey, Elevation Point Query Service: Wixon Valley elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Wixon Valley
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Wixon Valley
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Wixon Valley, Texas
Type the address of your job in Wixon Valley. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Wixon Valley
All counties: Texas county list.
